Custom Ring Gen 2 Corner Mount (80°, Fits 1.25" Space, 1/2" Ext)
Custom Fit: Ring Gen 2 (Integrated Battery) & Tight Corners
-
Doorbell Model: Fits **ONLY** the **Ring Video Doorbell (2nd Generation)** released in 2020 (Integrated Battery, orange button back).
(Example Image - Click for Amazon Link) - WILL NOT FIT: Any other Ring models (Removable Battery, Pro, Plus, etc.).
- Specific Installation Scenario: This custom mount is designed ONLY for installation in a corner where the flat mounting surface on **each side** of the corner is **at least 1.25 inches wide**.
- Fixed Angle & Extension: Provides a fixed **80-degree outward angle** and approx. **1/2 inch forward extension** from the corner vertex.
This is a custom solution for a very specific situation. Please measure your corner space carefully and confirm your doorbell model before ordering. Contact us with pictures if unsure!
Solution for Extremely Tight Corners & Storm Door Hinges!
Have a Ring Video Doorbell Gen 2 but face an incredibly tight corner installation, perhaps needing to clear a storm door hinge? This **Custom Fixed Corner Mount** is precision-designed for exactly that!
It requires only **1.25 inches of flat mounting space on each side of the corner** and positions your doorbell at a fixed **80-degree angle** outward, while also extending it **~1/2 inch forward** from the corner vertex. This unique combination solves clearance issues while providing an optimal view for specific challenging locations.
Custom Mount Specifications
- Fixed Horizontal Angle: 80 degrees (outward from corner vertex).
- Approx. Forward Extension: 1/2 inch (from corner vertex).
- Required Mounting Surface: Minimum **1.25 inches wide flat surface ON EACH SIDE** adjacent to the corner.
- Designed For: Ring Video Doorbell (Gen 2 - Integrated Battery).
- Material: Durable, Weather-Resistant PETG Plastic.
Key Features & Benefits:
- Custom-Engineered for Tight Corners: Fits where standard mounts won't (needs 1.25" each side).
- Specific 80° Fixed Angle: Provides a precise wide outward view from the corner.
- 1/2" Forward Extension: Helps clear obstacles like storm door hinges close to the corner.
- Perfect Fit for Ring Gen 2: Designed exclusively for the integrated battery model.
- Clean Installation: Allows wires to pass through for a neat appearance.
- Durable Outdoor Construction: Made from robust, paintable PETG material.
- Includes Hardware: Comes with small screws (#4 / PH1 likely) for attaching the Ring Gen 2 bracket to this mount.
Installing Your Custom Corner Mount
-
Tools & Prep: Gather: Drill, PH1 & appropriate Philips bit for wall screws, Level, Anchors (if needed), Ring Gen 2 & its bracket/security screw/tool.
Turn OFF power at the breaker!
- Position Mount: Carefully place the **Custom Corner Mount** snugly into the corner, ensuring the 80° angle faces outward correctly. Verify you have at least 1.25" flat space on both sides for mounting. Mark screw hole locations (likely 1 or 2 per side).
-
Secure Mount to Corner: Pre-drill pilot holes if necessary. Securely fasten the mount to **both sides** of the corner trim/wall using appropriate screws (NOT included - use screws suitable for your wall material).
Ensure mount is held firmly against both surfaces. Use level. Do not overtighten wall screws.
-
Attach Ring Gen 2 Bracket: Route wires through the mount. Secure the **plastic bracket that came WITH your Ring Doorbell** onto the angled face of the custom mount using the small screws PROVIDED WITH THIS MOUNT (likely #4 / PH1).
Do NOT use Ring's long wall screws here. Use correct PH1 driver. Tighten snugly.
- Wire & Mount Ring Gen 2: Connect wires to the Ring bracket following Ring's instructions. Clip/Secure your Ring Gen 2 Doorbell onto its bracket. Secure with Ring's security screw(s).
- Final Check & Power On: Ensure doorbell is secure. Turn power back on and test.
Follow safety rules & Ring guidelines. Use appropriate anchors/screws for your wall type. This is a custom fit item - ensure your space matches the required dimensions.
Customization Options:
This is a custom item. If you need different angles or dimensions:
-
Different Angles/Sizes?
This specific mount is 80° / 1/2" Ext / 1.25" Sides. If your needs differ, please contact us with your requirements and pictures for a custom design quote (typically $50-$100 total mount cost).
-
Custom Color
Standard color is Black. For White, Brown, Grey, etc., add this service (customer-painted example mentioned in source).
Product Visualization
(See listing photos for the specific design, or contact us for clarification!)
Questions About This Custom Mount?
This is a highly specific custom mount! Please verify your Ring Gen 2 model AND your corner dimensions (1.25" per side minimum) BEFORE ordering. Send pictures if unsure!
- Email: shop@doorbellmount.com (Send Pictures & Measurements!)
- Text/Call: 1-833-326-6868 (Text Pictures & Measurements!)
Standard Color: Black. Add the Color Change Request for other colors.
Doorbell Not Included. Includes the custom fixed-angle corner mount ONLY and screws for attaching the Ring Gen 2 bracket. Wall mounting screws are NOT included.
Custom Fit Item: Designed ONLY for Ring Gen 2 (Integrated Battery) in corners with >= 1.25" space per side, providing 80° angle & 1/2" extension.
PETG Material: Printed in durable, outdoor-rated PETG. Paintable by customer.
3D Printed Quality: Minor cosmetic variations inherent to 3D printing may exist but do not affect function.
Order this Custom 80° Corner Mount for your Ring Gen 2 if you have a tight corner needing exactly 1.25" space per side and a 1/2" extension!
