Standard Offset Brick Extension for Ring Video Doorbell Wired (formerly "Ring Wired 2021") (2021) | 1080p HD | Hardwired Entry-Level | 2 Mounting Holes | Storm Door Clearance

$39.00
Standard Offset Brick Extension for the Ring Video Doorbell Wired (formerly "Ring Wired 2021") ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee Standard Offset Brick Mount for the Ring Video Doorbell Wired...
Availability: Many In Stock
Product Type: Brick Mount

Standard Offset Brick Extension for the Ring Video Doorbell Wired (formerly "Ring Wired 2021")

✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee

Standard Offset Brick Mount for the Ring Video Doorbell Wired (formerly "Ring Wired 2021") — Push Past the Trim & Clear the Door

This Standard Offset Brick Extension for the Ring Video Doorbell Wired (formerly "Ring Wired 2021") (1080p HD, no battery — hardwired only (low-voltage 16-24V AC doorbell wires)) pushes your doorbell forward past the trim and slightly sideways over the edge of the brick — clears storm doors, frees up wide-angle field of view, and keeps the install clean. Custom-cut depth from 1/4 inch to 8 inches.

Sized specifically for the Ring Video Doorbell Wired (formerly "Ring Wired 2021", $50 entry-level, 2 mounting holes) (Amazon ASIN B08CKHPP52). 3D-printed to-order in the USA from UV-stable PETG, freeze-tolerant. Free shipping over $100. Replacement Guarantee covers a swap if your measurement is off.

CRITICAL: How to Measure for Standard Offset

Standard Offset Brick Extensions are custom-cut to your exact depth. The default 3-inch size works for most storm-door / standard brick installs; pick a different size only if you have a specific gap to fill.

How to measure for Ring Video Doorbell Wired (formerly
Most common pick: 3" (default). Works for standard 3-inch brick with trim near the brick face and a typical storm door swing. If you're unsure, this is the right starting point.
Custom measurement: Measure the gap between your existing mounting surface and where you need the doorbell to sit. Pick the variant matching that depth.

Not sure? Send a photo and your measurement to shop@doorbellmount.com — we'll confirm the right depth before you order. Wrong size? Replacement Guarantee covers a free swap.

Compatibility — Custom-Cut for the Ring Video Doorbell Wired (formerly "Ring Wired 2021", $50 entry-level, 2 mounting holes)

  • This standard offset brick extension is custom-cut for the Ring Video Doorbell Wired (formerly "Ring Wired 2021", $50 entry-level, 2 mounting holes). This is Ring's entry-level $50 wired-only doorbell — small slim body with just 2 mounting screw holes on the back (not 4 like the wired Pro / Pro 2). Hardwired only; no battery. Same model is now sold as "Ring Video Doorbell Wired".
  • Does NOT fit:
    • Ring Wired Doorbell Plus (formerly Pro, flat back with ridges) — that has 4 mounting holes
    • Ring Wired Doorbell Pro (formerly Pro 2, curved back) — that has 4 mounting holes
    • Ring Wired Doorbell 2nd Gen (2026, Retinal 2K) — that's a separate listing
    • Ring Wired Doorbell Plus 2nd Gen (2025, Retinal 2K) — that's a separate listing
    • Any Battery Ring doorbell
  • Quick fit test: Look at the back of your Ring — if you see exactly 2 mounting holes AND it has no battery and was sold around $50, this is the right listing.
  • Not sure which Ring you have? Send a photo of the back of your doorbell to shop@doorbellmount.com — we'll confirm fit before you order.
Don't have the doorbell yet? Buy the Ring Video Doorbell Wired on Amazon →

Standard Offset — Doorbell Pushed Forward + Slightly Sideways

This is the right pick when your doorbell is mounted on trim that's level with (or slightly behind) the brick face, and you need to push it forward to clear a storm door, get a wider field of view, or get the doorbell out of a corner.

Pick the right offset for your install: Use this Standard Offset for a moderate forward push and a small sideways shift over brick. Use Full Offset Brick Mount if you need MAXIMUM sideways clearance (side-of-brick or storm-door edge installs). Use Brick Face Extension if your doorbell would otherwise be recessed BEHIND the brick face and you want it flush.

Standard Offset Brick Extension Dimensions & Material

  • Front Face Width: Sized to fit the Ring Video Doorbell Wired (formerly "Ring Wired 2021") body (custom adapter bracket on front)
  • Base Width: 9/16 inch (slim profile, fits within standard wood trim)
  • Depth: Custom-cut from 1/4 to 8 inches in 1/8-inch increments (52 sizes)
  • Pricing: Scales with depth from $35 (1/4") up to $96 (8")
  • Base Mounting: 2 holes in the rear of the base, designed to anchor in WOOD TRIM with #6 screws (#2 Phillips driver)
  • Material: UV-stable PETG, 3D-printed in the USA, freeze-tolerant across normal North American climates

Key Features & Benefits

  • Custom-Cut Depth: Pick your exact gap from a wide range of sizes.
  • Custom-Fit Front Bracket: Adapter bracket sized exactly for the Ring Video Doorbell Wired (formerly "Ring Wired 2021").
  • Trim-Mount Rear: Back anchors into wood trim with 2 #6 screws — no masonry drilling required for most installs.
  • Internal Wire Routing: 16-24V AC doorbell wires (or USB-C trickle charge cable) route through the back-to-front cavity — no exposed wiring.
  • Complete Hardware Kit: 2x #6 base screws, 4x #4 small screws (preinstalled in adapter bracket), doorbell-mount screws.
  • UV-Stable PETG: Freeze-tolerant 3D-printed PETG — real-world installs at 4+ years and counting.
  • Made in the USA: 3D-printed to-order. No inventory wait, no overseas shipping.
  • Replacement Guarantee: If your measurement is off, we ship the right depth at no extra cost.

