15-90° Adjustable Swivel Mount for Ubiquiti UniFi G4 Doorbell Pro | 5MP + 8MP Package Cam Touchscreen PoE | Cat-5e Pass-Through Pivot

$50.00
$40.00
15-90° Side-Wall Pivot Mount for the UniFi G4 Doorbell Pro — 5MP + 8MP Package Cam Touchscreen, PoE Built for the Ubiquiti UniFi G4 Doorbell Pro (UVC-G4-Doorbell-Pro) — the UniFi flagship with dual cameras (5MP visitor + 8MP package), 1.8"...
Availability: Many In Stock
Product Type: Adjustable Mount 15-90°

15-90° Side-Wall Pivot Mount for the UniFi G4 Doorbell Pro — 5MP + 8MP Package Cam Touchscreen, PoE

Built for the Ubiquiti UniFi G4 Doorbell Pro (UVC-G4-Doorbell-Pro) — the UniFi flagship with dual cameras (5MP visitor + 8MP package), 1.8" front touchscreen, 138° H FOV, PoE or 16-24V AC, IPX4. The bent-neck 15-90° pivot tilts the body perpendicular to the wall on side-wall installs. Sold via Ubiquiti Store.

Custom-Fit for the UniFi G4 Doorbell Pro

  • Specifically for UniFi G4 Doorbell Pro — Ubiquiti product code UVC-G4-Doorbell-Pro. Dual cam (5MP + 8MP package), 1.8" touchscreen, 138° H FOV, 160.6×51.7×28.7mm, PoE 802.3af or 16-24V AC, IPX4. Sold via Ubiquiti Store, not typically on Amazon.
  • Body-shared note: The G4 Doorbell Pro and G4 Doorbell Pro PoE Kit share the SAME body. The PoE Kit just bundles a PoE adapter + Chime Pro — we offer separate listings for SEO, but the bracket is interchangeable.
  • Does NOT fit: Original G4 Doorbell (UVC-G4-Doorbell, slimmer body), G6 Entry, G6 Pro Entry, or Doorbell Lite — each has its own listing.
Don't have it yet? Search the UniFi G4 Doorbell Pro on Amazon →

Dual Cam + Touchscreen + Side-Wall Aim

The G4 Doorbell Pro is the UniFi flagship: dual cameras (5MP for visitors, 8MP downward for packages) and a front touchscreen for visitor messages. The 15-90° bent-neck pivot aims both cameras perpendicular to the wall on side-wall installs — visitor cam catches faces, package cam catches the doormat.

Wide Dual-Axis Control (15-90°)

Bent-neck swivel joint — precise aiming across 15° to 90°. Locking set screws hold position permanently.

15-90 degree adjustability diagram for UniFi G4 Doorbell Pro

Need a smaller adjustment? 0-35° Mount for UniFi G4 Doorbell Pro.

Mount Dimensions & Weight

  • Base Width: 1.8"
  • Base Height: 3.1"
  • Hole Spacing: 2-5/8"
  • Wall Extension at 15°: ~2.0"
  • Wall Extension at 90°: ~3.5"
  • Weight: ~2 oz

Key Features & Benefits

  • Custom-Fit for the G4 Doorbell Pro Body (160.6mm).
  • Wide 15-90° Pivot Range.
  • RJ45 Pass-Through — terminated CAT5e/CAT6 fits with connector attached.
  • Also Works for 16-24V AC.
  • Two-Axis Set-Screw Lock.
  • Touchscreen Stays Visible — bracket geometry doesn't cover the front display.
  • Outdoor PETG — matches IPX4.
  • Universal Base.

Customization & Add-On Options

Installing on the UniFi G4 Doorbell Pro

  1. Tools & Prep: Drill, PH2/PH1 Philips, anchors, level. RJ45 crimper or pre-terminated CAT5e/CAT6.
  2. Pull Cable: CAT5e/CAT6 to PoE switch (or 16-24V AC wires).
  3. Adopt to UniFi Protect: Adopt doorbell to UniFi Protect (NVR/Cloud Key/UDM-Pro). Verify Live View before mounting.
  4. Plan Aim Angle: Side-wall = 60-90° pivot. Touchscreen needs to remain unobstructed.
  5. Mount the Base: Pull cable through, vertically, #6 screws.
  6. Attach Bent-Neck Swivel: Route cable, four #4 / PH1 screws.
  7. Set Initial Angle: Adjust through 15-90°.
  8. Connect & Mount Doorbell: Plug RJ45. Use screws PROVIDED WITH THIS MOUNT (preinstalled). Do NOT use UniFi stock plate.
  9. Aim & Lock: UniFi Protect Live View, tilt/pan until both cameras frame correctly. Tighten set screws.

FAQ

Compatible with UniFi G4 Doorbell Pro?
Yes — UVC-G4-Doorbell-Pro. Same body fits the PoE Kit variant. Will not fit other UniFi doorbells.
15-90° vs 0-35°?
15-90° for side-wall correction.
Touchscreen visible?
Yes — bracket geometry doesn't cover the front display.
PoE or 16-24V AC?
Both work. RJ45 pass-through accepts terminated cable; same hole takes low-voltage wires.
Vinyl, Hardie, brick, or stucco?
Yes. Pair with siding adapters or use masonry anchors.
Weatherproof?
Yes. UV-stable PETG, freeze-tolerant. Matches IPX4.
Hold for years?
Yes. Set-screw lock rated for years.

✔ Replacement Guarantee — The Right Part, Guaranteed

Send a picture of your install area and your doorbell BEFORE you order. We'll send you the exact link to what you need. If you order and it doesn't fit, we'll send the correct part at NO ADDITIONAL COST.

Need to Buy Your Doorbell?

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases. UniFi doorbells are typically sold via the Ubiquiti Store (non-affiliate link).

Questions?

Standard Color: Black or White. Color Change Request.

Angle Note: 15-90° is approximate.

3D-Printed: Minor variations possible. Made-to-order USA.

Order your 15-90° mount for the UniFi G4 Doorbell Pro today.