Nest Hello / Nest Wired (1st Gen) Full Offset Brick Extension Mount | Max Clearance

$50.00
Nest Hello / Nest Wired (1st Gen) Full Offset Brick Extension Mount | Max Clearance Compatibility: Nest Doorbell (Wired, 1st Gen) / Nest Hello ONLY! Fits ONLY: The original wired **Google Nest Doorbell (1st Gen)**, also known as the **Nest...
Availability: Many In Stock
Product Type: Brick Mount

Nest Hello / Nest Wired (1st Gen) Full Offset Brick Extension Mount | Max Clearance

Compatibility: Nest Doorbell (Wired, 1st Gen) / Nest Hello ONLY!

  • Fits ONLY: The original wired **Google Nest Doorbell (1st Gen)**, also known as the **Nest Hello**.
  • Confirm your model matches the picture below:
  • Nest Hello / Google Nest Doorbell (Wired, 1st Gen)
    (Example Image - Click for Amazon Link. As an Amazon Associate, I earn from qualifying purchases.)
  • WILL NOT FIT: The newer Google Nest Doorbell (Battery) or the Google Nest Doorbell (Wired, 2nd Gen).
  • Surface Width: Requires mounting surface (trim/molding) to be AT LEAST 9/16 inches wide for the base.

Unsure which Nest model you have? Please send us a picture before ordering!

Maximum Door Clearance for Your Nest Hello!

Installing your Nest Hello (Wired 1st Gen) on trim set back from brick or stone? Is your door or storm door swing extremely close, leaving no room? This **Full Offset Brick Extension Mount** provides the maximum possible sideways clearance!

It extends your Nest Hello forward past the brick (select the exact length needed) and utilizes our **Full Offset** design to shift the doorbell entirely sideways over the brick face, creating essential space next to your door frame. Installs on narrow trim (>= 9/16" wide) without drilling into your masonry.

How it Works: Full Offset (Maximum Sideways Shift)

This mount features our unique FULL OFFSET geometry. The Nest Hello attaches so its door-facing edge aligns flush with the side edge of the narrow 9/16" mount base. This maximizes the horizontal shift over adjacent brick compared to our Standard Offset options.

Ideal when every bit of clearance from a door swing or storm door is critical.

This mount positions the doorbell over or in front of the brick face.

Full Offset (This Product) vs Standard Offset:

Need standard (less) offset? Click here for the Standard Offset version for the Nest Hello.

Base Dimensions & Mounting: The extension base is 9/16 inches wide (requires >= 9/16" surface). Standard mounting hole spacing is 2.5 inches (center-to-center). Ensure solid mounting on trim. Wall-mounting screws not included.

Angled Trim? If your trim is angled, add our Angle Shims (sold separately) for a perpendicular installation.

CRITICAL: Measure & Select Your Extension Length!

Choose the correct length to clear your brickwork or storm door. Measure carefully:

  • Measure the exact distance straight out from the surface where the mount base will attach (your trim) to the outermost face of your brick or obstacle.
  • Order THIS measurement as your required Extension Length. (Do NOT subtract doorbell thickness for offset mounts).

Select the required extension length from the dropdown menu when ordering. (Starts at 1/4 inch).

Need help measuring? Text/email a picture! (Contact info below)

Key Features & Benefits:

  • Maximum Sideways Offset: Full Offset design provides ultimate door swing clearance.
  • Designed for Nest Hello: Perfect fit for Google Nest Doorbell (Wired, 1st Gen).
  • "Over Brick" Placement: Extends doorbell forward past brick and positions it fully over the brick face.
  • Avoid Drilling Brick: Mounts to existing trim (>=9/16" wide, Std. 2.5" hole spacing).
  • Selectable Extension Length: Order the precise depth needed (Trim-to-Brick/Obstacle measurement).
  • Narrow Base (9/16" Std): Designed for tight trim installations.
  • Wire Passthrough: Internal channel accommodates Nest Hello wiring.
  • Durable PETG Construction: Strong, weather-resistant plastic.
  • Add-on Compatible: Works with angle shims, fillers etc. (see below).
  • Future-Proof Bracket: Top adapter bracket potentially replaceable for future upgrades (check compatibility).

How to Install Your Full Offset Extension for Nest Hello

This mount uses two main printed pieces: the Extension Base and the Doorbell Adapter Bracket.

  1. Tools & Prep: Gather: Drill, PH1 & PH2 Philips Screwdrivers/Bits, Level, Anchors (if needed), Nest Hello wall plate & release tool.
    Turn OFF power to doorbell wiring at the breaker!
  2. Mount Extension Base: Position the Extension Base (correct length/offset) on trim over wires (ensure Full Offset provides max clearance needed). Attach securely using appropriate screws (#6 size likely, use PH2) and anchors into the 2.5" spaced holes.
    Ensure base is level. Don't overtighten.
  3. Attach Doorbell Adapter Bracket: Route wires through the Doorbell Adapter Bracket (top piece for Nest Hello). Align onto Extension Base. Attach using the four small center screws provided (likely #4 screws / PH1 driver).
    Use correct PH1 bit. Tighten until flush. Check for/clear debris if needed. Do NOT over-torque.
  4. Attach Nest Wall Plate: Secure the **metal wall plate that came WITH your Nest Hello** onto the Doorbell Adapter Bracket using the small screws PROVIDED WITH THIS MOUNT (typically #4 / PH1). Ensure it's oriented correctly.
    Do NOT use Nest's long wall screws here. Use correct PH1 driver.
  5. Wire & Mount Nest Hello: Connect wires to the Nest Hello wall plate following Google Nest instructions. Carefully clip the Nest Hello doorbell onto its wall plate until it clicks securely.
  6. Final Check & Power On: Ensure doorbell is secure. Turn power back on and test. (Use Nest release tool if removal is needed).

Follow safety rules & Google Nest guidelines. Use correct anchors/screws. Correct screwdriver size prevents stripping.

Optional Add-ons & Accessories:

Further customize your installation:

Product Examples

(See listing photos for details or contact us for more examples!)

Need Help? Confirm Compatibility & Measurements!

Ensure you have the Nest Hello (Wired, 1st Gen). Need help measuring extension length or choosing Full vs Standard Offset?

Standard Color: Black. For other colors, add the Color Change Request item.

Doorbell Not Included. Includes the 2-piece extension mount (Extension Base + Doorbell Adapter Bracket) and necessary assembly screws.

PETG Material: Printed in durable, outdoor-rated PETG.

3D Printed Quality: Minor cosmetic variations inherent to 3D printing may exist but do not affect function. Contact us with quality concerns before reviewing.

Order the Full Offset Brick Extension for maximum clearance with your Nest Hello / Nest Wired (1st Gen)! Remember to measure carefully (Trim to Brick Face!) and select your required extension length.