Google Nest Doorbell (Battery, 2021) 15-90° Angle Mount | Point the Head-to-Toe View at Your Doorstep

$50.00
$40.00
15-90° Adjustable Angle Mount — Google Nest Doorbell (Battery, 2021) Custom-Fit for the Google Nest Doorbell (Battery, 2021) Custom-shaped for the Google Nest Doorbell (Battery, 2021) — the larger Nest Doorbell (battery, 2021) body. Works wired or on battery, and...
Availability: Many In Stock
Product Type: Adjustable Mount 15-90°

15-90° Adjustable Angle Mount — Google Nest Doorbell (Battery, 2021)

Custom-Fit for the Google Nest Doorbell (Battery, 2021)

  • Custom-shaped for the Google Nest Doorbell (Battery, 2021) — the larger Nest Doorbell (battery, 2021) body. Works wired or on battery, and the charging port stays reachable.
  • Not a universal one-size mount: other doorbell brands use different body shapes and each has its own listing on our store.
  • Switching doorbells later? The base stays on the wall — grab a ~$10 Replacement Bracket for the new model.
Don't have the doorbell yet? Get the Google Nest Doorbell (Battery, 2021) on Amazon →

Recover the View on a Side-Wall Install

The Nest Doorbell (battery) uses a tall 3:4 head-to-toe view built to catch porch packages. Mounted on a side wall, the stock plate aims that view at the wall instead of your visitor.

This adjustable 15-90° set-screw pivot mount swings the Google Nest Doorbell (Battery, 2021) outward across a wide 15° to 90° arc so the 3:4 145° head-to-toe view lands on your visitor and the doorstep instead of the wall. Set screws lock the angle so it will not drift after the first windstorm or cold snap.

Two-Axis Aim Across a Wide 15-90° Arc

Built for real angle correction, the set-screw pivot lets you aim across a 15° to 90° arc relative to the wall — it shines above 45°. Adjust left/right and up/down, then tighten the set screws to lock it.

15-90 degree side-wall swivel adjustability diagram for Google Nest Battery Doorbell (Wireless, 2021)
15° to 90° of dual-axis aim for perpendicular-wall installs.

Only need a small nudge (<15°) or a straight-ahead view? See our 0-35° Swivel Mount for the Google Nest Doorbell (Battery, 2021) instead.

Clean, Concealed Wiring

If you're hardwiring (8-24V AC, optional), the wires come out of the wall, pass through the concealed channel in the swivel, run through the front Google Nest Doorbell (Battery, 2021) bracket, and land on the doorbell terminals — nothing exposed at the joint.

Concealed wire routing for the 15-90 degree swivel mount and Google Nest Battery Doorbell (Wireless, 2021)

Dimensions at a Glance

  • Base Width: 1.8 in
  • Base Height: 3.1 in
  • Base Hole Spacing: 2-5/8 in (center-to-center)
  • Reach at 15°: ~2.0 in
  • Reach at 90°: ~3.5 in
  • Weight: ~2 oz (mount only)
  • Standard 1.8" base; a narrow 3/4" baseplate is available — see Customization.

Features That Matter

  • Custom Bracket for the Google Nest Doorbell (Battery, 2021): A pre-shaped pocket cradles the body without blocking the lens, mic, or field of view.
  • Hidden Wire Pass-Through: An internal channel routes the low-voltage leads cleanly to the doorbell terminals.
  • Locking Set Screws: Set the angle once and it stays put — no drift in cold weather or after a firmware update.
  • Siding Compatible: Sits flat on flat surfaces or lapped siding up to 1.8 inches wide.
  • Complete Kit: Adjustable base, custom Google Nest Doorbell (Battery, 2021) bracket, and all the mounting screws you need.
  • UV-Stable PETG: Freeze-tolerant, weatherproof 3D-printed PETG made for year-round outdoor use.
  • Reusable Base: Switch doorbell brands later and just order a ~$10 Replacement Bracket — the base stays on the wall.

Customize It

Installing It on the Google Nest Doorbell (Battery, 2021)

  1. Power first. Hardwiring? Kill the doorbell circuit at the breaker. Battery-only? Skip the breaker and charge the battery first.
    If hardwiring, confirm power is off with a multimeter before stripping wires.
  2. Grab your tools. Drill, PH2 (#6 wall screws), PH1 (#4 bracket/set/doorbell screws), a level, and anchors if you're not hitting a stud.
  3. Pick the angle before drilling. Stand where a visitor stands, picture the line from the doorbell to that spot, and rough in that angle so you don't re-drill.
  4. Mount the base. Line it up with your siding or trim and drive the #6 screws (PH2).
    Pilot-drill if needed and don't overtighten.
  5. Add the swivel. Feed the wires through the center (skip if battery) and fasten the swivel to the base with the four #4 / PH1 screws.
  6. Rough-set the aim. Turn it toward the walkway inside the 15-90° range and snug one or two set screws for now.
  7. Attach the Google Nest Doorbell (Battery, 2021). Snap it on with the screws included with this mount (PH1). Do not reuse the stock back plate — our bracket replaces it.
  8. Confirm in the Google Home app, then lock. Power up, open Live View, check the framing, and tighten all set screws hand-tight.
    Snug is enough — don't crank the set screws.
  9. Redraw detection zones. In the Google Home app, tighten the motion zones to the new framing so you exclude the street and the neighbor's yard.

FAQ

Is this really shaped for the Google Nest Doorbell (Battery, 2021)?
Yes — this bracket is cut to the Google Nest Doorbell (Battery, 2021) body, so the doorbell drops into a model-specific pocket with the lens and mic clear. It does not fit other brands; each has its own listing.
What hardware is included?
You get the adjustable swivel base, the custom adapter bracket, locking set screws, mounting screws (#6 PH2 for the wall and #4 PH1 for the bracket and doorbell), and wall anchors. Use only the screws provided, not the doorbell's stock backplate screws.
Will it hold up outdoors, and for how long?
Yes. We print in UV-stabilized PETG (not brittle PLA), so it's freeze-tolerant and won't yellow or warp. Real-world installs are still going strong after 4+ years.
Does the mount block the camera or speaker at steep angles?
No. The bracket holds the doorbell clear of the lens and mic across the entire 15-90° range, so the picture and two-way audio stay unobstructed even at a hard 90° turn.
What if I order and it doesn't fit?
Send us a photo of your doorbell and the fit issue and we'll ship the correct part at no extra cost — see our Replacement Guarantee below.

✔ Replacement Guarantee — The Right Part, Guaranteed

Send a photo of your install spot and doorbell BEFORE you order and we'll point you to the exact part. If you order and it doesn't fit, we'll send the correct one at NO additional cost.

  • Before ordering: text or email photos of (1) the install location and (2) the doorbell; we'll confirm the fit.
  • If it doesn't fit: send a photo of the doorbell and the fit problem — we ship the correct part free.
  • Reach us: 833-326-6868 / shop@doorbellmount.com.

Need the Doorbell?

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you.

Questions?

Standard Color: Black. Other colors via the Color Change Request.

Angle Note: "15-90°" is the approximate range for perpendicular installs; actual angle depends on positioning.

3D-Printed: minor layer lines may show and do not affect strength or weather resistance.

Stop aiming your Google Nest Doorbell (Battery, 2021) at the siding — order this side-wall mount and we ship in 2-3 business days.