Xfinity Home Video Doorbell (SCHB1AEW) 15-90° Side-Wall Mount | Aim the 155° Camera at the Doorstep

$50.00
$40.00
15-90° Adjustable Angle Mount — Xfinity Home Video Doorbell (SCHB1AEW) Custom-Fit for the Xfinity Home Video Doorbell (SCHB1AEW) Custom-shaped for the Xfinity Home Video Doorbell (SCHB1AEW) — the Xfinity Home Video Doorbell (model SCHB1AEW) provided with Comcast Xfinity Home service....
Availability: Many In Stock
Product Type: Adjustable Mount 15-90°

15-90° Adjustable Angle Mount — Xfinity Home Video Doorbell (SCHB1AEW)

Custom-Fit for the Xfinity Home Video Doorbell (SCHB1AEW)

  • Custom-shaped for the Xfinity Home Video Doorbell (SCHB1AEW) — the Xfinity Home Video Doorbell (model SCHB1AEW) provided with Comcast Xfinity Home service.
  • Not a universal one-size mount: other doorbell brands use different body shapes and each has its own listing on our store.
  • Switching doorbells later? The base stays on the wall — grab a ~$10 Replacement Bracket for the new model.

Recover the View on a Side-Wall Install

The Xfinity doorbell's 155° view is built for the porch. On a side wall, the stock mount aims it at the siding instead of the doorstep.

This adjustable 15-90° set-screw pivot mount swings the Xfinity Home Video Doorbell (SCHB1AEW) outward across a wide 15° to 90° arc so the 1080p 155° view lands on your visitor and the doorstep instead of the wall. Set screws lock the angle so it will not drift after the first windstorm or cold snap.

Two-Axis Aim Across a Wide 15-90° Arc

Built for real angle correction, the set-screw pivot lets you aim across a 15° to 90° arc relative to the wall — it shines above 45°. Adjust left/right and up/down, then tighten the set screws to lock it.

15-90 degree side-wall swivel adjustability diagram for Xfinity Video Doorbell (2022)
15° to 90° of dual-axis aim for perpendicular-wall installs.

Only need a small nudge (<15°) or a straight-ahead view? See our 0-35° Swivel Mount for the Xfinity Home Video Doorbell (SCHB1AEW) instead.

Clean, Concealed Wiring

If the doorbell is hardwired (16-24V AC), the wires come out of the wall, pass through the concealed channel in the swivel, run through the front Xfinity Home Video Doorbell (SCHB1AEW) bracket, and land on the doorbell terminals — nothing exposed at the joint.

Concealed wire routing for the 15-90 degree swivel mount and Xfinity Video Doorbell (2022)

Dimensions at a Glance

  • Base Width: 1.8 in
  • Base Height: 3.1 in
  • Base Hole Spacing: 2-5/8 in (center-to-center)
  • Reach at 15°: ~2.0 in
  • Reach at 90°: ~3.5 in
  • Weight: ~2 oz (mount only)
  • Standard 1.8" base; a narrow 3/4" baseplate is available — see Customization.

Features That Matter

  • Custom Bracket for the Xfinity Home Video Doorbell (SCHB1AEW): A pre-shaped pocket cradles the body without blocking the lens, mic, or field of view.
  • Locking Set Screws: Set the angle once and it stays put — no drift in cold weather or after a firmware update.
  • Siding Compatible: Sits flat on flat surfaces or lapped siding up to 1.8 inches wide.
  • Complete Kit: Adjustable base, custom Xfinity Home Video Doorbell (SCHB1AEW) bracket, and all the mounting screws you need.
  • UV-Stable PETG: Freeze-tolerant, weatherproof 3D-printed PETG made for year-round outdoor use.
  • Reusable Base: Switch doorbell brands later and just order a ~$10 Replacement Bracket — the base stays on the wall.
  • Made in the USA: Printed and shipped from our own shop, not mass-produced overseas.

Customize It

Installing It on the Xfinity Home Video Doorbell (SCHB1AEW)

  1. Power first. Kill power to the doorbell circuit at the breaker before you touch the wires.
    If hardwiring, confirm power is off with a multimeter before stripping wires.
  2. Grab your tools. Drill, PH2 (#6 wall screws), PH1 (#4 bracket/set/doorbell screws), a level, and anchors if you're not hitting a stud.
  3. Pick the angle before drilling. Stand where a visitor stands, picture the line from the doorbell to that spot, and rough in that angle so you don't re-drill.
  4. Mount the base. Line it up with your siding or trim and drive the #6 screws (PH2).
    Pilot-drill if needed and don't overtighten.
  5. Add the swivel. Feed the wires through the center (skip if battery) and fasten the swivel to the base with the four #4 / PH1 screws.
  6. Rough-set the aim. Turn it toward the walkway inside the 15-90° range and snug one or two set screws for now.
  7. Attach the Xfinity Home Video Doorbell (SCHB1AEW). Snap it on with the screws included with this mount (PH1). Do not reuse the stock back plate — our bracket replaces it.
  8. Confirm in the Xfinity Home app, then lock. Power up, open Live View, check the framing, and tighten all set screws hand-tight.
    Snug is enough — don't crank the set screws.
  9. Redraw detection zones. In the Xfinity Home app, tighten the motion zones to the new framing so you exclude the street and the neighbor's yard.

FAQ

Is this really shaped for the Xfinity Home Video Doorbell (SCHB1AEW)?
Yes — this bracket is cut to the Xfinity Home Video Doorbell (SCHB1AEW) body, so the doorbell drops into a model-specific pocket with the lens and mic clear. It does not fit other brands; each has its own listing.
Can I use this on vinyl siding, Hardie board, or stucco?
Yes. The 1.8" base sits flat on most lapped siding. For vinyl siding without drilling the siding itself, add our Vinyl Siding Adapter; for fiber-cement, use our Hardie Siding Mount; for stucco, drill pilot holes and use masonry anchors.
What hardware is included?
You get the adjustable swivel base, the custom adapter bracket, locking set screws, mounting screws (#6 PH2 for the wall and #4 PH1 for the bracket and doorbell), and wall anchors. Use only the screws provided, not the doorbell's stock backplate screws.
Will it hold up outdoors, and for how long?
Yes. We print in UV-stabilized PETG (not brittle PLA), so it's freeze-tolerant and won't yellow or warp. Real-world installs are still going strong after 4+ years.
Does the mount block the camera or speaker at steep angles?
No. The bracket holds the doorbell clear of the lens and mic across the entire 15-90° range, so the picture and two-way audio stay unobstructed even at a hard 90° turn.

✔ Replacement Guarantee — The Right Part, Guaranteed

Send a photo of your install spot and doorbell BEFORE you order and we'll point you to the exact part. If you order and it doesn't fit, we'll send the correct one at NO additional cost.

  • Before ordering: text or email photos of (1) the install location and (2) the doorbell; we'll confirm the fit.
  • If it doesn't fit: send a photo of the doorbell and the fit problem — we ship the correct part free.
  • Reach us: 833-326-6868 / shop@doorbellmount.com.
Where to get this doorbell: The Xfinity Home Video Doorbell (SCHB1AEW) comes with a Comcast Xfinity Home plan (not sold on Amazon). This mount fits the doorbell you already have installed.

Questions?

Standard Color: Black. Other colors via the Color Change Request.

Angle Note: "15-90°" is the approximate range for perpendicular installs; actual angle depends on positioning.

3D-Printed: minor layer lines may show and do not affect strength or weather resistance.

Stop aiming your Xfinity Home Video Doorbell (SCHB1AEW) at the siding — order this side-wall mount and we ship in 2-3 business days.