Ring Wired Doorbell Pro Doorbell Brick Face Extension - 9/16in Wide - No Offset Extender Pro2
Ring Gen 2 Battery Doorbell Centered Brick Face Mount (9/16" Base, Flush Fit)
Eufy Doorbell Centered Brick Face Extension Mount (Flush Fit to Brick Face)
Ring Wired Doorbell Plus Doorbell Brick Face Extension - No Offset Center (Old Ring Pro (will not fit pro2)
Blink Doorbell Centered Brick Face Extension Mount (Flush Fit)
Ring Video Doorbell Wired Brick Face Extension Centered with No Offset - 9/16in Wide Base
Brick Face Extension | Universal Mount Selection|Extend to Face of Bricks Centered over Old Doorbell
Brick Face Extension | Ring 2/3/Plus/Pro Battery Doorbell | Extend to Face of Bricks
Blink 2nd Generation Doorbell Centered Brick Face Extension Mount (Flush Fit)
Doorbell Brick Face Extensions (Centered & Flush Fit Design)
Achieve a Perfectly Flush Doorbell Installation on Brick or Stone!
Our **Centered Brick Face Extension Mounts** are meticulously designed to extend your video doorbell forward from recessed trim, positioning the front face of your doorbell nearly level with the surrounding brick or stone. This creates the cleanest, most integrated look possible.
These mounts are **centered (no sideways offset)** and are ideal when your mounting trim is wide enough to support the full width of your doorbell. They are available in various extension lengths to match your specific needs. You MUST select your doorbell model and the measured extension length on the product page.
(This type of mount is not for narrow spots where the doorbell itself is wider than the trim; for those situations, please see our "Offset Brick Extensions".)
Why Our Centered Brick Face Extensions?
Choosing a DoorbellMount.com Brick Face Extension offers several advantages:
- Sleek "Face Flush" Appearance: The primary goal is to align the front of your doorbell with the brick face for a minimalist, built-in aesthetic.
- Centered Positioning: Provides a balanced, straight-on view (no sideways angle or offset).
- Custom Fit: When you select your doorbell model and provide the "Trim to Brick Face" measurement, we create a mount tailored to your setup.
- Improved Camera View: Eliminates obstructions from deep-set brick, allowing your camera to see clearly.
- Enhanced Accessibility: Makes your doorbell button easy for visitors to reach.
- Avoids Drilling Masonry: Mounts to your existing door trim.
- Durable & Weather-Resistant: Made from high-quality PETG to withstand outdoor conditions.
- Clean Wire Management: Allows wires to pass through the center of the mount.
CRITICAL: How to Measure for Extension Length (Face Flush Goal)!
To achieve the "Face Flush" look where the front of your doorbell is level with the brick, you need to order the correct extension length based on this measurement:
- Measure the exact distance straight out from the **surface where the mount base will attach** (your wood trim) to the **outermost FACE of your brick or stone**.
- Select THIS measurement as the "Extension Length" when ordering your Centered Brick Face Extension.
- We will then calculate the necessary adjustments to the mount's actual printed depth to ensure that when your specific doorbell model is attached, its front face will sit approximately flush with the brick.
Example: If the distance from your wood trim to the face of your bricks is **3 inches**, you would select "3 inches" as the Extension Length. We take care of the rest to make the doorbell face flush.
(For ultimate precision, especially if you already have your doorbell: you can also measure from the trim to where the BACK of your doorbell would need to sit for its FACE to be flush with the brick. If you provide this "trim-to-back-of-doorbell" measurement in the order notes, we can use that.)
Need help measuring? Text/email a picture of your setup! (Contact info below)
Measure from Trim to Brick Face for this mount type.
Explore Our Centered Brick Face Extensions:
(The product below is a universal listing where you will select your specific doorbell model and the required "Trim to Brick Face" extension length.)
Centered Brick Face Extension Mount (Select Model & Length)
Our primary solution for achieving a perfectly centered, face-flush doorbell installation. Choose your doorbell brand/model and the measured "Trim to Brick Face" length on the product page. Base width is typically 9/16" or 3/4" depending on doorbell model requirements for centering.
Shop Centered Face Flush Extensions
Compatible with Ring, Nest, Eufy, Blink, Wyze, Lorex, SimpliSafe, TAPO, Ubiquiti & more (select model).
What is a Doorbell Brick Face Extension?
A Doorbell Brick Face Extension from DoorbellMount.com is an innovative 3D-printed solution that positions your video doorbell forward from recessed trim so its front face aligns beautifully with your brick or stone exterior. It adds both style and practicality, ensuring your doorbell is visible, accessible, and captures the best view, enhancing your home's curb appeal and security.
Benefits of Using Our Brick Face Extensions
These centered extensions provide a sturdy, weather-resistant mounting surface tailored to your doorbell model. They allow for a clean, professional installation, eliminating unsightly gaps and the need for complex wall modifications, giving your entryway a modern, integrated look.
Easy Installation Concept
Installation is manageable for DIY enthusiasts. Secure the extension base to your trim (after selecting the correct measured length), attach the model-specific adapter bracket, and then mount your doorbell. This straightforward process enhances your security efficiently.
Achieve the Perfect Flush Mount for Your Doorbell!
Our Centered Brick Face Extensions are the ideal choice for a sleek, professional installation against brick or stone, provided your trim is wide enough to support your doorbell. Remember to measure accurately and select your specific doorbell model.
If you have questions, very narrow trim (requiring an offset mount), or unique needs, please contact us!
Questions About Measurements or Compatibility?
Unsure if this "Face Flush" centered extension is right for your trim width? Need help with the "Trim to Brick Face" measurement?
- Email: shop@doorbellmount.com (Send pictures of your mounting area & doorbell!)
- Text/Call: 1-833-326-6868 (Text pictures!)
Standard Color: Mounts typically ship in Black. White or other colors can be requested via our Color Change Request add-on.
Doorbell Not Included: All listings are for the brick face extension mounting accessories only. The video doorbell device must be purchased separately.
Model & Length Selection is CRUCIAL: You must select your specific doorbell model for the correct adapter bracket AND carefully provide the "Trim to Brick Face" measurement for the "Extension Length" to achieve the desired flush fit.
Trim Width Requirement: This centered mount requires your trim/mounting surface to be at least as wide as your doorbell to prevent overhang. For narrower trim, consider our "Offset Brick Extensions."
3D Printed Quality: Our mounts are produced using durable PETG 3D printing. Minor cosmetic variations or layer lines may be visible but do not affect durability or function. Your satisfaction is guaranteed.
