15-90° Adjustable Swivel Mount for Ring Battery Doorbell Pro (2nd Gen, 2026) | Retinal 4K | Locked Pivot for Wireless 4K

$50.00
$40.00
Custom 15-90° Side-Wall Mount for the Ring Battery Doorbell Pro (2nd Gen, 2026) — Retinal 4K Custom-Fit for the Ring Battery Doorbell Pro 2nd Gen — Retinal 4K This bracket is shaped specifically for the Ring Battery Doorbell Pro (2nd...
Availability: Many In Stock
Product Type: Adjustable Mount 15-90°

Custom 15-90° Side-Wall Mount for the Ring Battery Doorbell Pro (2nd Gen, 2026) — Retinal 4K

Custom-Fit for the Ring Battery Doorbell Pro 2nd Gen — Retinal 4K

  • This bracket is shaped specifically for the Ring Battery Doorbell Pro (2nd Gen, 2026) — Amazon ASIN B0FPPWKMGK. Ring's first 4K Retinal battery doorbell — quick-release battery, head-to-toe HDR, and AI Pro Smart Notifications.
  • Does NOT fit: the Ring Battery Plus 2nd Gen, the Battery 2nd Gen, the older Ring 4 / 3 / 3+ / 2, or any wired Ring doorbell. Each Ring doorbell has its own dedicated mount listing on our store.
  • Not sure which Ring you have? Send a photo of the back of your doorbell to shop@doorbellmount.com or text us — we'll confirm fit before you order.
Don't have the doorbell yet? Get the Ring Battery Doorbell Pro 2nd Gen on Amazon →

Need help identifying a Ring model? Check our Ring Model Guide or our Best Ring Doorbells 2025 Guide.

Lock the Battery Pro Where It Needs to Look

The Ring Battery Doorbell Pro 2nd Gen brings Retinal 4K to a battery-powered body — Ring's first wireless 4K doorbell. But 4K resolution is wasted if the camera is staring at siding because the only mounting spot was a side wall. This Adjustable 15-90° Side-Wall Mount swings the Battery Pro outward through a wide arc and locks it permanently.

We optimized the bracket pocket for the Pro 2nd Gen's removable quick-release battery — you can pop the battery for charging without disturbing the wall mount or losing your aim. Set the angle once, never aim it again.

Wide Dual-Axis Control (15-90°) — Built for the Retinal 4K Lens

Designed for significant angle correction, this mount features a unique bent-neck swivel joint. Precise aiming control across a 15° to 90° arc relative to the wall — ideal for side-facing views (excels at angles greater than 45°). Fine-tuning is possible both horizontally (left/right) and vertically (up/down). Once the angle is set, the locking set screws hold position permanently — critical for Retinal 4K sharpness on any side-wall install.

15-90 degree side-wall swivel mount adjustability diagram for Ring Battery Doorbell Pro 2nd Gen
15° to 90° pivot — dual-axis swivel for perpendicular-wall installs.

Note: this design is optimized for substantial side angles. If you only need a very minor (<15°) adjustment or a straight-ahead view, see our 0-35° Swivel Mount for the Ring Battery Doorbell Pro 2nd Gen instead.

Internal Wire Routing — Hidden & Protected

Doorbell wiring (or PoE cable, where applicable) enters from the wall, passes through the hidden internal channel inside the swivel joint, routes through the front Ring Battery Doorbell Pro 2nd Gen adapter bracket, and connects directly to the doorbell terminals. No exposed wiring, no weather risk — even at extreme 90° angles.

Internal wire routing diagram — wires pass cleanly through the 15-90 degree swivel mount and connect to the Ring Battery Doorbell Pro 2nd Gen terminals

Mount Dimensions & Weight

  • Base Width: 1.8 inches
  • Base Height: 3.1 inches
  • Base Hole Spacing: 2-5/8 inches (center-to-center)
  • Wall Extension at 15°: ~2.0 inches
  • Wall Extension at 90°: ~3.5 inches (extends doorbell perpendicular to wall)
  • Weight: ~2 oz (PETG mount only)
  • (Note: This is the standard 1.8" base; narrow 3/4" baseplate option available — see Customization section.)

Key Features & Benefits

  • Wide Adjustable Angle (15-90°): Significant dual-axis swivel built specifically for side-wall / perpendicular installations.
  • Custom-Fit Bracket for Ring Battery Doorbell Pro 2nd Gen: Bracket pocket shaped around the quick-release battery — pop the battery without removing the mount.
  • Secure Locking Set Screws: Once you set the angle, it stays. No drift in cold weather, no need to readjust after firmware updates.
  • Wire Pass-Through: Hole in the swivel joint routes the doorbell's power cable neatly — no exposed wiring at the joint.
  • Siding Compatible: Flat surfaces or lapped siding up to 1.8 inches wide.
  • Complete Kit: Adjustable base, custom Ring Battery Doorbell Pro 2nd Gen bracket, and all necessary mounting screws.
  • Durable PETG: Sturdy 3D-printed PETG, UV-stable and freeze-tolerant for outdoor use.
  • Side-Wall Problem Solver: Eliminates the "side wall view" issue for proper security coverage of the porch.
  • Future-Proof Base: Base is compatible with future Ring doorbell adapter brackets — when Ring releases the next generation, just swap the small ~$10 adapter. Find replacement brackets here.

