Wyze Doorbell V2 Full Offset Brick Extension Mount | Max Clearance
Compatibility: Wyze Video Doorbell V2 ONLY!
- Fits ONLY: The **Wyze Video Doorbell V2**.
- Confirm your model matches the picture below:
-
(Example Image - Click for Amazon Link. As an Amazon Associate, I earn from qualifying purchases.) - WILL NOT FIT: The Wyze Video Doorbell Pro or any other Wyze camera/doorbell model.
- Surface Width: Requires mounting surface (trim/molding) to be AT LEAST 9/16 inches wide for the base.
Please ensure you have the correct Wyze model before ordering!
Maximum Door Clearance for Your Wyze Doorbell V2!
Is your Wyze Doorbell V2 mounted on trim that's recessed behind brick? Need maximum clearance from a tight door swing or storm door? This **Full Offset Brick Extension Mount** is designed specifically for these challenging spots!
It extends your Wyze V2 forward past the brick (select the required length) and uses our unique **Full Offset** design to shift the doorbell entirely sideways over the brick face, maximizing space next to your door frame. Installs easily on narrow trim (>= 9/16" wide) without drilling into masonry.
How it Works: Full Offset (Maximum Sideways Shift)
This mount utilizes our unique FULL OFFSET geometry. Your Wyze Doorbell V2 attaches so its door-facing edge aligns flush with the side edge of the narrow 9/16" mount base. This provides the maximum possible horizontal shift over adjacent brick compared to our Standard Offset mounts.
This is the best choice when maximum clearance from a door swing or storm door is critical. The offset is reversible for left or right side mounting.
This mount positions the doorbell over or in front of the brick face.
Full Offset (This Product) vs Standard Offset:
Need standard (less) offset? Click here for the Standard Offset version for the Wyze Doorbell V2.Base Dimensions & Mounting: The extension base is 9/16 inches wide (requires >= 9/16" surface). Standard mounting hole spacing is 2.5 inches (center-to-center). Ensure solid mounting on trim. Wall-mounting screws not included.
Angled Trim? If your trim is angled, add our Angle Shims (sold separately) for a perpendicular installation.
CRITICAL: Measure & Select Your Extension Length!
Choose the correct length to clear your brickwork or storm door. Measure carefully:
- Measure the exact distance straight out from the surface where the mount base will attach (your trim) to the outermost face of your brick or obstacle.
- Order THIS measurement as your required Extension Length. (Do NOT subtract doorbell thickness for offset mounts).
Select the required extension length from the dropdown menu when ordering. (Starts at 1/4 inch).
Need help measuring? Text/email a picture! (Contact info below)
Measure like this from Trim to Brick Face for Extension Length.
Key Features & Benefits:
- Maximum Sideways Offset: Full Offset design provides ultimate door swing clearance.
- Tailored for Wyze Doorbell V2: Ensures compatibility with this specific Wyze model.
- "Over Brick" Placement: Extends doorbell forward past brick and positions it fully over the brick face.
- Avoid Drilling Brick: Mounts to existing trim (>=9/16" wide, Std. 2.5" hole spacing).
- Selectable Extension Length: Order the precise depth needed (Trim-to-Brick/Obstacle measurement).
- Narrow Base (9/16" Std): Designed for tight trim installations.
- Wire Passthrough: Internal channel accommodates Wyze V2 wiring.
- Reversible Offset: Base can be flipped for left or right offset.
- Durable PETG Construction: Strong, weather-resistant plastic.
- Add-on Compatible: Works with angle shims, fillers etc. (see below).
- Future-Proof Bracket: Top adapter bracket potentially replaceable for future upgrades (check compatibility).
How to Install Your Full Offset Extension for Wyze V2
This mount uses two main printed pieces: the Extension Base and the Doorbell Adapter Bracket.
-
Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed), your Wyze Doorbell V2 wall plate & hardware.
Turn OFF power at the breaker!
-
Mount Extension Base: Position the Extension Base (correct length/offset) on trim over wires (ensure Full Offset provides max clearance needed). Attach securely using appropriate screws (#6 size likely, use PH2) and anchors into the 2.5" spaced holes.
Ensure base is level. Don't overtighten.
-
Attach Doorbell Adapter Bracket: Route wires through the Doorbell Adapter Bracket (top piece for Wyze V2). Align onto Extension Base. Attach using the four small center screws provided (likely #4 screws / PH1 driver).
Use correct PH1 bit. Tighten until flush. Check for/clear debris if needed. Do NOT over-torque.
-
Attach Wyze Wall Plate: Secure the **wall plate that came WITH your Wyze Doorbell V2** onto the Doorbell Adapter Bracket using the small screws PROVIDED WITH THIS MOUNT (typically #4 / PH1). Ensure correct orientation.
Do NOT use Wyze's long wall screws here. Use correct PH1 driver.
- Wire & Mount Wyze V2 Doorbell: Connect wires to the Wyze wall plate following Wyze instructions. Click the Wyze Doorbell V2 unit firmly onto its wall plate until secure.
- Final Check & Power On: Ensure doorbell is secure. Turn power back on and test.
Follow safety rules & Wyze guidelines. Use correct anchors/screws. Correct screwdriver size prevents stripping.
Enhance Your Wyze Doorbell Installation
Perfect Fit for Brick Surfaces
The Wyze Doorbell Brick Extension is designed specifically for homes with brick surfaces near trim. This extension features a 9/16 inch narrow base and a full offset design, allowing you to mount your Wyze Doorbell V2 securely even with tight clearances, ensuring it functions properly and looks integrated.
Simple Installation Process
Installing the Wyze Doorbell Brick Extension is straightforward onto existing trim. Easy-to-follow instructions enable quick setup without needing professional help, enhancing your security system efficiently.
A Durable Choice for Outdoor Use
Built from robust PETG plastic, the Wyze Doorbell Brick Extension withstands outdoor conditions, protecting your doorbell from weather elements and ensuring long-lasting, reliable performance.
Optional Add-ons & Accessories:
Further customize your installation:
-
Angle Shims (5°, 10°, 15°)Corrects for angled trim *under the Extension Base*.
-
Horizontal Angle Adapter or Swivel Add-onAdd horizontal angle adjustment to the end of the extension.
-
Bottom Filler Spacer PlateFills the gap below the extension base on angled/uneven trim.
-
Body Shim Filler PlateFills gaps between the extension body and uneven brick.
-
Add Side Wire EntryAdds side entry holes ("mouse holes") to the *Extension Base* (add service to cart).
-
Wire Extension Kit
Need longer wires? Purchase our extension wire kit with your choice of connectors.
Standard color is Black (Default White for Wyze). Use this listing for other colors.
Product Examples
(See listing photos for details or contact us for more examples!)
Need Help? Confirm Compatibility & Measurements!
Ensure you have the Wyze Doorbell V2 (Not Pro). Need help measuring extension length or choosing Full vs Standard Offset?
- Email: shop@doorbellmount.com (Send Pictures!)
- Text/Call: 1-833-326-6868 (Text Pictures!)
Standard Color: White (to match Wyze). For Black or other colors, add the Color Change Request item.
Doorbell Not Included. Includes the 2-piece extension mount (Extension Base + Doorbell Adapter Bracket) and necessary assembly screws.
PETG Material: Printed in durable, outdoor-rated PETG.
3D Printed Quality: Minor cosmetic variations inherent to 3D printing may exist but do not affect function. Contact us with quality concerns before reviewing.
Order the Full Offset Brick Extension for maximum clearance with your Wyze Doorbell V2! Remember to measure carefully (Trim to Brick Face!) and select your required extension length.
