• 15º Offset Corner Trim Doorbell Mount 1.6in Width Doorbell or Less for Brick Storm Door Area - DoorbellMount.Com
  • 15º Offset Corner Trim Doorbell Mount 1.6in Width Doorbell or Less for Brick Storm Door Area - DoorbellMount.Com
1 2

Corner Mount

15º Offset Corner Trim Doorbell Mount for Ring Doorbell Mounting Bracket and other Brands

15º Offset Corner Trim Doorbell Mount for Ring Doorbell Mounting Bracket and other Brands

Corner Angle for Door Trim Area for Video Doorbells

$32.50 USD
$35.00 USD $32.50 USD
Sale Sold out
Shipping calculated at checkout.

Fixed Corner Doorbell Mount (15° Angle, 1" Extension) | Select Your Model

Designed for Corners & Narrow Trim! Select Your Doorbell Model.

This mount provides a fixed **15-degree angle** and extends your doorbell approximately **1 inch out from the corner**. Its **narrow 3/4-inch base** is ideal for tight corner installations or slim door trim.

  • CRITICAL: You MUST Select Your Specific Doorbell Model from the options list to receive the correct custom-fitted top adapter bracket.
  • Sizing for Doorbells:
    • Designed for doorbells up to approx. 2 inches wide (e.g., Ring Pro/Wired, Blink, Logitech, SimpliSafe, Google Nest Hello) when mounted flush in a 90° corner. (The center of the top bracket is offset approx. 0.854" from the corner vertex).
    • Wider doorbells (like Ring Battery models, approx. 2.5" wide) will require this mount to be installed slightly offset from the absolute corner (e.g., 1/4" to 3/4" away from the corner edge, depending on doorbell width) to fit without overhang into the walkway.
  • WARNING: If your trim is very narrow and close to a door swing, part of the doorbell may enter the walkway or be hit by the door. Please send pictures of your mounting area for a fit assessment BEFORE ordering if unsure.

Enhance Your Home with the Perfect Corner View

Is your best doorbell mounting spot right in a corner, or on very narrow trim where standard mounts won't fit? This **Fixed Corner Doorbell Mount** is your solution! It's engineered to fit snugly into these challenging spaces, providing a stable platform that angles your doorbell **15 degrees outward** and positions it about **1 inch forward from the corner vertex**.

This ensures your camera captures the approach to your door effectively, improving visibility and security, especially useful for clearing storm door frames or achieving a better line of sight when space is limited.

Mount Specifications

  • Fixed Angle: Provides a **15-degree horizontal angle** (angled outward from the corner).
  • Extension from Corner: Positions doorbell approx. **1 inch forward** from the corner point (where the two walls would meet).
  • Base Wall Footprint Width: 3/4 inches.
  • Base Wall Footprint Length: Approx. 2.5 inches.
  • Base Mounting Hole Spacing: Standard **2 inches** (center-to-center). Customizable via add-on service (see below).
  • Max Doorbell Width (in true corner): Designed with a ~0.854" offset from mount center to corner vertex, ideal for doorbells up to ~2" wide when installed flush in a 90° corner. Wider doorbells will need the mount installed slightly offset from the corner.

Key Features & Benefits:

  • 15° Fixed Outward Angle: Ideal for corner installations to direct view towards approach.
  • ~1" Extension from Corner: Brings doorbell forward for better visibility & storm door clearance.
  • Narrow 3/4" Base: Fits most tight corners and slim door trim (fits 98% of areas).
  • Standard 2" Hole Spacing: Often matches existing doorbell button holes (customizable).
  • Requires Doorbell Model Selection: Get the correct pre-drilled top adapter bracket for your specific doorbell.
  • Clean Wire Passthrough: Wires run neatly through the inside of the mount.
  • Durable PETG Construction: Weather-resistant, superior to PLA for outdoor use.
  • Includes All Necessary Screws: For mount assembly and attaching your doorbell adapter.
  • Future-Proof System: Top adapter bracket is replaceable for future doorbell upgrades (available here).

