Eufy Doorbell (Single Cam) Full Offset Brick Extension Mount | Max Clearance
Compatibility: Eufy Single Camera Doorbells ONLY!
- Fits ONLY: Eufy Video Doorbells with a **single camera lens** (compatible with both Wired & Wireless versions sharing the same body style).
- Confirm your model matches the picture below:
-
(Example Image - Click for Amazon Link. As an Amazon Associate, I earn from qualifying purchases.) - WILL NOT FIT: Eufy **Dual Camera** doorbells or doorbells from other brands (Ring, Nest, etc.).
- Surface Width: Requires mounting surface (trim/molding) to be AT LEAST 9/16 inches wide for the base.
Please verify your Eufy model before ordering! Send us a picture if unsure.
Maximum Door Clearance for Your Eufy Single Camera Doorbell!
Is your Eufy Single Camera Doorbell mounted on trim recessed behind brick? Need maximum space to avoid your door or storm door hitting it? This **Full Offset Brick Extension Mount** provides the ultimate sideways clearance!
It extends your Eufy doorbell forward past the brick (select the required length) and uses our unique **Full Offset** design to shift the doorbell entirely sideways over the brick face. Installs easily on narrow trim (>= 9/16" wide) without drilling into masonry.
How it Works: Full Offset (Maximum Sideways Shift)
This mount utilizes our unique FULL OFFSET geometry. Your Eufy Doorbell attaches so its door-facing edge aligns flush with the side edge of the narrow 9/16" mount base. This maximizes the horizontal shift over adjacent brick compared to our Standard Offset mounts.
Ideal when door swing or storm door clearance is the top priority. The offset is reversible for left or right side mounting.
This mount positions the doorbell over or in front of the brick face.
Full Offset (This Product) vs Standard Offset:
Need standard (less) offset? Click here for the Standard Offset version for Eufy Single Camera Doorbells.Base Dimensions & Mounting: The extension base is 9/16 inches wide (requires >= 9/16" surface). Standard mounting hole spacing is 2.5 inches (center-to-center). Ensure solid mounting on trim. Wall-mounting screws not included.
Angled Trim? If your trim is angled, add our Angle Shims (sold separately) for a perpendicular installation.
CRITICAL: Measure & Select Your Extension Length!
Choose the correct length to clear your brickwork or storm door. Measure carefully:
- Measure the exact distance straight out from the surface where the mount base will attach (your trim) to the outermost face of your brick or obstacle.
- Order THIS measurement as your required Extension Length. (Do NOT subtract doorbell thickness for offset mounts).
Select the required extension length from the dropdown menu when ordering. (Starts at 1/4 inch).
Need help measuring? Text/email a picture! (Contact info below)
Measure like this from Trim to Brick Face for Extension Length.
Key Features & Benefits:
- Maximum Sideways Offset: Full Offset design provides ultimate door swing clearance.
- Designed for Eufy Single Camera Doorbells: Fits common Wired & Wireless models.
- "Over Brick" Placement: Extends doorbell forward past brick and positions it fully over the brick face.
- Avoid Drilling Brick: Mounts to existing trim (>=9/16" wide, Std. 2.5" hole spacing).
- Selectable Extension Length: Order the precise depth needed (Trim-to-Brick/Obstacle measurement).
- Narrow Base (9/16" Std): Designed for tight trim installations.
- Wire Passthrough: Internal channel accommodates optional wiring.
- Reversible Offset: Base can be flipped for left or right offset.
- Durable PETG Construction: Strong, weather-resistant plastic.
- Add-on Compatible: Works with angle shims, fillers etc. (see below).
- Future-Proof Bracket: Top adapter bracket potentially replaceable for future upgrades (check compatibility).
How to Install Your Full Offset Extension for Eufy Doorbell
This mount uses two main printed pieces: the Extension Base and the Doorbell Adapter Bracket.
