15-90° Adjustable Swivel Mount for Lorex 2K Wired Smart Video Doorbell | Angle Tilt & Pivot

$50.00
$40.00
15-90° Side-Wall Pivot Mount for the Lorex 2K Wired Smart Video Doorbell — 4:3 164° with Integrated LED Smart Lighting Built for the Lorex 2K Wired Smart Video Doorbell — 2K wired doorbell with 4:3 aspect, 164° FOV, integrated LED...
Availability: Many In Stock
Product Type: Adjustable Mount 15-90°

15-90° Side-Wall Pivot Mount for the Lorex 2K Wired Smart Video Doorbell — 4:3 164° with Integrated LED Smart Lighting

Built for the Lorex 2K Wired Smart Video Doorbell — 2K wired doorbell with 4:3 aspect, 164° FOV, integrated LED security lighting, no-subscription local recording. The bent-neck 15-90° pivot tilts the body perpendicular to the wall on side-wall installs.

Custom-Fit for the Lorex 2K Wired Doorbell

  • Specifically for Lorex 2K Wired — ASIN B08PPSRKML (or B09B4D42JY black w/ 32GB microSD pre-installed). 2K, 4:3 aspect, 164° FOV, integrated LED security lighting, 16-24V AC or 12-24V DC, microSD, no monthly fee.
  • Does NOT fit: Lorex 2K Wireless Battery (B09VTM87LW, has battery compartment), Lorex 4K Wired (B0CPQ3HXLT, 9:16 portrait body), or older 1080p Lorex (legacy).
  • Quick Lorex ID: 2K Wired has 4:3 aspect with integrated LED light strip and screw terminals only (no battery).
Don't have it yet?   Get it on AMAZON

Smart Lighting + Side-Wall Aim

The Lorex 2K Wired's killer feature is the integrated LED security lighting that activates with motion. The 15-90° bent-neck pivot aims both the camera and the LED strip perpendicular to the wall on side-wall installs — lights deter where visitors actually approach.

Wide Dual-Axis Control (15-90°)

Bent-neck swivel joint — precise aiming across 15° to 90°. Locking set screws hold position permanently.

15-90 degree adjustability diagram for Lorex 2K Wired

Need a smaller adjustment? 0-35° Mount for Lorex 2K Wired.

Mount Dimensions & Weight

  • Base Width: 1.8"
  • Base Height: 3.1"
  • Hole Spacing: 2-5/8"
  • Wall Extension at 15°: ~2.0"
  • Wall Extension at 90°: ~3.5"
  • Weight: ~2 oz

Key Features & Benefits

  • Custom-Fit for the Lorex 2K Wired Body.
  • Wide 15-90° Pivot Range.
  • Smart Lighting Friendly — bracket doesn't shadow the LED strip.
  • Two-Axis Set-Screw Lock.
  • Wire Pass-Through — routes 16-24V AC or 12-24V DC.
  • microSD Slot Stays Reachable.
  • Outdoor PETG.
  • Universal Base.

Customization & Add-On Options

Installing on the Lorex 2K Wired

  1. Tools & Prep: Drill, PH2/PH1 Philips, anchors, level, multimeter.
  2. Power Down: Breaker OFF. Verify dead with tester.
  3. Pair via Lorex App: Add doorbell to Lorex Home / Lorex Cloud app.
  4. Plan Aim Angle: Side-wall = 60-90° pivot.
  5. Mount the Base: Pull wires through, vertically, #6 screws.
  6. Attach Bent-Neck Swivel: Route wires, four #4 / PH1 screws.
  7. Set Initial Angle: Adjust through 15-90°.
  8. Connect & Mount Doorbell: Connect 16-24V wires. Use screws PROVIDED WITH THIS MOUNT (preinstalled). Do NOT use Lorex stock plate.
  9. Aim & Lock: Restore power. Live View, tilt/pan, tighten set screws.
  10. Test Smart Lighting: Walk-test motion-trigger LED activation.

FAQ

Compatible with Lorex 2K Wired?
Yes — B08PPSRKML or B09B4D42JY (same body). Will not fit Lorex 2K Battery, Lorex 4K, or older 1080p.
15-90° vs 0-35°?
15-90° for side-wall correction.
Smart lighting still works?
Yes — bracket doesn't shadow the LED strip.
microSD accessible?
Yes — rear slot stays reachable.
Vinyl, Hardie, brick, or stucco?
Yes. Pair with siding adapters or use masonry anchors.
Weatherproof?
Yes. UV-stable PETG, freeze-tolerant.
Hold for years?
Yes. Set-screw lock rated for years.

✔ Replacement Guarantee — The Right Part, Guaranteed

Send a picture of your install area and your doorbell BEFORE you order. We'll send you the exact link to what you need. If you order and it doesn't fit, we'll send the correct part at NO ADDITIONAL COST.

Need to Buy Your Doorbell?

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases.

Questions?

Standard Color: Black or White. Color Change Request.

Angle Note: 15-90° is approximate.

3D-Printed: Minor variations possible. Made-to-order USA.

Order your 15-90° mount for the Lorex 2K Wired today.