Installing Your Fixed Corner Mount

  1. Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed), selected doorbell model & its specific backplate/screws if required by doorbell.
    Turn OFF power at the breaker if hardwiring!
  2. Position & Mount Angled Base: Place the **15° Angled Corner Base** snugly into the corner, ensuring the angle directs the doorbell as desired. Mark and drill pilot holes if needed. Secure the base to **one side** of the corner trim/wall using appropriate screws (#6 size likely, use PH2) and anchors through the 2" spaced holes.
    Ensure base is level vertically. Do NOT overtighten screws into wall/trim.
  3. Attach Doorbell Adapter Bracket: Route wires through the **Doorbell Adapter Bracket** (this piece is specific to your selected doorbell model). Align this bracket onto the angled face of the mounted Corner Base. Attach using the small screws provided (likely #4 screws / PH1 driver).
    Tighten screws snugly until bracket is flush and secure against the angled base.
  4. Wire Doorbell: Connect wires to your video doorbell per its manufacturer's instructions. Tuck excess wire into the mount's cavity or wall.
  5. Attach Doorbell to Adapter Bracket:
    • Align your doorbell (or its specific backplate, if it uses one and our adapter is designed for it) with the pre-drilled holes on the custom Doorbell Adapter Bracket.
    • Secure the doorbell/plate using the small screws PROVIDED WITH THIS MOUNT (typically #4 / PH1 driver).
    • DO NOT USE screws that came with your doorbell for THIS step unless specifically for attaching to its own plate which is then attached to our bracket.
    • Replace your doorbell's cover/faceplate if applicable.
    Use correct PH1 driver for provided screws. Tighten gently to avoid stripping.
  6. Final Check & Power On: Ensure doorbell is securely mounted. Turn power back on (if applicable) and test.

Follow safety rules & your doorbell's specific guidelines. Use appropriate wall anchors. Correct screwdriver size is key. Smallest extension depth will be shipped if no specific requests for custom extension length are made (additional cost applies for lengths beyond the standard ~1" from corner).

Enhance Your Home with the Corner Doorbell Mount

Perfect Design for Tight Spaces

The Corner Doorbell Mount is strategically designed to fit snugly in tight areas such as corners by storm doors. With its 15º outward angle and ~1" extension from the corner, this mount is ideal for those tricky spots that may otherwise be overlooked. It ensures that your doorbell remains accessible and aesthetically pleasing, even when space is limited.

Durable Construction for Long-Lasting Use

This Corner Doorbell Mount is built to last, featuring robust PETG materials that resist the elements. Because many homes experience harsh weather conditions, having a doorbell mount that can withstand the test of time is crucial. You can trust this mount to keep your doorbell secure and functional.

Easy Installation and Versatile Fit

Installing the Corner Doorbell Mount is straightforward with its user-friendly design. Whether you have narrow trim or are mounting near a storm door frame, this mount adapts seamlessly, providing a stable attachment point for many popular doorbell models (when selected).

Optional Add-ons & Customizations:

Enhance your installation (verify compatibility for 3/4" base if needed):

  • Customize Hole Spacing Add-on
    Customize Base Hole Spacing

    Need different spacing than the standard 2"? Add this service and provide your measurements.

  • Extension Pieces Add-on
    Further Extension from Corner

    Need more than the standard ~1" extension from the corner? Contact us for custom length options.

  • Color Change Request Add-on
    Custom Color

    Standard Black. For White, Brown, Grey, or other colors (SimpliSafe/Wyze default to White if color change not selected for those brands), add this service.

Visualization & Installation Help

Conceptual image:

Example of doorbell angled in a corner

Questions? Need Fit Confirmation or Customization?

Please send pictures of your doorbell and mounting area if you're unsure about fit, especially with the corner placement and doorbell size!

Default Color: Black (except SimpliSafe/Wyze which default to White). For other colors, add the Color Change Request item.

Doorbell Not Included. Includes the 15° angled corner mount base, doorbell-specific top adapter bracket, and assembly screws.

Material: Printed in durable, outdoor-rated PETG (superior to PLA).

3D Printed Quality: While usually fantastic, minor cosmetic imperfections are inherent to 3D printing and don't affect function. We'll gladly replace it if you're unhappy with quality.

Order your 15° Fixed Corner Mount today for a perfect fit in tight spaces! Remember to select your doorbell model.

View full details