15-90° Adjustable Swivel Mount for Aqara Doorbell Hub G410 | 2K Matter+Thread+Zigbee mmWave Radar | Adjustable Wide-Arc Bracket

$50.00
$40.00
15-90° Side-Wall Pivot Mount for the Aqara Doorbell Hub G410 — Matter + Thread + Zigbee Hub with mmWave Radar Built for the Aqara Doorbell Camera Hub G410 — the 2K doorbell that's also a Matter Controller + Thread Border...
Availability: Many In Stock
Product Type: Adjustable Mount 15-90°

15-90° Side-Wall Pivot Mount for the Aqara Doorbell Hub G410 — Matter + Thread + Zigbee Hub with mmWave Radar

Built for the Aqara Doorbell Camera Hub G410 — the 2K doorbell that's also a Matter Controller + Thread Border Router + Zigbee 3.0 hub with mmWave radar. The bent-neck 15-90° pivot tilts the body perpendicular to the wall on side-wall installs.

Custom-Fit for the Aqara G410

  • Specifically for Aqara Doorbell Camera Hub G410 — ASIN B0F6CJF9M9. 2K, 175° FOV, AA battery or wired, mmWave radar, Matter Controller + Thread Border Router + Zigbee 3.0 hub.
  • Does NOT fit: Aqara G4 (B0BPHTL7MG) or G400 (B0G52BVRLQ).
  • Quick Aqara ID: G410 doubles as a smart-home hub — if your box advertises Matter+Thread+Zigbee, this is it.
Don't have it yet? Get the Aqara G410 on Amazon →

Smart-Home Hub + Doorbell + Side-Wall Aim

The G410 is unique — doorbell + Matter/Thread/Zigbee hub in one body, with mmWave radar for accurate motion detection. The 15-90° bent-neck pivot aims the radar field correctly at the porch on side-wall installs.

Wide Dual-Axis Control (15-90°)

Bent-neck swivel joint — precise aiming across 15° to 90°. Locking set screws hold position permanently.

15-90 degree adjustability diagram for Aqara G410

Need a smaller adjustment? 0-35° Mount for Aqara G410.

Mount Dimensions & Weight

  • Base Width: 1.8"
  • Base Height: 3.1"
  • Hole Spacing: 2-5/8"
  • Wall Extension at 15°: ~2.0"
  • Wall Extension at 90°: ~3.5"
  • Weight: ~2 oz

Key Features & Benefits

  • Custom-Fit for the Aqara G410 Body.
  • Wide 15-90° Pivot Range.
  • mmWave Radar Friendly — perpendicular aim points radar at the porch path.
  • Two-Axis Set-Screw Lock.
  • Battery Door Stays Accessible — for AA swap.
  • Matter+Thread+Zigbee Hub Functions Unaffected — mount is passive.
  • Outdoor PETG — UV-stable.
  • Universal Base.

Customization & Add-On Options

Installing on the Aqara G410

  1. Tools & Prep: Drill, PH2/PH1 Philips, anchors, level. AA batteries or wired power.
  2. Pair via Aqara Home App: Set up Matter Controller + Thread Border Router + Zigbee hub functions before mounting.
  3. Plan Aim Angle: mmWave radar detects motion direction. Aim at porch path. Side-wall = 60-90° pivot.
  4. Mount the Base: Vertically, #6 screws.
  5. Attach Bent-Neck Swivel: Four #4 / PH1 screws.
  6. Set Initial Angle: Adjust through 15-90°.
  7. Snap Doorbell In: Use screws PROVIDED WITH THIS MOUNT (preinstalled). Do NOT use Aqara stock plate.
  8. Aim & Lock: Live View, tilt/pan, walk-test radar triggers, tighten set screws.

FAQ

Compatible with Aqara G410?
Yes — B0F6CJF9M9 only. Will not fit G4 or G400.
15-90° vs 0-35°?
15-90° for side-wall correction.
Hub functions still work?
Yes — mount is passive. Matter/Thread/Zigbee unaffected.
mmWave radar properly aimed?
Yes — perpendicular aim points the radar at the porch path.
Vinyl, Hardie, brick, or stucco?
Yes. Pair with siding adapters or use masonry anchors.
Weatherproof?
Yes. UV-stable PETG, freeze-tolerant.
Hold for years?
Yes. Set-screw lock rated for years.

✔ Replacement Guarantee — The Right Part, Guaranteed

Send a picture of your install area and your doorbell BEFORE you order. We'll send you the exact link to what you need. If you order and it doesn't fit, we'll send the correct part at NO ADDITIONAL COST.

Need to Buy Your Doorbell?

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases.

Questions?

Standard Color: Black or White. Color Change Request.

Angle Note: 15-90° is approximate.

3D-Printed: Minor variations possible. Made-to-order USA.

Order your 15-90° mount for the Aqara G410 today.