Ring Battery Doorbell Plus Full Offset Brick Extension Mount | Max Clearance
Compatibility: Ring Battery Doorbell Plus & Similar REMOVABLE Battery Models!
- Primary Fit: Ring Battery Doorbell Plus (Newest removable battery model).
- Also Fits: Other Ring models using the same body style with a REMOVABLE battery (Ring 2, Ring 3, Ring 3 Plus, Ring 4).
- Confirm your model uses a removable battery & this mounting pattern:
-
- WILL NOT FIT: Ring Wired Doorbell **Pro** (uses different body), models with Integrated Batteries (Gen 1, Gen 2 2020), or ANY Pro/Wired models.
- Surface Width: Requires mounting surface (trim/molding) to be AT LEAST 9/16 inches wide for the base.
Unsure? Send us a photo! Check our Ring Model Guide or contact us!
Maximum Door Clearance for Your Ring Battery Doorbell Plus!
Installing your Ring Battery Doorbell Plus (or similar removable battery model like Ring 2/3/4) on trim recessed behind brick? Need maximum clearance for a tight door swing or storm door? This **Full Offset Brick Extension Mount** is the perfect solution!
It extends your doorbell forward past the brick (select required length) and uses our **Full Offset** design to shift the doorbell body entirely sideways over the brick face, maximizing space next to your door frame. Installs on narrow trim (>= 9/16" wide) without drilling into brick.
How it Works: Full Offset (Maximum Sideways Shift)
This mount utilizes our unique FULL OFFSET geometry. Your Ring Doorbell attaches so its door-facing edge aligns flush with the side edge of the narrow 9/16" mount base. This provides the maximum possible horizontal shift over adjacent brick compared to our Standard Offset mounts.
This is the best option when door swing or storm door clearance is critical.
This mount positions the doorbell over or in front of the brick face.
Full Offset (This Product) vs Standard Offset:
Need standard (less) offset? Click here for the Standard Offset version for these models.
Base Dimensions & Mounting: The extension base is 9/16 inches wide (requires >= 9/16" surface). Standard mounting hole spacing is 2.5 inches (center-to-center). Ensure solid mounting on trim. Wall-mounting screws not included.
Angled Trim? If your trim is angled, add our Angle Shims (sold separately) for a perpendicular installation.
CRITICAL: Measure & Select Your Extension Length!
Choose the correct length to clear your brickwork or storm door. Measure carefully:
- Measure the exact distance straight out from the surface where the mount base will attach (your trim) to the outermost face of your brick or obstacle.
- Order THIS measurement as your required Extension Length. (Do NOT subtract doorbell thickness for offset mounts).
Select the required extension length from the dropdown menu when ordering. (Starts at 1/4 inch).
Need help measuring? Text/email a picture! (Contact info below)
Measure like this from Trim to Brick Face for Extension Length.
Key Features & Benefits:
- Maximum Sideways Offset: Full Offset design for ultimate door swing clearance.
- Fits Ring Battery Doorbell Plus (and compatible 2/3/3+/4 models).
- "Over Brick" Placement: Extends doorbell forward past brick and positions it fully over the brick face.
- Avoid Drilling Brick: Mounts to existing trim (>=9/16" wide, Std. 2.5" hole spacing).
- Selectable Extension Length: Order the precise depth needed (Trim-to-Brick/Obstacle measurement).
- Narrow Base (9/16" Std): Designed for tight trim installations.
- Wire Passthrough: Internal channel accommodates optional hardwiring.
- Durable PETG Construction: Strong, weather-resistant plastic.
- Add-on Compatible: Works with angle shims, fillers etc. (see below).
- Future-Proof Bracket: Top adapter bracket is replaceable for future upgrades (available here).
How to Install Your Full Offset Extension
This mount uses two main printed pieces: the Extension Base (with Full Offset) and the Doorbell Adapter Bracket.
-
Tools & Prep: Gather: Drill, PH1 & PH2 Philips Screwdrivers/Bits, Level, Anchors (if needed), Ring security screwdriver (often orange, from doorbell box).
