Reolink
Narrow Full Offset Doorbell Brick Extension Mount |Reolink Doorbell Battery 2k |Full Offset away from Door
Narrow Full Offset Doorbell Brick Extension Mount |Reolink Doorbell Battery 2k |Full Offset away from Door
Fully Offset Reolink WIreless away from Door and extend past the brick
Couldn't load pickup availability
Reolink Wireless Doorbell Full Offset Brick Extension Mount | Maximum Door Clearance
Compatibility: Reolink Wireless Doorbell ONLY
- Fits ONLY: The Reolink Wireless Doorbell (WITH BATTERY - Battery unit is bigger than WIRED ONLY unit) model pictured below.
- Intended Use: Mounting on trim/surface recessed behind brickwork to bring the doorbell forward AND shift it sideways with MAXIMUM offset over the brick face (ideal for tight clearances near door swings).
- WILL NOT FIT: Reolink Wired models, or doorbells from other brands.
Please ensure you have the correct Reolink doorbell model before ordering:
(Example image - click for Amazon link. As an Amazon Associate, I earn from qualifying purchases.)
Mount Your Reolink Past Brick with Maximum Sideways Offset!
Is your Reolink Wireless Doorbell mounting spot recessed behind brick? Is your door swing extremely close, requiring maximum clearance? This **Full Offset Brick Extension Mount** is specifically designed for these challenging situations!
It extends your Reolink doorbell forward to clear the brick face AND utilizes a **Full Offset** design to shift the doorbell as far sideways as possible over the brick, maximizing space between the doorbell and your door frame/swing path. All without drilling into your brick!
How it Works: Full Offset vs. Standard Offset
This mount features our FULL OFFSET bracket. Unlike standard offset mounts where the doorbell might slightly overhang the base edge near the door, the Full Offset aligns the door-side edge of your Reolink doorbell flush with the door-side edge of the mount base itself. This pushes the entire doorbell further sideways over the brick, providing the maximum possible clearance.
Choose this FULL OFFSET version if clearance from your door swing is critical. If you only need a standard offset, please see our other "Offset Brick Extension" listings. This mount positions the doorbell over or in front of the brick face, not flush with it.
Base Dimensions & Mounting: The mounting base is 9/16 inches wide, fitting most narrow trim areas. Standard mounting hole spacing on the base is 2.5 inches (center-to-center). Ensure adequate flat mounting surface on trim for mounting.
Angled Trim? If your mounting trim surface is angled and not perpendicular to the wall, add our Angle Shims (5°, 10°, 15° Options) to your order for a perfect vertical installation.
CRITICAL: Measure for Your OFFSET Extension Length!
Choosing the correct extension length ensures the mount clears your brickwork, allowing the offset bracket to properly position your doorbell over the brick face. Please measure carefully:
- Measure the exact distance straight out from the surface where the mount base will attach (usually your recessed trim) to the outermost face of your brick.
- Order THIS measurement as your required Extension Length. (Do NOT subtract doorbell thickness for this Offset mount type).
This length ensures the extension arm reaches the brick face, allowing the full offset bracket to position your doorbell correctly over the brick.
Select the required extension length from the dropdown menu when ordering. We offer various lengths (e.g., starting from 1/4 inch) to suit your needs.
Need help measuring? Text or email us a picture of your setup! (Contact info below)
Key Features & Benefits:
- Maximum Sideways Offset: "Full Offset" design provides the most clearance from door swings.
- "Over Brick" Placement: Extends doorbell forward past brick and positions it over the brick face.
- Designed for Reolink Wireless: Ensures compatibility with the specific Reolink Wireless Doorbell.
- Avoid Drilling Brick: Mounts to existing trim behind brickwork (Std. 2.5" hole spacing).
- Custom Extension Lengths: Order the precise depth needed based on your trim-to-brick-face measurement (min 1/4 inch).
- Narrow Base (9/16"): Fits most standard trim widths.
- Angle Shim Compatible: Works with our add-on shims for angled trim (sold separately).
- Clean Installation: Internal channel allows routing wires if needed.
- Durable PETG Construction: Strong, weather-resistant plastic for outdoor use.
Why Choose the Full Offset Brick Extension?
This extension for the Reolink Wireless Doorbell is the ideal solution when mounting near brick or uneven surfaces, especially when maximum clearance from a nearby door is required. The full offset ensures the camera captures clearer angles without obstruction while maximizing space.
Easy Installation and Durability
Installation is user-friendly – mount the base, select your measured extension length, and attach your Reolink doorbell. No advanced tools needed! Built with high-quality PETG, it resists wear and weather, ensuring reliable security at your doorstep.
Questions About Compatibility, Measuring, or Installation?
Need help measuring the extension length? Wondering if the Full Offset is right for you, or about angled trim? Send us a picture of your doorbell and mounting area!
- Email: shop@doorbellmount.com
- Text/Call: 1-833-326-6868
Standard Color: Black. Need a different color? Please purchase the separate "Color Change Request" listing along with this mount.
About 3D Printed Quality: This mount is produced using 3D printing (PETG), resulting in a strong, functional part ideal for outdoor use. Minor cosmetic variations or layer lines may be visible but do not affect durability or function. Your satisfaction is guaranteed – please reach out with any quality concerns before leaving a review!
Order your Full Offset Brick Extension Mount for the Reolink Wireless Doorbell today for maximum clearance! Remember to measure carefully (Trim to Brick Face!) and select your required extension length. Add Angle Shims if your trim is angled!
