Standard Offset Brick Extension |for Ring Battery Doorbell Plus (& 2/3/4) |Get Better View
Brick Extension Mount - 9/16in Wide, Standard Offset | Universal Fit Mount
Ring Battery Doorbell Plus Brick Extension - 9/16in Wide - FULL Offset Over Side of Brick
Ring Battery Doorbell Pro Brick Extension Mount - 9/16in Wide - 5/8" Standard Offset
Ring Battery Doorbell PRO Brick Extension - 9/16in Wide - FULL Offset Over Side of Brick
Brick Face Extension | Universal Mount Selection|Extend to Face of Bricks Centered over Old Doorbell
Adjustable Depth Extendable Doorbell Mount | Optional Angle | Universal Selection
Ring Battery Doorbell Pro Brick Extension Mount - 9/16in Wide - 5/8" Standard Offset
Mounts for Ring Battery Doorbell Plus (& Similar Removable Battery Models)
Identifying Your Ring Doorbell (Removable Battery Series)
This collection primarily features mounts designed for the **Ring Battery Doorbell Plus**. However, the adapter bracket system used is also compatible with other Ring Video Doorbells that share the same **Removable Battery** and **4-screw mounting pattern** (2 near the center, 2 near the bottom, revealed after removing the faceplate). This includes models like Ring Video Doorbell 2, 3, 3 Plus, 4, and Battery Doorbell Pro.
Key Identifying Feature: Your doorbell must have a **faceplate that comes off** to access a removable battery and reveal the 4 mounting screw holes.
Left: Example of Ring doorbell with faceplate off. Right: Our compatible 4-screw adapter bracket.
This will NOT fit Ring models with integrated (non-removable) batteries like the Ring Video Doorbell (Gen 2 / 2020 release) or any Pro/Wired series with different backs. Please consult our Ring Model Identification Guide or contact us with a picture if unsure!
(Affiliate Link)
Why Our Brick Extensions for Your Ring Battery Doorbell Plus?
Our Brick Extension Mounts solve common installation problems when mounting these Ring models on trim that is recessed behind brick or stone:
- Custom-Fit Adapter Bracket: The top bracket uses the 4-screw mounting pattern specific to the Ring Removable Battery series.
- Improved View & Door Clearance: Extends your doorbell forward past obstructions.
- Avoids Drilling Brick: Mounts to your existing door trim (typically 9/16" wide base).
-
Two Offset Options for Brick Extensions:
- Standard Offset: Results in approximately 5/8 inch of the doorbell body itself overhanging the trim on the door side.
- Full Offset: Shifts the doorbell entirely over the brick, making its edge flush with the mount base on the door side for maximum clearance.
- Selectable Extension Length: Order the exact depth you need.
- Durable & Weather-Resistant PETG: Built for outdoor use.
When ordering a Brick Extension, select your Ring model (e.g., "Ring Battery Doorbell Plus") and your chosen offset type & length.
Brick Extension Offset Styles for Ring Battery Doorbell Plus & Similar:
Choose the offset style that best suits your door clearance needs. Both allow you to select the required extension length.
Illustration: Standard Offset (Red on left) leaves approx. **5/8 inch of the doorbell body overhanging the trim** on the door side. Full Offset (Blue on right) shifts the doorbell fully over the brick, making its edge flush with the mount on the door side.
Standard Offset Brick Extension
Our Standard Offset positions your Ring doorbell partially over the brick, with ~5/8" of the doorbell itself overhanging the trim on the door side. Good for many general clearance needs. Base is 9/16" wide.
Select your specific Ring Removable Battery model & desired length.
Full Offset Brick Extension (Max Clearance)
Need maximum space from your door swing? The Full Offset design shifts your Ring doorbell entirely over the brick, making the doorbell edge flush with the mount base on the door side. Base is 9/16" wide.
Select your specific Ring Removable Battery model & desired length.
Customize Your Installation Further:
These optional add-ons can help perfect your Brick Extension setup for your Ring Removable Battery Doorbell:
-
Angle Shims for Base (5°, 10°, 15°)Corrects for angled trim under the Brick Extension base.
-
Angle Adapter / Swivel Top Add-onAdd horizontal angle adjustment (fixed or swivel) to the end of your brick extension.
-
Bottom Filler Spacer PlateFills the vertical gap below the extension base on angled or short trim.
-
Side Shim Filler & StabilizerFills gaps between the extension body and uneven brick, adding lateral stability.
-
Add Side Wire Entry ("Mouse Hole")Service to add side entry holes to the *Extension Base* for alternative wire routing.
-
Custom Color
Normal color is Black. Request White or other colors here.
Get the Best Installation for Your Ring Battery Doorbell Plus!
Our Brick Extensions ensure your Ring Battery Doorbell Plus (or similar removable battery model) has a clear view and is safe from door swings when mounted on recessed trim. Choose the right offset and length for your needs.
Don't forget to measure carefully and select your specific Ring model on the product page!
Questions About Your Ring Battery Doorbell Plus Extension?
Correct model identification (Removable Battery, 4-screw type) is crucial! Need help measuring, choosing an offset, or have other questions?
- Email: shop@doorbellmount.com (Send pictures!)
- Text/Call: 1-833-326-6868 (Text pictures!)
Standard Color: Brick Extensions for these Ring models ship in Black. White or other colors can be requested via our Color Change Request add-on.
Ring Doorbell Not Included: All listings are for the brick extension mount (base + custom adapter bracket for your selected Ring Removable Battery model) and assembly screws only. The Ring doorbell device must be purchased separately.
Model Compatibility: Specifically for Ring Video Doorbells with removable batteries (2, 3, 3+, 4, Battery Plus, Battery Doorbell Pro) using the 4-screw mounting pattern.
3D Printed Quality: Our mounts are produced using durable PETG 3D printing. Minor cosmetic variations or layer lines may be visible but do not affect durability or function. Your satisfaction is guaranteed.
