Narrow Doorbell Brick Extension Mount | Blink Doorbell | 9/16in Wide - Full Offset to clear the door
Blink Doorbell Full Offset Brick Extension Mount | Max Door Clearance
Compatibility: Blink Video Doorbell ONLY!
- Fits ONLY: The standard **Blink Video Doorbell** (Wireless or Wired).
- WILL NOT FIT: Blink Mini, Outdoor/Indoor cameras, or doorbells from other brands (Ring, Nest, etc.).
- Surface Width: Requires mounting surface (trim/molding) to be AT LEAST 9/16 inches wide for the base.
Please ensure you have the correct Blink Video Doorbell before ordering. If unsure, send us a picture!
Maximum Clearance for Your Blink Doorbell near Brick!
Is your Blink Video Doorbell mounted on trim recessed behind brick, and too close to your door swing or storm door? This **Full Offset Brick Extension Mount** provides the maximum possible sideways clearance!
It extends your Blink doorbell forward past the brick (select the length needed) using our **Full Offset** design, shifting the doorbell entirely sideways over the brick face. Installs easily on trim >= 9/16" wide without drilling into your masonry.
How it Works: Full Offset (Maximum Sideways Shift)
This mount utilizes our unique FULL OFFSET geometry. The Blink Doorbell attaches so its door-facing edge aligns flush with the side edge of the narrow 9/16" mount base. This maximizes the horizontal shift over adjacent brick compared to Standard Offset mounts.
Ideal when door swing or storm door clearance is critical.
This mount positions the doorbell over or in front of the brick face.
Full Offset (This Product) vs Standard Offset:
Need standard (less) offset? Click here for the Standard Offset version for the Blink Doorbell.Base Dimensions & Mounting: The extension base is 9/16 inches wide (requires >= 9/16" surface). Standard mounting hole spacing is 2.5 inches (center-to-center). Ensure solid mounting on trim. Wall-mounting screws not included.
Angled Trim? If your trim is angled, add our Angle Shims (sold separately) for a perpendicular installation.
CRITICAL: Measure & Select Your Extension Length!
Choose the correct length to clear your brickwork or storm door. Measure carefully:
- Measure the exact distance straight out from the surface where the mount base will attach (your trim) to the outermost face of your brick or obstacle.
- Order THIS measurement as your required Extension Length. (Do NOT subtract doorbell thickness for offset mounts).
Select the required extension length from the dropdown menu when ordering. (Starts at 1/4 inch).
Need help measuring? Text/email a picture! (Contact info below)
Key Features & Benefits:
- Maximum Sideways Offset: Full Offset design for ultimate door swing clearance.
- Designed for Blink Video Doorbell: Ensures compatibility with the standard Blink Video Doorbell.
- "Over Brick" Placement: Extends doorbell forward past brick and positions it fully over the brick face.
- Avoid Drilling Brick: Mounts to existing trim (>=9/16" wide, Std. 2.5" hole spacing).
- Selectable Extension Length: Order the precise depth needed (Trim-to-Brick/Obstacle measurement).
- Narrow Base (9/16" Std): Designed for tight trim installations.
- Wire Passthrough: Internal channel included (though Blink is typically wireless).
- Durable PETG Construction: Strong, weather-resistant plastic.
- Add-on Compatible: Works with angle shims, fillers etc. (see below).
- Future-Proof Bracket: Top adapter bracket potentially replaceable for future upgrades (check compatibility).
How to Install Your Full Offset Extension for Blink
This mount uses two main printed pieces: the Extension Base and the Doorbell Adapter Bracket.
-
Tools & Prep: Gather: Drill, PH1 & PH2 Philips Screwdrivers/Bits, Level, Anchors (if needed), your Blink Doorbell backplate/tool.
Ensure Blink Doorbell batteries are installed correctly per Blink instructions.
-
Mount Extension Base: Position the Extension Base (correct length/offset) on trim (ensure offset provides max clearance). Attach securely using appropriate screws (#6 size likely, use PH2) and anchors into the 2.5" spaced holes.
Ensure base is level. Drill pilot holes. Don't overtighten.
-
Attach Doorbell Adapter Bracket: Align the Doorbell Adapter Bracket (top piece for Blink) onto Extension Base. Attach using the four small center screws provided (likely #4 screws / PH1 driver).
Use correct PH1 bit. Tighten until flush. Check for/clear debris if needed. Do NOT over-torque.
-
Attach Blink Backplate: Secure the **backplate that came WITH your Blink Doorbell** onto the Doorbell Adapter Bracket using the small screws PROVIDED WITH THIS MOUNT (typically #4 / PH1).
Use correct driver. Do NOT use Blink's wall screws here.
- Mount Blink Doorbell: Clip your Blink Video Doorbell securely onto **its own backplate** that you just attached to the mount.
- Final Check: Ensure doorbell is securely mounted and assembly is firm.
Follow safety rules & Blink guidelines. Use correct anchors/screws for your wall type. Correct screwdriver size prevents stripping.
Optimal Positioning for Enhanced Security
The Blink Doorbell Full Offset mount allows you to install your doorbell in a location that maximizes its capabilities, especially when dealing with recessed trim and tight door clearances. This full offset positions your doorbell at the best angle over the brick face for capturing clear video footage.
Easy Installation on Trim
Installing your Blink doorbell with this mount onto existing trim is straightforward, avoiding complex brick drilling. Detailed instructions and included hardware simplify the DIY process.
Durable Construction for Long-lasting Use
Crafted from high-quality PETG, the Blink doorbell mount is built to withstand outdoor conditions, ensuring your doorbell remains securely mounted and functional year-round.
Optional Add-ons & Accessories:
Further customize your installation:
-
Angle Shims (5°, 10°, 15°)Corrects for angled trim *under the Extension Base*.
-
Horizontal Angle Adapter or Swivel Add-onAdd horizontal angle adjustment to the end of the extension.
-
Bottom Filler Spacer PlateFills the gap below the extension base on angled/uneven trim.
-
Body Shim Filler PlateFills gaps between the extension body and uneven brick.
-
Add Side Wire EntryAdds side entry holes ("mouse holes") to the *Extension Base* (add service to cart).
Product Examples
(See listing photos for details or contact us for more examples!)
Need Help? Confirm Compatibility & Measurements!
Ensure you have the standard Blink Video Doorbell. Need help measuring extension length or choosing Full vs Standard Offset?
- Email: shop@doorbellmount.com (Send Pictures!)
- Text/Call: 1-833-326-6868 (Text Pictures!)
Standard Color: Black. For other colors, add the Color Change Request item.
Doorbell Not Included. Includes the 2-piece extension mount (Extension Base + Doorbell Adapter Bracket) and necessary assembly screws.
PETG Material: Printed in durable, outdoor-rated PETG.
3D Printed Quality: Minor cosmetic variations inherent to 3D printing may exist but do not affect function. Contact us with quality concerns before reviewing.
Order the Full Offset Brick Extension for maximum clearance with your Blink Video Doorbell! Remember to measure carefully (Trim to Brick Face!) and select your required extension length.
