15-90° Adjustable Swivel Mount for Philips Hue Secure Wired Video Doorbell | 2K 1:1 Head-to-Toe | Hue Bridge Integration

$50.00
$40.00
15-90° Side-Wall Pivot Mount for the Philips Hue Secure Wired Video Doorbell — 2K Head-to-Toe with Hue Bridge Lighting Triggers Built for the Philips Hue Secure Wired Video Doorbell — 2K head-to-toe doorbell with 1:1 aspect ratio, >180° FOV, IP54,...
Availability: Many In Stock
Product Type: Adjustable Mount 15-90°

15-90° Side-Wall Pivot Mount for the Philips Hue Secure Wired Video Doorbell — 2K Head-to-Toe with Hue Bridge Lighting Triggers

Built for the Philips Hue Secure Wired Video Doorbell — 2K head-to-toe doorbell with 1:1 aspect ratio, >180° FOV, IP54, and Hue Bridge integration (motion can trigger Hue lighting scenes). Requires existing 12-24V AC + 2.4GHz Wi-Fi.

Custom-Fit for the Philips Hue Secure Doorbell

  • Specifically for Philips Hue Secure Wired Video Doorbell — ASIN B0FP44Y4FB. 2K QHD 1984×1984, 1:1 head-to-toe, >180° FOV, IP54, requires 12-24V AC + 2.4GHz Wi-Fi.
  • Does NOT fit: any non-Hue doorbell. Hue only makes one doorbell.
  • Hue Bridge note: Doorbell + camera work standalone via Hue app; lighting automations require Hue Bridge.
Don't have it yet? Get the Philips Hue Secure Doorbell on Amazon →

Hue Lighting Automations + 1:1 Head-to-Toe Aim

Visitor walks up, motion triggers porch Hue lights to a scene, doorbell records 2K head-to-toe. The 15-90° bent-neck pivot aims the 1:1 head-to-toe frame at the actual porch on side-wall installs.

Wide Dual-Axis Control (15-90°)

Bent-neck swivel joint — precise aiming across 15° to 90°. Locking set screws hold position permanently.

15-90 degree adjustability diagram for Philips Hue Secure

Need a smaller adjustment? 0-35° Mount for Hue Secure.

Mount Dimensions & Weight

  • Base Width: 1.8"
  • Base Height: 3.1"
  • Hole Spacing: 2-5/8"
  • Wall Extension at 15°: ~2.0"
  • Wall Extension at 90°: ~3.5"
  • Weight: ~2 oz

Key Features & Benefits

  • Custom-Fit for the Hue Secure Body.
  • Wide 15-90° Pivot Range.
  • 1:1 Head-to-Toe Friendly.
  • Two-Axis Set-Screw Lock.
  • Wire Pass-Through — routes 12-24V AC chime wires.
  • Hue Bridge Integration Friendly.
  • Outdoor PETG — matches IP54.
  • Universal Base.

Customization & Add-On Options

Installing on the Hue Secure Doorbell

  1. Tools & Prep: Drill, PH2/PH1 Philips, anchors, level, multimeter.
  2. Power Down: Breaker OFF at chime circuit. Verify dead.
  3. Pair via Hue App First: Add doorbell. Pair to Hue Bridge for lighting automations.
  4. Plan Aim Angle: 1:1 head-to-toe: TOP on faces, BOTTOM on doormat. Side-wall = 60-90°.
  5. Mount the Base: Pull wires through, vertically, #6 screws.
  6. Attach Bent-Neck Swivel: Route wires, four #4 / PH1 screws.
  7. Set Initial Angle: Adjust through 15-90°.
  8. Connect & Mount Doorbell: 12-24V wires. Use screws PROVIDED WITH THIS MOUNT (preinstalled). Do NOT use Hue stock plate.
  9. Aim & Lock: Restore power. Hue app Live View, tilt/pan, tighten set screws.
  10. Test Hue Automations: Walk up, verify motion-trigger lights work.

FAQ

Compatible with Hue Secure?
Yes — B0FP44Y4FB only.
15-90° vs 0-35°?
15-90° for side-wall correction.
Need a Hue Bridge?
Not for basics. Required for lighting automations (motion → Hue scenes).
Does mount support motion-trigger lighting?
Yes — bracket is passive, motion detection fires on actual visitors with correct aim.
Vinyl, Hardie, brick, or stucco?
Yes. Pair with siding adapters or use masonry anchors.
Weatherproof?
Yes. UV-stable PETG, freeze-tolerant. Matches IP54.
Hold for years?
Yes. Set-screw lock rated for years.

✔ Replacement Guarantee — The Right Part, Guaranteed

Send a picture of your install area and your doorbell BEFORE you order. We'll send you the exact link to what you need. If you order and it doesn't fit, we'll send the correct part at NO ADDITIONAL COST.

Need to Buy Your Doorbell?

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases.

Questions?

Standard Color: Black or White. Color Change Request.

Angle Note: 15-90° is approximate.

3D-Printed: Minor variations possible. Made-to-order USA.

Pick up the right 15-90° mount for your Philips Hue Secure doorbell — lock the 1:1 head-to-toe aim, keep Hue lighting automations precise.