Brick Face Extension for Ring Battery Doorbell Plus (2023) | 1536p HD+ | Head-to-Toe | Removable Battery | Custom Depth | Extend to Face of Bricks

$35.00
Custom-Depth Brick Face Extension for the Ring Battery Doorbell Plus (2023) ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee Brick Face Extension for the Ring Battery Doorbell Plus (2023) — Doorbell Sits...
Availability: Many In Stock
Product Type: Brick Face Mount

Custom-Depth Brick Face Extension for the Ring Battery Doorbell Plus (2023)

✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee

Brick Face Extension for the Ring Battery Doorbell Plus (2023) — Doorbell Sits Flush with the Brick

This Brick Face Extension for the Ring Battery Doorbell Plus (2023) (1536p HD+ with head-to-toe view, removable battery pack) extends from your wood trim out to the brick face — doorbell sits flush, sensor reads the porch cleanly. Custom-cut depth from 1-1/2 inch to 8 inches: measure your trim-to-brick gap, subtract 1 inch (doorbell thickness), and order that depth.

Sized specifically for the Ring Battery Doorbell Plus (2023, Removable Battery) (Amazon ASIN B0C12YH35P). 3D-printed to-order in the USA from UV-stable PETG, freeze-tolerant. Free shipping over $100. Replacement Guarantee covers a swap if your measurement is off.

CRITICAL: How to Measure for Brick Face Extensions

Brick Face Extensions are custom-cut to your exact depth. Measuring is the most important step — if the depth is wrong, the doorbell won't sit flush. Two methods:

How to measure trim to brick face for Ring Battery Doorbell Plus (2023) brick face extension
Method A — You HAVE your doorbell: Hold the doorbell against the brick face. Measure from the wood trim (where the bracket base will mount) to the BACK of the doorbell. Order that exact length.
Method B — You DON'T have your doorbell yet: Measure from the wood trim straight to the FRONT face of the brick. Then subtract 1 inch for the doorbell's depth. Order that result.

Example: If your trim sits 3 inches behind the brick face, order the 2-inch extension — the doorbell's 1-inch body added to the 2-inch extension equals 3 inches, putting the front of the doorbell flush with the brick face.

Not sure? Send a photo and your measurement to shop@doorbellmount.com — we'll confirm the right depth before you order. Wrong size? Replacement Guarantee covers a free swap.

Compatibility — Custom-Cut for the Ring Battery Doorbell Plus (2023, Removable Battery)

  • This brick face extension is custom-cut for the Ring Battery Doorbell Plus (2023, Removable Battery). The 2023 Ring Battery Doorbell Plus introduced 1536p HD+ resolution and head-to-toe portrait field of view over the older Ring 3/4 lineup. Removable battery pack and a distinct back-mount shape — has its own dedicated bracket.
  • Does NOT fit:
    • Ring Battery Doorbell Pro (2023, radar)
    • Ring Video Doorbell 2 / 3 / 3 Plus / 4 (older removable models)
    • Ring Battery Doorbell (2020-2025 integrated)
    • Ring Battery Doorbell Plus 2nd Gen (2026, Retinal 2K) — that's a separate listing
    • Any Wired Ring doorbell
  • Quick fit test: Check the Ring app — if your Live View shows 1536p HD+ in portrait (head-to-toe) AND your battery slides out the bottom AND you purchased it 2023-2025, this is the right bracket.
  • Not sure which Ring you have? Send a photo of the back of your doorbell to shop@doorbellmount.com — we'll confirm fit before you order.
Don't have the doorbell yet? Buy the Ring Battery Doorbell Plus (2023) on Amazon →

Brick Face Extension — The Doorbell Sits Flush with the Brick

This is the right pick when your doorbell would otherwise be recessed BEHIND the front face of the brick. Common when the trim or mounting surface sits significantly behind the brick face (often more than 1.5"). The extension fills that gap so the doorbell ends flush with the brick.

Pick the right offset for your install: Use Standard Offset Brick Mount if you only need to push the doorbell forward a bit (clear a storm door). Use Full Offset Brick Mount if your install is on the side of a brick edge or you need wider clearance. Use this Brick Face Extension if your doorbell would be recessed and you want it FLUSH with the brick face.

Brick Face Extension Dimensions & Material

  • Front Face Width: Sized to fit the Ring Battery Doorbell Plus (2023) body (custom adapter bracket on front)
  • Base Width: 9/16 inch (slim profile, fits within standard wood trim)
  • Depth: Custom-cut from 1-1/2 to 8 inches in 1/8-inch increments (45 sizes)
  • Pricing: Scales with depth from $34 (1-1/2") up to $93 (8")
  • Base Mounting: 2 holes in the rear of the base, designed to anchor in WOOD TRIM with #6 screws (#2 Phillips driver)
  • Material: UV-stable PETG, 3D-printed in the USA, freeze-tolerant across normal North American climates

Key Features & Benefits

  • Custom-Cut Depth: Pick your exact gap from a wide range of sizes.
  • Custom-Fit Front Bracket: Adapter bracket sized exactly for the Ring Battery Doorbell Plus (2023).
  • Trim-Mount Rear: Back anchors into wood trim with 2 #6 screws — no masonry drilling required for most installs.
  • Internal Wire Routing: 16-24V AC doorbell wires (or USB-C trickle charge cable) route through the back-to-front cavity — no exposed wiring.
  • Complete Hardware Kit: 2x #6 base screws, 4x #4 small screws (preinstalled in adapter bracket), doorbell-mount screws.
  • UV-Stable PETG: Freeze-tolerant 3D-printed PETG — real-world installs at 4+ years and counting.
  • Made in the USA: 3D-printed to-order. No inventory wait, no overseas shipping.
  • Replacement Guarantee: If your measurement is off, we ship the right depth at no extra cost.

