Fixed 45° Corner Doorbell Mount (3/4" Narrow Base) | Universal Fit Mount (select model)

$35.00
$32.50
Wide Angle Corner Mount (45°) for Video Doorbells | Narrow 3/4" Base Slim Fit for Corners! Please Select Your Doorbell Model. This fixed corner bracket provides a **45-degree outward angle** and uses our **ultra-slim 3/4-inch base** to fit into confined...
Availability: Many In Stock
Product Type: Corner Mount

Wide Angle Corner Mount (45°) for Video Doorbells | Narrow 3/4" Base

Slim Fit for Corners! Please Select Your Doorbell Model.

This fixed corner bracket provides a **45-degree outward angle** and uses our **ultra-slim 3/4-inch base** to fit into confined spaces where standard mounts won't work.

  • CRITICAL: Choose Your Doorbell Model from the dropdown list to ensure you receive the correctly drilled top adapter bracket for a secure fit.
  • Sizing for Doorbells:
    • Perfect for doorbells **under 2 inches wide** (like SimpliSafe, Blink, Nest Hello, Ring Pro/Wired) when installed right in the corner.
    • Wider doorbells (~2.5", e.g., Ring Battery models) will require installing the mount slightly **away from the corner vertex** (typically 1/4" to 3/4") to avoid overhang.
  • FITMENT WARNING: The 45° angle projects the doorbell outward. If your trim is very narrow and next to an opening door, check clearances carefully. Send pictures for a fit check if unsure!

Capture Wider Views from Tight Corner Spaces!

Facing a tricky installation in a corner or on super-narrow trim (at least 3/4" wide)? Need a significant **45-degree outward angle** to cover the approach to your door? This **Fixed 45° Corner Mount** is specifically engineered for these situations.

Its slim 3/4" base maximizes placement options, while the fixed 45° angle ensures your camera gets a broad view down the wall or pathway. It also positions the doorbell about 1" forward from the corner point, helping clear some obstructions like thick trim or storm door frames.

Mount Geometry & Fit Details

  • Fixed Outward Angle: 45 degrees horizontal.
  • Approx. Forward Extension: Positions doorbell mounting surface ~1 inch out from the corner vertex.
  • Base Footprint Width: 3/4 inches (fits surfaces >= 3/4" wide).
  • Base Footprint Length: Approx. 2.5 inches.
  • Mounting Hole Spacing (Base): Standard **2 inches** (center-to-center). (Use our Custom Hole Spacing add-on if needed).
  • Design Offset: Mount center is offset ~0.854" from corner vertex (fits doorbells up to ~2" wide when flush in corner; wider units require mount offset).

Product Specifications & Advantages:

  • 45° Fixed Angle View: Ideal for wide surveillance from corner locations.
  • Optimized Corner Design: Helps position doorbell effectively near storm doors.
  • Ultra-Slim 3/4" Base: Fits 98% of tight corner/trim scenarios.
  • Standard 2" Mounting Holes: Matches many existing doorbell installations (customizable).
  • Model-Specific Top Bracket: Select your doorbell for a guaranteed fit to the mount.
  • Integrated Wire Channel: Allows clean routing for wired doorbells.
  • All-Weather PETG Build: Outdoor-rated, impact-resistant, and UV stable.
  • Included Hardware: Comes with screws for attaching the top bracket to the base.
  • Modular System Potential: Top bracket can be replaced for future doorbell changes (see adapter plates).

Setting Up Your 45° Corner Mount

  1. Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed), selected doorbell & its hardware.
    Turn OFF power at the breaker if hardwiring!
  2. Position & Mount Angled Base: Place the **45° Corner Base** into the corner (offset slightly if needed for wider doorbells), ensuring the angle points correctly. Mark/drill pilot holes. Secure base to **one side** of corner trim/wall using appropriate screws (#6 likely, use PH2) and anchors via the 2" spaced holes.
    Ensure base is level vertically. Check door swing clearance BEFORE final tightening. Do NOT overtighten.
  3. Attach Doorbell Adapter Bracket: Route wires through the **Doorbell Adapter Bracket** (for your selected model). Align onto the angled face of the Corner Base. Attach using small screws provided (likely **#4 / PH1 driver**).
    Tighten snugly until flush. Clear debris from pilot holes if needed.
  4. Wire Doorbell: Connect wires per manufacturer's instructions. Tuck excess wire.
  5. Attach Doorbell to Adapter Bracket:
    • Align doorbell (or its backplate) with holes on the custom Adapter Bracket.
    • Secure using screws PROVIDED WITH THIS MOUNT (typically #4 / PH1).
    • DO NOT USE doorbell's wall screws for this attachment.
    • Replace doorbell cover/faceplate if applicable.
    Use correct PH1 driver. Tighten gently.
  6. Final Check & Power On: Ensure doorbell is secure & check door clearance. Turn power on & test.

Follow safety rules & doorbell guidelines. Use appropriate anchors. ~1" extension from corner is standard; contact for custom lengths.

Space-Efficient Design for Corner Applications

This doorbell mount is strategically designed to fit snugly in tight corner spaces, such as beside storm doors. The 45º outward angle allows for effective placement even when space is limited, ensuring your doorbell is accessible and provides excellent viewing coverage.

Robust Construction for Outdoor Use

Built to last from durable PETG, this Corner Doorbell Mount resists the elements. Trust this mount to keep your doorbell secure and functional year-round, regardless of weather conditions. Installation is designed to be straightforward.

Simple Setup & Versatile Compatibility

Installing the Corner Mount is user-friendly. It adapts seamlessly to provide a stable attachment point for many doorbell models (when selected), enhancing your home's features without hassle.

Optional Add-ons & Customizations:

Need adjustments? Explore these options:

  • Color Change Request Add-on
    Custom Color

    Standard Black (SimpliSafe/Wyze default White). Choose White, Brown, Grey, etc. via this add-on ($2-$5 charge).

    • Product Visualization

    Image of the 45-Degree Corner Mount Base:

    45 Degree Fixed Corner Doorbell Mount

    Installation Help or Custom Requests?

    Confirm fit before ordering! Especially important for corners and wider doorbells. Send us pictures of your doorbell and where you plan to mount it.

    Color: Default is Black (except SimpliSafe/Wyze default to White). Add the Color Change Request item for other colors.

    Doorbell Not Included. Kit contains the 45° corner mount base, model-specific top adapter bracket, and assembly screws.

    Material & Quality: Printed with robust, outdoor-rated PETG. Minor visual imperfections typical of 3D printing may be present but won't affect durability. We guarantee quality - contact us if unsatisfied!

    Get the wide-angle view from tight corners! Order your 45° Fixed Corner Mount now - select your doorbell model carefully!