-
Tools & Prep: Gather: Drill, PH1 & PH2 Philips Screwdrivers/Bits, Level, Anchors (if needed), your Eufy doorbell backplate & hardware.
Turn OFF power at the breaker if hardwiring! Ensure doorbell is charged if battery version.
-
Mount Extension Base: Position the Extension Base (correct length/offset) on trim over wires (ensure Full Offset provides max clearance needed). Attach securely using appropriate screws (#6 size likely, use PH2) and anchors into the 2.5" spaced holes.
Ensure base is level. Don't overtighten.
-
Attach Doorbell Adapter Bracket: Route wires through the Doorbell Adapter Bracket (top piece for Eufy). Align onto Extension Base. Attach using the four small center screws provided (likely #4 screws / PH1 driver).
Use correct PH1 bit. Tighten until flush. Check for/clear debris if needed. Do NOT over-torque.
-
Attach Eufy Backplate: Secure the **backplate that came WITH your Eufy Doorbell** onto the Doorbell Adapter Bracket using the small screws PROVIDED WITH THIS MOUNT (typically #4 / PH1). Ensure it's oriented correctly.
Do NOT use Eufy's long wall screws here. Use correct PH1 driver.
- Wire & Mount Eufy Doorbell: Connect wires (if applicable) to the Eufy backplate following Eufy's instructions. Click the Eufy Doorbell unit firmly onto its backplate until secure.
- Final Check & Power On: Ensure doorbell is secure. Turn power back on (if applicable) and test.
Follow safety rules & Eufy guidelines. Use correct anchors/screws. Correct screwdriver size prevents stripping.
Optimize Your Doorbell Placement
Perfect Fit for Your Eufy Doorbell
This Full Offset Brick Extension is specifically designed for Eufy Single Camera doorbells, ensuring a secure fit and seamless integration. The full offset is ideal for positioning your doorbell for optimal visibility and performance, especially when dealing with obstructions or tight clearances.
Easy Installation and Reliable Performance
Installing this mount onto existing trim is straightforward, avoiding complex masonry work. Securely attach the base, select your length, mount the Eufy backplate, and click on your doorbell for a hassle-free setup.
Durable Construction for Lasting Use
Built from high-quality, weather-resistant PETG, this extension provides outstanding durability. It ensures your Eufy doorbell remains securely mounted and fully operational year-round, contributing to your home's security.
Optional Add-ons & Accessories:
Further customize your installation:
-
Angle Shims (5°, 10°, 15°)Corrects for angled trim *under the Extension Base*.
-
Horizontal Angle Adapter or Swivel Add-onAdd horizontal angle adjustment to the end of the extension.
-
Bottom Filler Spacer PlateFills the gap below the extension base on angled/uneven trim.
-
Body Shim Filler PlateFills gaps between the extension body and uneven brick.
-
Add Side Wire EntryAdds side entry holes ("mouse holes") to the *Extension Base* (add service to cart).
-
Wire Extension Kit
Need longer wires? Purchase our extension wire kit with your choice of connectors.
Product Examples
(See listing photos for details or contact us for more examples!)
Need Help? Confirm Compatibility & Measurements!
Ensure you have a compatible Eufy Single Camera Doorbell (Wired or Wireless). Need help measuring extension length or choosing Full vs Standard Offset?
- Email: shop@doorbellmount.com (Send Pictures!)
- Text/Call: 1-833-326-6868 (Text Pictures!)
Standard Color: Black. For other colors, add the Color Change Request item.
Doorbell Not Included. Includes the 2-piece extension mount (Extension Base + Doorbell Adapter Bracket) and necessary assembly screws.
PETG Material: Printed in durable, outdoor-rated PETG.
3D Printed Quality: Minor cosmetic variations inherent to 3D printing may exist but do not affect function. Contact us with quality concerns before reviewing.
Order the Full Offset Brick Extension for maximum clearance with your Eufy Single Camera Doorbell! Remember to measure carefully (Trim to Brick Face!) and select your required extension length.
