90° Adjustable Swivel Mount for Ring Wired Doorbell Plus (Formerly Pro)
Compatibility Check: Which Ring Pro Model Do You Have?
This mount fits the Ring Wired Doorbell Plus (which Ring previously called the Ring Pro or "Pro 1"). Key identifier: It has a Flat Back with Ridges.
(As an Amazon Associate, I earn from qualifying purchases.)
CRITICAL: This mount DOES NOT FIT the newer Ring Wired Doorbell Pro (Pro 2).
Confused? Please send us a picture before ordering!
Need help? Check our Ring Model Guide or contact us: Email shop@doorbellmount.com / Text 1-833-326-6868.
Maximum Coverage with 90° Swivel Adjustment
Want complete viewing control for your Ring Wired Doorbell Plus (Pro 1)? This powerful 90° swivel mount offers full dual-axis control from 0° all the way to 90°, giving you the ultimate flexibility to capture every angle.
Whether you're mounting on a corner, angled wall, or need to look straight down a porch, this mount delivers the range you need. Perfect for maximizing coverage while keeping your setup clean and professional-looking.
Complete Dual-Axis Control (0-90°)
From flat to fully perpendicular, you have total control. Adjust both left/right and up/down within the full 90° range. No blind spots, no compromise—just precise aiming at any angle.
Smart Base Design: Mount vertically or horizontally depending on your trim or siding. The doorbell stays upright in either configuration.
Mount Dimensions
- Base Width: 1.8 inches
- Base Height: 3.1 inches
- Base Hole Spacing: 2-5/8 inches (center-to-center)
- Total Extension (@ 0° Angle): Approx. 1.5 inches from wall
- Total Extension (@ 90° Angle): Approx. 3.0-3.5 inches from wall (depends on exact angle)
Key Features & Benefits:
- Perfect Fit: Exclusively designed for Ring Wired Doorbell Plus (formerly Ring Pro) - Verify Your Model!
- Full Range (0-90°): Dual-axis swivel for maximum viewing angles.
- Robust Extension: Extends further from wall than 35° mounts for dramatic angles.
- Secure Angle Lock: Set screws included (likely #4 / PH1) to hold your chosen angle firmly.
- Flexible Installation: Base mounts vertically or horizontally. Fits surfaces up to 1.8" wide. Adapters for narrower spots available (down to 1/2").
- Wire Management: Convenient central hole for doorbell wiring.
- Weather Resilient: Made from durable PETG plastic rated for outdoor use.
- Complete Hardware Set: All screws and fasteners for base, bracket, doorbell, and angle locking included.
How to Install Your 90° Swivel Mount
-
Prepare Tools & Area: Gather necessary tools:
- Drill (with appropriate bits).
- Screwdrivers/Bits: PH2 Philips (#6 base screws) AND PH1 Philips (#4 bracket/set/doorbell body screws provided by us). Use correct size!
- Wall anchors (if needed). Level (optional).
Turn OFF power to doorbell wiring at the breaker before starting!
-
Mount the Base: Route wires through the base piece. Position base (screws vertical or horizontal) and attach securely using provided #6 screws (PH2 driver) or suitable anchors.
Drill Warning: Use low speed/clutch. Do not overtighten (risk of stripping screws or cracking plastic).
-
Attach Swivel Bracket: Route wires through the swivel bracket. Align onto base and attach using the four center screws provided (likely #4 screws / PH1 driver).
Stripping Warning: Use correct PH1 driver. Tighten snugly by hand first, avoid overtightening with drill.
- Set Initial Angle: Adjust swivel bracket (up/down & left/right) within the 0-90° range. Lightly tighten one/two set screws (likely underside, #4 / PH1 driver).
- Wire Your Doorbell: Connect wires following Ring's instructions. Tuck excess wire into the mount cavity.
-
Attach Doorbell to Mount Bracket:
- Align your Ring Wired Doorbell Plus (or its plate if used) with the pre-drilled holes on the swivel mount bracket.
- Secure doorbell/plate using the shorter screws PROVIDED WITH THIS MOUNT (likely #4 screws / PH1 driver).
- DO NOT USE screws that came with your doorbell for this step (they may be too long).
- Replace cover if applicable.
Stripping Warning: Use correct PH1 driver for provided screws. Tighten snugly, do not overtighten with drill.
-
Finalize Angle & Secure: Make final angle adjustments. Fully tighten all set screws using the correct driver (likely PH1) and gentle pressure.
Do not overtighten set screws with a drill!
Turn power back on and test.
Always follow safety precautions & Ring's wiring instructions. Use appropriate anchors. Use the correct size Philips driver (PH1 for #4, PH2 for #6) to avoid stripping.
Why Choose the 90° Swivel Mount?
Maximum Coverage & Flexibility
This Swivel Mount offers exceptional control for dramatic angle adjustments. The 0-90° dual-axis range allows you to capture the widest areas without blind spots, perfect for corners, angled walls, or any installation requiring extreme positioning.
Robust & Durable
Its extended design provides substantial reach and support. Crafted from robust PETG, it ensures lasting durability against weather, protecting your Ring Wired Doorbell Plus installation for years.
Installation Concept Videos
General installation concept shown below:
Verify Compatibility or Ask Questions!
Double-check your model! Ring names are confusing. If you're not 100% sure you have the Wired Doorbell Plus (formerly Pro), please send us a picture before ordering!
- Email: shop@doorbellmount.com
- Text/Call: 1-833-326-6868
Need adapters for narrow trim? Contact us!
Standard Color: Black. Need a different color? Please purchase the separate Color Change Request listing along with this mount.
Angle Range Note: This mount provides an adjustable range from approximately 0° (flat) to 90° relative to the mounting surface. The exact angle achieved depends on installation specifics.
3D Printed Quality: While 3D printing provides really good production quality parts, there are often minor imperfections that may be found on the prints. These do not impair the function and rarely affect the aesthetics. But if you're not happy with the quality, please text, email, or message me before leaving a review.
Order your 90° Adjustable Swivel Mount today for maximum coverage of your Ring Wired Doorbell Plus (formerly Pro)!
