Ring Pro 2 Doorbell Brick Extension - 9/16in Wide - 5/8" Offset Extenders

This mount is a brick extension mount for the RING Pro 2 only. 

In cases where the doorbell is located behind a thick brick wall or other obstruction, the extension can be used to move the button or doorbell to a location where it is visible and opposite the door.  It is available in various extension lengths.   If you cant mount your doorbell flat, or if something is in the way of the view, you can use this mount to correct it.   These mounts allow for wires to pass through the center.

The Standard Offset of 5/8 leaves about 3/8in gap on door side.  5/8" Offset means the center of the doorbell is offset 5/8in over the brick side which is for most smaller doorbells, mostly offsets the doorbell over the brick, so it is a more universal base for the brick extensions we sell) Full Offset is flush with door side.  For example See picture Below.  Click the picture to be taken to the full offset listing for the Ring Pro2.

The PRO2 only has 2 Mounting Screw Holes -  If yours has 4, you probably have the Generation 2 - Please see the listing for Generation2.  This one will not Fit.

This is made to put the doorbell past the bricks if your doorbell is mounted to trim.  It offsets the doorbell over the bricks and away from the door.  So if doorbell is too close to the swing of the door, this is what you will need.

 This Mount fits this Doorbell found on Amazon (affiliate link below)

If you have angled trim you can get angled shims to make sure your brick extension is perpendicular:

If you have a gap where you hole for your doorbell wire is far from your brick, you have a few options.   

You can 

1.  Install a Bottom Filler Spacer Plate -  Also Correct Angled Trim too in Combination.

2.  Provide a bottom Mouse Hole in the Brick Extension

3.  Add Body Shim Filler Plate

 This Mount fits this Doorbell found on Amazon (affiliate link

NORMAL COLOR is Black, if you need to purchase a different color, there will be a color change request listing to change the color.

Color Change Request

Be sure to send me a picture of your doorbell and where you want to mount it. Message me by email at shop@doorbellmount.com or text me at 318-759-7425.  

All my mounts have holes to allow for wire passthrough.

****While 3D printing provides really good production quality parts, there are often imperfections that may be found on the prints. These do not impair the function and rarely affect the aesthetics. But if your not happy with the quality, please text, email, or message me before leaving a review.