Customization & Add-On Options

Installing Your Brick Face Extension on the Ring Battery Doorbell Plus (2023)

  1. Prepare: Remove your existing Ring Battery Doorbell Plus (2023) from the wall. If the doorbell is hardwired (Wired model), turn off power at the breaker first and disconnect the two transformer leads. Battery models — just pop the doorbell off the existing plate.
  2. Wire Routing: If hardwired, lead the transformer leads through the rear of the extension to the front.
  3. Mount the Extension Base: Position the back of the extension over the wood trim (or recessed mounting surface) where your old doorbell was. The base anchors to the trim with 2 provided #6 wood screws using a #2 Phillips screwdriver.
  4. Attach the Mounting Bracket: Fasten the Ring Battery Doorbell Plus (2023) adapter bracket to the front of the extension using the 4 small #4 center screws (preinstalled). USE #1 Phillips PRECISION screwdriver for the smaller screws.
  5. Mount the Doorbell: Slot the Ring Battery Doorbell Plus (2023) body onto the front face of the extension. If hardwired, connect the two leads first.
  6. Secure and Finalize: Mount the Ring Battery Doorbell Plus (2023) to the bracket using the screws PROVIDED WITH THIS MOUNT (not the original Ring screws). Reinstall the cover. Apply silicone caulk along the back perimeter where the extension meets the trim/brick if needed (skip the bottom edge for drainage). Restore power if applicable. Open the Ring app → Live View. Verify framing and redraw motion zones.

Tools recap: #2 Phillips screwdriver (#6 wood screws), #1 Phillips PRECISION screwdriver (#4 adapter screws and doorbell screws), drill (optional pilot holes), level, multimeter (wired models), clear silicone caulk.

FAQ — Ring Battery Doorbell Plus (2023) Brick Face Extension

Does this fit the Ring Battery Doorbell Plus (2023)?
Yes — the front-face mounting plate is shaped for the Ring Battery Doorbell Plus (2023, Removable Battery). The 2023 Ring Battery Doorbell Plus introduced 1536p HD+ resolution and head-to-toe portrait field of view over the older Ring 3/4 lineup. Removable battery pack and a distinct back-mount shape — has its own dedicated bracket.
How do I measure for the right depth?
See the Measurement Guide above. For Brick Face installs: trim-to-brick-face distance, minus 1 inch (doorbell thickness). For Standard Offset: the default 3-inch size works for most installs; pick a different size only if you have a specific gap to fill.
What if I order the wrong depth?
Send us a picture of your install attempt and the doorbell. Under our Replacement Guarantee, we'll ship the correct depth at NO additional cost. Reach out via text or email before installing the wrong one.
What screwdriver do I need for the small bracket screws?
A #1 Phillips PRECISION screwdriver. The #4 center screws are too small for a regular #1 Phillips — you need a precision driver (the kind used for eyeglasses or electronics).
Is the extension weatherproof?
Yes — UV-stable PETG (not PLA), freeze-tolerant across normal North American climates. Apply a small bead of clear silicone along the top and side edges if needed (skip the bottom edge for drainage). Real-world installs at 4+ years and counting.
Can I get this in a brick-matching color?
Default ships in Black. For brick-matching prints (red, tan, or gray), use the Color Change Request product at checkout. Custom color adds 1-2 days to fulfillment.

✔ Replacement Guarantee — The Right Fit, Guaranteed

Send a picture of your install area BEFORE you order. We'll confirm the exact size that fits. If you order and it doesn't fit, we'll send the correct one at NO ADDITIONAL COST.

  • Before you order: Text or email pictures of (1) your install location and (2) your measurement. We'll confirm and send a direct link.
  • If the size is wrong: Send a picture showing the gap. We'll ship the correct size at no extra cost.
  • How to send pictures: Text or email 833-326-6868 / shop@doorbellmount.com. Send before purchase or immediately after (must arrive before we ship).

This guarantee covers fitment / depth issues only. We can't replace parts damaged during install or after install.

Need to Buy the Doorbell, Tools, or Caulk?

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you.

Questions? Need Help Confirming Fit?

Brick installs are tricky. Send pictures — we'll confirm the right size before you order:

Standard Color: Ships in Black. For brick-matching prints (red, tan, gray), use the Color Change Request.

Install Note: The base mounts into wood trim with #6 screws. The brick face is preserved — only the optional side anchor screw contacts the brick (and only when used).

3D-Printed Parts: Minor cosmetic variations or layer lines may be present and do not affect strength or weather resistance.

Order your Brick Face Extension for the Ring Battery Doorbell Plus (2023) today — clean brick install, free shipping over $100, Replacement Guarantee included.