Customization & Add-On Options

Installing Your Standard Offset Brick Extension on the Ring Video Doorbell Wired (formerly "Ring Wired 2021")

  1. Prepare: Remove your existing Ring Video Doorbell Wired (formerly "Ring Wired 2021") from the wall. If the doorbell is hardwired (Wired model), turn off power at the breaker first and disconnect the two transformer leads. Battery models — just pop the doorbell off the existing plate.
  2. Wire Routing: If hardwired, lead the transformer leads through the rear of the extension to the front.
  3. Mount the Extension Base: Position the back of the extension over the wood trim (or recessed mounting surface) where your old doorbell was. The base anchors to the trim with 2 provided #6 wood screws using a #2 Phillips screwdriver.
  4. Attach the Mounting Bracket: Fasten the Ring Video Doorbell Wired (formerly "Ring Wired 2021") adapter bracket to the front of the extension using the 4 small #4 center screws (preinstalled). USE #1 Phillips PRECISION screwdriver for the smaller screws.
  5. Mount the Doorbell: Slot the Ring Video Doorbell Wired (formerly "Ring Wired 2021") body onto the front face of the extension. If hardwired, connect the two leads first.
  6. Secure and Finalize: Mount the Ring Video Doorbell Wired (formerly "Ring Wired 2021") to the bracket using the screws PROVIDED WITH THIS MOUNT (not the original Ring screws). Reinstall the cover. Apply silicone caulk along the back perimeter where the extension meets the trim/brick if needed (skip the bottom edge for drainage). Restore power if applicable. Open the Ring app → Live View. Verify framing and redraw motion zones.

Tools recap: #2 Phillips screwdriver (#6 wood screws), #1 Phillips PRECISION screwdriver (#4 adapter screws and doorbell screws), drill (optional pilot holes), level, multimeter (wired models), clear silicone caulk.

FAQ — Ring Video Doorbell Wired (formerly "Ring Wired 2021") Standard Offset Brick Extension

Does this fit the Ring Video Doorbell Wired (formerly "Ring Wired 2021")?
Yes — the front-face mounting plate is shaped for the Ring Video Doorbell Wired (formerly "Ring Wired 2021", $50 entry-level, 2 mounting holes). This is Ring's entry-level $50 wired-only doorbell — small slim body with just 2 mounting screw holes on the back (not 4 like the wired Pro / Pro 2). Hardwired only; no battery. Same model is now sold as "Ring Video Doorbell Wired".
How do I measure for the right depth?
See the Measurement Guide above. For Brick Face installs: trim-to-brick-face distance, minus 1 inch (doorbell thickness). For Standard Offset: the default 3-inch size works for most installs; pick a different size only if you have a specific gap to fill.
What if I order the wrong depth?
Send us a picture of your install attempt and the doorbell. Under our Replacement Guarantee, we'll ship the correct depth at NO additional cost. Reach out via text or email before installing the wrong one.
What screwdriver do I need for the small bracket screws?
A #1 Phillips PRECISION screwdriver. The #4 center screws are too small for a regular #1 Phillips — you need a precision driver (the kind used for eyeglasses or electronics).
Is the extension weatherproof?
Yes — UV-stable PETG (not PLA), freeze-tolerant across normal North American climates. Apply a small bead of clear silicone along the top and side edges if needed (skip the bottom edge for drainage). Real-world installs at 4+ years and counting.
Can I get this in a brick-matching color?
Default ships in Black. For brick-matching prints (red, tan, or gray), use the Color Change Request product at checkout. Custom color adds 1-2 days to fulfillment.

✔ Replacement Guarantee — The Right Fit, Guaranteed

Send a picture of your install area BEFORE you order. We'll confirm the exact size that fits. If you order and it doesn't fit, we'll send the correct one at NO ADDITIONAL COST.

  • Before you order: Text or email pictures of (1) your install location and (2) your measurement. We'll confirm and send a direct link.
  • If the size is wrong: Send a picture showing the gap. We'll ship the correct size at no extra cost.
  • How to send pictures: Text or email 833-326-6868 / shop@doorbellmount.com. Send before purchase or immediately after (must arrive before we ship).

This guarantee covers fitment / depth issues only. We can't replace parts damaged during install or after install.

Need to Buy the Doorbell, Tools, or Caulk?

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you.

Questions? Need Help Confirming Fit?

Brick installs are tricky. Send pictures — we'll confirm the right size before you order:

Standard Color: Ships in Black. For brick-matching prints (red, tan, gray), use the Color Change Request.

Install Note: The base mounts into wood trim with #6 screws. The brick face is preserved — only the optional side anchor screw contacts the brick (and only when used).

3D-Printed Parts: Minor cosmetic variations or layer lines may be present and do not affect strength or weather resistance.

Order your Standard Offset Brick Extension for the Ring Video Doorbell Wired (formerly "Ring Wired 2021") today — clean brick install, free shipping over $100, Replacement Guarantee included.