Down-Angle Add-on for the Ring Elite V2 4K Surface Mount — Built-In 5°, 8°, 10° or 15° Tilt
This add-on tilts your Ring Wired Doorbell Elite (2nd Gen, Retinal 4K + PoE) downward by 5°, 8°, 10°, or 15°. The down angle is printed right into your Ring Elite V2 Surface Mount with Angled Base, so there are no extra wedges, shims, or loose parts. Your doorbell points down at visitors' faces and the packages on your porch instead of the street or sky. Add it to your cart with the surface mount and we build the tilt into the same piece.
Add-on Only: Order With the Elite V2 Surface Mount
This listing does not include a mount by itself. It adds a built-in down angle to the Ring Elite v2 4K Surface Mount with Angled Base (15-30-45-60°).
- Works with any side angle on that listing. You get a side angle and a down tilt in one piece.
- Order one add-on for each surface mount, in the same order.
- Already bought the mount? Text or email us before ordering so we can match it to your mount.
Fits the Ring Wired Doorbell Elite (2nd Gen, 4K) Only
- Fits: Ring Wired Doorbell Elite 2nd Gen (Retinal 4K, PoE+). Available in Deep Silver and Polished Night Navy.
- Does NOT fit: the original 2017 Ring Elite (1080p), Ring Wired Doorbell Pro, or any other Ring doorbell.
Why Tilt Your Ring Elite Down?
A flat wall makes the doorbell look straight out. When the Elite sits higher than normal, or the porch is below the door, that straight-out view can cut off faces and the packages left at your door. A small built-in down angle fixes it:
- See packages: Keep deliveries on the doormat in the shot.
- See faces, not hats: Get visitors' faces centered in the picture.
- Less sky and glare: Less bright sky in the top of the picture can help the camera handle sunlight.
- Fewer street alerts: Aiming down helps keep passing cars out of the motion area.
Pick Your Down Angle
| Option | Add-on Price | A good choice when… |
|---|---|---|
| 5° Down | $20 | The doorbell is just a little high, or you only need a small nudge toward the porch. |
| 8° Down | $20 | Packages or faces are cut off at the bottom of your current view. |
| 10° Down | $25 | The doorbell is mounted well above normal height, or the porch is a step or two below the door. |
| 15° Down | $25 | Very high mounting, or you need a clear view of the ground right in front of the door. |
Not sure? Hold your phone where the doorbell will go and tip it down until the doormat is in the bottom of the screen. Or send us a photo and we'll recommend an angle.
What You Get
- Built-in, not bolted on: The tilt is printed into your surface mount, so it's one strong part with nothing to come loose.
- Side angle + down tilt together: Pair it with any side angle on the Elite V2 surface mount.
- Same clean look: Matches the mount's color (Black standard).
- Outdoor PETG: UV- and weather-resistant, made for years outdoors.
- Made in the USA: 3D-printed to order in Louisiana by DoorbellMount.com.
How to Order
- Open the Ring Elite V2 Surface Mount with Angled Base and choose your side angle. Add it to your cart.
- Come back here, choose 5°, 8°, 10°, or 15° Down, and add it to the same cart.
- Check out. We print the surface mount with your down angle built in.
Browse all Ring Elite 4K doorbell mounts. For a different color, add a Color Change Request.
How to Install Your Tilted Ring Elite Surface Mount
-
Check power: The Ring Elite runs on PoE+ (802.3at) over an Ethernet cable. Unplug the PoE switch or injector before you start.
A standard PoE (802.3af) injector will not power the Elite reliably. Use PoE+.
-
Find the thick edge: The tilt makes the mount thicker on one end. Put the thicker end at the top so the doorbell points down.
If the thick end is at the bottom, the doorbell will point up. Check before you drill.
- Mark and drill: Hold the mount on the wall, check that it's level side to side, and mark the screw holes. Drill pilot holes and add wall anchors if needed.
- Pull the cable through: Feed the Ethernet cable through the center opening of the surface mount.
- Fasten the mount: Screw the surface mount to the wall. Snug the screws, but don't over-tighten into the plastic.
- Connect and attach the Elite: Plug the RJ45 connector into the doorbell, then fasten the Elite to the mount the same way it attaches to a standard gang box.
- Check the view: Restore PoE power and open Live View in the Ring app. Faces and the doormat should be in the picture.
Follow Ring's Elite installation guide for wiring and setup. Turn off power before working on any doorbell wiring.
Questions & Answers
Can I buy this add-on by itself?
No. It changes the shape of the Ring Elite V2 Surface Mount, so order it together with that mount.
Can I combine a side angle and a down angle?
Yes. Pick the side angle on the surface mount listing and the down angle here. Both are built into one piece.
Will it fit the original Ring Elite from 2017?
No. This add-on is for the Ring Wired Doorbell Elite 2nd Gen (4K) only.
Which angle should I choose?
Most homes do well with 5° or 8°. Choose 10° or 15° if the doorbell is mounted high or the porch is below the door. Send us a photo if you're unsure.
Can I get an up angle instead?
This listing offers down angles only. Contact us if you need something custom.
Not Sure Which Angle You Need?
Send a photo of where your Ring Elite will go and we'll help you choose.
- Email: shop@doorbellmount.com
- Text/Call: 1-833-326-6868
Still Need the Ring Elite 4K?
This down-angle surface mount fits the Ring Wired Doorbell Elite 4K sold on Amazon:
- Ring Wired Doorbell Elite — Deep Silver on Amazon →
- Ring Wired Doorbell Elite — Polished Night Navy on Amazon →
Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases. Same Amazon price for you, small commission for us.
Add-on Only: Adds a built-in down tilt to the Ring Elite V2 Surface Mount. The surface mount is sold separately.
Angles: Angles are nominal. Your actual view also depends on wall flatness and mounting height.
3D-Printed Parts: Minor visible layer lines are normal and do not affect strength. Contact us with any quality concerns before leaving a review.
