Install the Blink Home Monitor app and follow the on-screen instructions to set up the Blink video doorbell safely. Gather the screws, mounting brackets, wedge, drilling tools, sync modular, and smartphone to avoid last-minute hassle. The Blink app asks multiple questions about the type of doorbell to sync module, chime, and voltage checks for safety. It provides instructions to turn off the power before installing the wired doorbell. Prepare the installation area and tighten the screws manually to avoid damaging the plastic base plates. Connect the wires to the right terminals and connect the doorbell to Wifi to run a test. The Blink app also guides users to check if the transformer is compatible or not. Make sure to install the Sync module near the doorbell for a smooth experience. This guide explains how to set up a wired and wireless Blink doorbell without technical assistance. Follow the right instructions to avoid red light, slow-motion alerts, and wifi troubleshooting problems.

What Do You Need Before Installing a Blink Video Doorbell?

Here are the seven things that are required to set up the Blink video doorbell:

1. Blink Video Doorbell Device: Blink video doorbells are available as a standalone option in case homeowners already have other components. This doorbell device costs around $49.99 to $69.99 with the main device unit.
2. AA Lithium Batteries: Wired and Wireless blink both run on AA non-rechargeable lithium batteries as their primary power source. Make sure to purchase two batteries before starting to set up the doorbell.  
3. Mounting Bracket & Screws: Mounting brackets, wedge, base plate, and all the screws come in the doorbell box. Verify all components to avoid the last-minute hassle.
4. Basic Tools: Keep the screwdriver to tighten the screws and the drill to drill holes in hard surfaces. Apart from these, make sure to wear gloves and follow the safety measures when installing the wired Blink doorbell. Keep a microfiber to clean the dust when removing the old doorbell.
5. Smartphone with Blink App: Install the Blink Home Monitor app in the smartphone to connect and control it inside the home. The app helps to set up and configure the Blink doorbell. It also works with the Amazon Alexa app, so choose the one that meets the requirements.
6. Stable Wi-Fi Connection: Install the 2,4 GHZ wifi network near the doorbell to get instant alerts and avoid using a hotspot to set it up. A stable wifi connection makes it easy to access the live camera and communicate with the person at the door.
7. Optional Sync Module: Amazon introduced the Sync Module 2 for Blink Gen-2 doorbells. This device helps to manage 10 devices at a time and conserve the battery. The sync module is optional, as doorbells work effectively even without it. It allows users to download the recording in local storage without getting a subscription.

How Do You Choose Between Wired and Wireless Installation?

Here are the tips to choose between wireless and wired setups:

1. Wireless Setup: Choosing the battery-powered or wired setup depends on the needs of the homeowner. Wireless setup runs on AA batteries, and it's best for renters. This doorbell does not require wiring or drilling and can be mounted anywhere. People often install it on the front, back door, backyard, or garden.
2. Wired Setup: Wired doorbells connect with existing wiring and provide consistent power. Make sure to check the transformer compatibility (voltage) before setting up the device. Wired blink doorbells are best for people who own the home and do not want to replace batteries over time.

How Do You Prepare the Installation Area?

Remove the old doorbell and clean the area with a wet microfiber to remove debris. Mark the area above 48 inches from the ground if installing the doorbell for the first time. Check the field of view and the Wi-Fi signal strength. Turn off the breaker and wear safety gloves in case of wired doorbells.

How Do You Install the Mounting Bracket?

Use the wedge as a template against the surface and mark the screw points. Use a drill machine to drill holes and insert anchors if required. Tighten the screws slowly to avoid damaging the plastic wedge. Attach the mounting plate to the wires at the right terminals when setting up the wired doorbell and secure it with screws. Blink Home Monitor guides you at every step when installing the doorbell with pictures and tips.

How Do You Install a Blink Doorbell (Wireless Setup)?

Insert the AA non-rechargeable lithium batteries into the wireless batteries. Slide them down on the mounting plate until a click sound is produced. Make sure the red light flashes around the button to indicate the power supply. Wireless Blink doorbell batteries last for 2 years when used according to the manufacturer's instructions. 

How Do You Install a Blink Doorbell (Wired Setup)?

Connect the wires to the terminals, as polarity does not affect the power supply, after preparing to mount the bracket. Secure the doorbell on the plate with a click sound. Make sure to turn on the power from the breaker and check for the red light indicator on the power button. Verify the voltage of the transformer and set up the chime near the doorbell to receive alerts without lags.

How Do You Set Up a Blink Video Doorbell in the Blink App?

Open the Blink Home Monitor and tap on the “+” icon in the top right corner. Look for the devices and click on the Blink video doorbell. A camera interface pops up to scan the QR code on the back of the doorbell, or a user can enter it manually. 

How Do You Connect a Blink Doorbell to a Sync Module?

The app asks to create a system and name it anything. Tap on the right answers and enter the QR code from the back of the sync module if you have a sync module. Insert the USB in the module port to download the recordings to local storage. Blink Home Monitor provides step-by-step guidance to set up the doorbell and then ends with an instruction to press the button.

How Do You Test the Blink Video Doorbell After Setup?

 “Connected” message pops up when the Blink app connects with the doorbell. Hit continue, and then the app asks for a mechanical or digital chime. Choose the one that is available and then test the sound to complete the installation process. Open the live view camera from the app and test the video quality and two-way communication system. 

What Settings Should You Customize After Installation?

Adjust the privacy zones and motion detection alerts for packages or a person. Customize the press announcements and voice commands according to the needs. Set clip length, notification timings, and volume. Blink does not support the familiar face detection and AI alerts.

What Are Common Installation Issues and How Do You Fix Them?

Here are the four common Blink installation issues and their solutions:

1. Doorbell not powering on: Check that the wires are connected to the terminals and batteries are working. A stable wifi connection and following the on-screen setup instructions prevent this issue.
2. Wi-Fi connection fails: Install the 2.5GHz Wifi network and set up the router near the doorbell to receive alerts without delays.
3. Motion alerts are not working: Check the wifi connection and selected privacy zones.
4. Chime not ringing (wired): Check the voltage compatibility of the chime and the power supply to make the chime ring.