Narrow Base (3/4") Adjustable Swivel Doorbell Mount (15-90°) | Select Model
Fits Narrow Trim! Select Your Doorbell Model.
This versatile swivel mount includes a **Narrow Base Plate (3/4" wide)**, making it perfect for installation on slim door trim or other tight surfaces (requires minimum 3/4" width).
- You MUST select your specific Doorbell Model and Brand from the options list. We send a custom-fit adapter bracket for your doorbell.
- Compatible with many popular brands (Ring, Nest, Eufy, Wyze, Blink, Reolink, etc.).
- Unsure of model / Not listed? Contact us with a picture! (Details below).
Need help identifying a Ring model? Check our Ring Model Guide.
Solve Sidewall & Narrow Trim Installations!
Struggling to mount your video doorbell on a narrow 3/4" surface? Or need to aim your camera from a wall perpendicular to your door? This **15-90° Adjustable Swivel Mount with Narrow Base** is engineered for these exact challenges!
Its **ultra-slim 3/4" base** fits where standard mounts can't, while the wide **15° to ~90° dual-axis swivel** provides maximum flexibility to aim your camera left, right, up, or down – perfect for getting the right view from side walls or correcting angles on uneven siding.
Wide-Range Dual-Axis Swivel (15-90°)
Achieve unparalleled aiming flexibility. The robust swivel joint allows extensive adjustment up, down, left, or right across a wide 15° to 90° arc relative to the wall, ideal for turning the camera completely sideways.
Adaptable Base Installation: The included NARROW base plate (3/4" wide) can be mounted vertically or horizontally, ensuring adaptability while keeping your doorbell upright.
Mount Dimensions (Narrow Base Version)
- Base Width: 3/4 inches (0.75") - Designed for narrow trim >= 3/4" wide.
- Base Length: Approx. 2.5 inches (Standard for narrow base).
- Base Hole Spacing: Typically 2 inches center-to-center (Confirm if critical for your existing holes).
- Swivel Top Extension: Varies significantly based on the 15°-90° angle set. Includes neck for clearance.
Key Features & Benefits:
- Narrow 3/4" Base: Specifically designed for slim trim and tight mounting spots.
- Wide Angle Range (15-90°): Max flexibility with dual-axis swivel (horizontal & vertical).
- Ideal for Sidewalls: Easily turn doorbell up to 90 degrees to face entry path.
- Custom Fit Bracket: Select your doorbell model for a perfect adapter plate.
- Secure Locking: Set screws hold the chosen angle firmly.
- Wire Passthrough: Central channel for neat wiring.
- Durable PETG: Weather-resistant material for outdoor use.
- Hardware Included: Comes with narrow base, swivel assembly, custom adapter, and all needed screws.
- Future-Proof System: Base system allows swapping adapter brackets for future doorbell upgrades (available here).
Installing Your 15-90° Narrow Base Swivel Mount
-
Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed), doorbell & its specific mounting hardware/tools (if any).
Turn OFF power at the breaker if hardwiring!
-
Mount NARROW Base: Route wires through the **Narrow (3/4" Wide) Base Piece**. Position on your >=3/4" trim/wall (screws vertical or horizontal). Attach securely using appropriate screws (#6 size likely, use PH2) and anchors into the base's mounting holes (typically 2" spacing - verify).
Ensure base is level & secure. Don't overtighten base screws.
-
Attach Swivel Bracket to Base: Route wires through the **Swivel Bracket**. Align onto Narrow Base & attach using the four center screws provided (likely **#4 / PH1 driver**).
Use correct PH1 bit. Tighten until flush. Do NOT over-torque.
- Set Initial Angle (15-90°): Adjust swivel bracket (up/down & left/right). Lightly tighten one/two **set screws** (likely #4 / PH1 driver).
- Wire Doorbell: Connect wires per manufacturer's instructions. Tuck excess wire.
-
Attach Doorbell to Bracket:
- Align your selected doorbell model (or its specific backplate if required) with the pre-drilled holes on the custom swivel mount adapter bracket.
- Secure doorbell/plate using screws PROVIDED WITH THIS MOUNT (likely #4 / PH1 driver).
- DO NOT USE screws that came with your doorbell for this step. Follow any final steps for your specific doorbell model (e.g., attaching faceplate with security screws).
Use correct drivers. Tighten screws snugly. -
Finalize & Secure Angle: Make final angle adjustments. Fully tighten all **set screws** (likely PH1 driver) gently but firmly.
Do not overtighten set screws!Turn power back on and test.
Follow safety rules & your doorbell's guidelines. Use appropriate wall anchors. Using correct Philips bit size prevents damage.
Optional Add-ons & Accessories:
Enhance your installation:
-
Wire Extension Kit
Need longer wires for your installation? Purchase our kit with your choice of connectors.
Want your mount in White, Brown, Grey, or another color? Add this service to your order.
Installation Video & Examples
Example showing 90 degree angle capability:
General installation concept video:
(Video shows general installation principles for swivel mounts.)
Questions? Need Help Selecting Your Model or Options?
We're here to help! If you're unsure about your doorbell model, need a custom solution, or your model isn't listed, please reach out:
- Email: shop@doorbellmount.com (Send pictures!)
- Text/Call: 1-833-326-6868 (Text pictures!)
Standard Color: Ships in Black. For other colors, add the Color Change Request listing.
Angle Note: The maximum 90-degree angle is approximate and relative to the mounting surface; actual view depends on installation.
3D Printed Quality: Made using durable PETG. Minor cosmetic variations inherent to 3D printing may exist but do not affect function. Contact us with quality concerns before reviewing.
Doorbell Not Included. Kit includes narrow base, swivel assembly, custom top bracket, and installation hardware.
Order the Narrow Base 15-90° Swivel Mount today for ultimate flexibility in tight spaces! Remember to select your doorbell model for a perfect fit.