Turn OFF power at the breaker if hardwiring! Ensure battery is charged but removed during install.
-
Mount Extension Base: Position the Extension Base (correct length/offset) on trim over wires (ensure Full Offset provides max clearance needed). Attach securely using appropriate screws (#6 size likely, use PH2) and anchors into the 2.5" spaced holes.
Ensure base is level. Don't overtighten.
-
Attach Doorbell Adapter Bracket: Route wires through the Doorbell Adapter Bracket. Align onto Extension Base. Attach using the four small center screws provided (likely #4 screws / PH1 driver).
Use correct PH1 bit. Tighten until flush. Check for/clear debris if needed. Do NOT over-torque.
- Wire Doorbell (If Hardwiring): Connect wires to your Ring Doorbell following Ring's instructions. Tuck excess wire.
-
Attach Ring Doorbell:
- Take the main body of your Ring Doorbell (with battery removed, faceplate off).
- Align the mounting holes on the back of the doorbell body with the holes on the Doorbell Adapter Bracket.
- Secure the **doorbell body** to the Adapter Bracket using the small screws PROVIDED WITH THIS MOUNT (typically #4 / PH1 driver). Do NOT use Ring's longer wall screws here.
- Re-install the battery (if not hardwired) and snap the Ring faceplate back on. Secure with Ring's security screw(s) at the bottom using the Ring screwdriver.
Use correct drivers/tools for each screw type. Tighten gently. - Final Check & Power On: Ensure doorbell is secure. Turn power back on (if applicable) and test.
Follow safety rules & Ring's guidelines. Use correct anchors/screws for wall type. Correct screwdriver size prevents stripping.
Enhance Your Entryway with the Ring Battery Doorbell Plus Brick Extension
Optimal Placement for Your Doorbell Plus
This Full Offset Brick Extension Mount is designed specifically to enhance the placement of your Ring Battery Doorbell Plus (and similar models). The full offset maximizes clearance from door swings and positions the doorbell optimally over the brick face for improved visibility and functionality.
Durability and Reliability
Crafted from durable, weather-resistant PETG, this extension mount withstands different conditions while ensuring your Doorbell Plus remains secure. It allows your doorbell to remain accessible and visible, giving your entryway a smart boost.
Easy Installation Process
Installing the extension onto existing trim is straightforward, avoiding masonry drilling. Our instructions guide you through attaching the base, adapter bracket, and your doorbell for a secure setup.
Optional Add-ons & Accessories:
Further customize your installation:
-
Angle Shims (5°, 10°, 15°)Corrects for angled trim *under the Extension Base*.
-
Horizontal Angle Adapter or Swivel Add-onAdd horizontal angle adjustment to the end of the extension.
-
Bottom Filler Spacer PlateFills the gap below the extension base on angled/uneven trim.
-
Body Shim Filler PlateFills gaps between the extension body and uneven brick.
-
Add Side Wire EntryAdds side entry holes ("mouse holes") to the *Extension Base* (add service to cart).
Product Examples
(See listing photos for details or contact us for more examples!)
Need Help? Confirm Compatibility & Measurements!
Ensure you have a compatible Ring Removable Battery model (Plus, 2, 3, 3+, 4). Need help measuring extension length or choosing Full vs Standard Offset?
- Email: shop@doorbellmount.com (Send Pictures!)
- Text/Call: 1-833-326-6868 (Text Pictures!)
Standard Color: Black. For other colors, add the Color Change Request item.
Doorbell Not Included. Includes the 2-piece extension mount (Extension Base + Doorbell Adapter Bracket) and necessary assembly screws.
PETG Material: Printed in durable, outdoor-rated PETG.
3D Printed Quality: Minor cosmetic variations inherent to 3D printing may exist but do not affect function. Contact us with quality concerns before reviewing.
Order the Full Offset Brick Extension for maximum clearance with your Ring Battery Doorbell Plus (or 2/3/4)! Remember to measure carefully (Trim to Brick Face!) and select your required extension length.
