Standard Offset Brick Extension for the eufy Video Doorbell S4 (3K, Wired, 2026) — Clear Storm Doors & Brick
Storm door swinging into your eufy Video Doorbell S4, or a brick return eating one side of its 180° × 180° view? This Standard Offset Brick Extension brings the doorbell forward and slightly sideways on a slim 9/16-inch base, cut to the exact depth you need — the usual fix for storm-door clearance or getting a panoramic camera out of a recessed entry.
The front of the extension carries our Eufy adapter bracket, confirmed to fit the S4. Select Eufy Video Doorbell S4 (2026) and your depth. The S4's doorbell wires run inside the extension.
Printed in the USA from weather-tough PETG, cut to your depth. Replacement Guarantee included; free shipping over $100. Doorbell specs at eufy.com.
eufy Option for This Standard Offset Extension
Choose Eufy Video Doorbell S4 (2026) in the Doorbell Model dropdown, then your depth.
- eufy Video Doorbell S4 (2026) — eufy's 3K panoramic doorbell: 9 MP (3072 × 3072) sensor with a true 180° × 180° head-to-toe view, OmniTrack AI tracking and auto-framing, radar plus dual PIR detection, color night vision and 24/7 recording. Wired-only (16-24V AC, 10-40 VA) with a built-in backup battery for outages. 4 GB local storage, expandable to 1 TB by SD card, no subscription required. Chime 2 included; works with Alexa, Google and Apple HomeKit (HomeKit needs a HomeBase 3). Wi-Fi 6, 2.4/5 GHz. Body about 6.57 × 2.0 × 1.52 inches (167 × 50.8 × 38.6 mm), 0.63 lb. Buy on Amazon → · Specs at eufy.com →
Good to know: The S4 mounts on our Eufy adapter bracket, the same bracket family that fits the E340, S330, C31, C30 and S220. Each of those models has its own listing in our Eufy doorbell mounts collection, so choose by the model you actually own and we print the right fit.
Not sure which eufy you have? Add a photo through the photo upload option on this listing and we confirm before anything ships.
CRITICAL: How to Measure for the Standard Offset Brick Extension
Brick extensions are custom-cut to your exact depth. Two ways to measure:
Method A — You HAVE your doorbell: The default 3-inch size fits most storm-door and standard 3-inch brick installs. Choose the size that matches your gap.
Method B — You DON'T have your doorbell yet: Choose the size matching the gap between your trim and where the doorbell needs to end up.
Want a second opinion? Add a photo and your measurement through the photo upload option on this listing and we'll confirm before shipping. Wrong size? We swap it free.
Standard Offset — forward and a little sideways. Best for storm-door clearance, a wider view, or getting out of a corner. For the most side clearance use the Full Offset; to sit flush with the brick use the Brick Face Extension.
Full walkthrough: How to Mount a Doorbell on Brick or Concrete. Wiring the S4: How to Install a Wired Doorbell.
Standard Offset Brick Extension Dimensions & Material
- Front Face: Eufy adapter bracket, fits the Video Doorbell S4
- Base Width: 9/16 inch (slim profile, fits standard wood trim)
- Depth: 52 sizes from 1/4 inch to 8 inches in 1/8-inch increments
- Pricing: Scales with depth from $40 up to $101
- Material: UV-stable PETG, 3D-printed in the USA, freeze-tolerant
- Hardware: 2× #6 base screws (wall mount) + the Eufy adapter bracket
Key Features & Benefits
- Storm Door Clearance: Moves the S4 forward so the door doesn't hit it.
- 52 Custom Depths: 1/4 inch to 8 inches in 1/8-inch increments.
- Eufy Bracket Included: Confirmed fit for the Video Doorbell S4.
- Slim 9/16" Base: Fits standard wood trim next to brick.
- Outdoor-Grade PETG: UV-stable, freeze-tolerant, 3D-printed in the USA.
Brick Extension Add-Ons
- Angled trim? Angle Shim Set 5/10/15° or 25/30/35° squares the extension to the brick.
- Gap beside the brick? Brick Side Shim & Stabilizer.
- Gap below the bracket? Brick Bottom Filler Plate.
- Wires come out the side? Add a Side Wire Entry.
- Color-matched hardware: Stainless screws in Black or White.
- Brick colors: Red, tan or gray prints are available in the color options on this page; Black is the default.
Installing Your Standard Offset Brick Extension on an eufy Video Doorbell S4
- Order the right version: Choose Eufy Video Doorbell S4 (2026) and your extension depth in the dropdowns.
- Remove the old doorbell: Power down at the breaker and disconnect both wires.
- Route the wires: Thread the doorbell wires through the back of the extension so they exit at the front face.
- Mount the extension base: Position the extension on the trim, check it with a level, and fasten with the included #6 wood screws (#2 Phillips). Pilot holes help in hardwood.
- Attach the bracket: Attach the Eufy bracket to the extension front using the small center screws. Use a #1 Phillips PRECISION driver.
- Wire and mount the doorbell: Connect the wires to the S4 terminals, then seat the doorbell on the bracket with the screws PROVIDED WITH THIS MOUNT.
- Finish up: Restore power and verify the camera view in the eufy app — with a 180° × 180° lens, a half-inch of extra depth can noticeably change how much brick shows at the edge.
Tools: #2 Phillips screwdriver, #1 Phillips PRECISION screwdriver, drill (optional pilot holes), level, and a multimeter to confirm 16-24V AC at the wires.
FAQ — Standard Offset Brick Extension for the eufy Video Doorbell S4
✔ Fit Guarantee — Every Order Photo-Reviewed
Attach photos of your eufy S4, trim and brick with the photo upload option on this listing. We review your photos before the extension ships to make sure the depth and bracket match your install. If something is still off, we replace it.
- Before it ships: Send photos of the trim, brick and doorbell through the photo upload option on this listing.
- Problems after install? Contact 1-833-326-6868, or email shop@doorbellmount.com.
Doorbell & Install Tool Links
eufy doorbell:
- eufy Video Doorbell S4 — 3K Wired Doorbell Cam with Chime 2 (2026) — ASIN B0GJ5TXQ1S on Amazon
- eufy Video Doorbell S4 product page and spec sheet at eufy.com
- Our S4 vs E340 write-up — what changed and why mounting position matters more on a 180° × 180° camera
Install tools & supplies:
- #1 Phillips PRECISION screwdriver — for the #4 bracket screws
- #2 Phillips screwdriver — for the #6 wall screws
- 16-24V AC doorbell transformer — the S4 wants 10-40 VA; upgrade if your old transformer is weak
Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you. These small commissions help fund development of new mounts and brackets.
Questions About Storm Door Clearance?
Upload photos with the photo upload option on this listing, or reach us directly:
- Email: shop@doorbellmount.com
- Text/Call: 1-833-326-6868
Color: Default color is Black. Use the color options on this page for brick colors and others.
eufy and Anker are trademarks of Anker Innovations Limited. DoorbellMount.com is an independent manufacturer and is not affiliated with or endorsed by Anker or eufy. The doorbell is not included.
Order your Standard Offset Brick Extension for the eufy Video Doorbell S4 today — storm-door clearance, custom depth, Eufy bracket included, photo-reviewed before shipping at DoorbellMount.com.