Customization & Add-On Options

We offer solutions for almost any mounting situation:

Installing Your 15-90° Side-Wall Mount on the Ring Battery Doorbell Pro 2nd Gen

  1. Tools & Prep: Gather a drill, PH2 Philips (#6 base screws), PH1 Philips (#4 bracket/set/doorbell screws provided), wall anchors if needed, level, and a multimeter.
    Battery-powered (quick-release battery) — no transformer required. Optional trickle-charge wiring (8-24V AC) via back terminals.
  2. Plan the Aim Angle BEFORE Drilling: Stand where a visitor would stand. Visualize the angle from the doorbell location to that spot. 15-90° gives you a wide range — but committing to roughly the right angle before drilling pilot holes saves rework.
  3. Mount the Base: Route any existing doorbell wires through the base hole. Position vertical and attach using #6 screws (PH2 driver) with anchors as needed.
    Drill pilot holes if needed. Don't overtighten base screws.
  4. Attach the Swivel Bracket: Route wires through the swivel joint. Align onto the base and attach using four center screws (#4 / PH1 driver).
  5. Set Initial Angle: Adjust the swivel within 15-90° toward the visitor approach. Lightly tighten one or two set screws (#4 / PH1 driver) — final tightening comes after Live View confirmation.
  6. Wire the Ring Battery Doorbell Pro 2nd Gen (or seat the battery): If hardwired, connect the two leads to the doorbell screw terminals — polarity doesn't matter for AC. If battery-only, you'll seat the battery at step 8.
  7. Attach the Doorbell to the Bracket: Align the Ring Battery Doorbell Pro 2nd Gen with the pre-drilled holes on the custom Ring Battery Doorbell Pro 2nd Gen-specific bracket. Secure using the screws PROVIDED WITH THIS MOUNT (#4 / PH1 driver). DO NOT USE the screws or wedge plate that came with your Ring doorbell.
    Tighten snugly, do not overtighten. Use the correct PH1 driver for provided screws.
  8. Aim Using Live View & Finalize Set Screws: Restore power (or insert the battery). Open the Ring app → Live View. With Retinal 4K, you'll spot side-wall misalignment instantly. Adjust the 15-90° swivel until the porch path is centered, then lock the set screws.
    Do not overtighten set screws — hand-tight is sufficient. Over-tightening can crack the swivel joint.
  9. Tune Smart Notifications + Motion Zones: In the Ring app, redraw motion zones to match the new angle. Side-wall installs benefit from a tighter "porch path" zone — the wider 90° angle catches more peripheral motion (cars passing, mail truck) that you'll want to exclude.

Side-wall tip: extreme 90° angles slightly increase wind load on the doorbell. The set-screw lock is rated for it, but on installs in high-wind regions (coastal, exposed corners), the bracket's wider extension at 90° puts slight pre-loaded weight on the joint — completely fine, just normal for side-wall geometry.

FAQ — Ring Battery Doorbell Pro 2nd Gen 15-90° Mount

Will this 15-90° mount fit the Ring Battery Doorbell Pro 2nd Gen (2026)?
Yes. Custom-shaped for the Ring Battery Doorbell Pro 2nd Gen (2026), Amazon ASIN B0FPPWKMGK. This is Ring's first 4K Retinal battery doorbell. The mount will NOT fit the Ring Battery 2nd Gen (smaller), the Battery Plus 2nd Gen, or any older Ring doorbell.
Will the side-wall angle hurt my 4K image quality or AI Pro Smart Notifications?
No. The mount holds the camera permanently in position — no drift, no rocking. With the set screws locked, framing is consistent enough for AI Pro to learn the scene reliably. After install, redraw motion zones in the Ring app to match the new geometry.
Can I swap the quick-release battery without taking the doorbell off the wall?
Yes. Bracket clearance lets you press the release latch and slide the battery out for charging while the doorbell stays mounted. Pop in a charged spare and you're back online in under a minute. The aim angle stays locked thanks to the set screws.
Does this Pro 2nd Gen mount differ from the standard Battery 2nd Gen mount?
Yes. The Pro body is taller and houses the 4K Retinal sensor + larger battery, so the bracket pocket has different proportions. The smaller Battery 2nd Gen bracket will not seat the Pro flush.
How is this different from the 0-35° Battery Pro 2nd Gen mount?
Use the 15-90° version for side-wall, corner, or perpendicular installs. Use the 0-35° version for flat-wall installs that need only fine-tune aim. If you need more than 15° of correction, choose this 15-90° version.
Can I trickle-charge the Battery Pro 2nd Gen via existing doorbell wires?
Yes. The Pro 2nd Gen accepts 8-24V AC trickle-charge wiring at the back terminals. If you have existing doorbell wires at the install location, route them through the mount's internal channel and connect for continuous topping-off.
Will I get full 4K Retinal video at extreme side-wall angles?
Yes. 4K resolution is independent of aim angle — the sensor captures full Retinal 4K regardless of where the body is pointed. The benefit of this mount is that 4K footage actually shows visitors instead of siding.

Installation Video & Examples

Example 90 degree side wall doorbell installation Adjustable base component for side-wall doorbell mount
Watch: Swivel Doorbell Installation Video

(Video shows general installation principles for our swivel mounts.)

Need to Buy the Doorbell or Accessories?

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you.

Questions? Need Help?

We're here to help! If you're unsure about your Ring model or need a custom solution for your 90-degree install:

Standard Color: Ships in Black. For other colors, use the Color Change Request.

Angle Note: The term "15-90°" represents the approximate adjustment range for perpendicular installations. Actual achievable angle depends on positioning.

3D-Printed Parts: Minor cosmetic variations or layer lines may be present and do not affect strength or weather resistance.

Order your Adjustable 15-90° Side-Wall Mount for the Ring Battery Doorbell Pro 2nd Gen today — finally get the right view from your side-mounted doorbell.