Brick Face Doorbell Extension for eufy Video Doorbell S4 (3K, 2026)

$44.50
$40.00
Brick Face Extension for the eufy Video Doorbell S4 (3K, Wired, 2026) — Bring a Recessed Doorbell Out Flush With the Brick ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee✔ Fit Verified...
Availability: Many In Stock
Product Type: Brick Face Mount

Brick Face Extension for the eufy Video Doorbell S4 (3K, Wired, 2026) — Bring a Recessed Doorbell Out Flush With the Brick

✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee✔ Fit Verified Before It Ships

When the trim sits back from the brick, an eufy Video Doorbell S4 mounted on it looks straight into the masonry — and with a 180° × 180° lens, that is a lot of wasted picture. This Brick Face Extension lifts the doorbell out to the face of the brick so the panoramic view clears the wall, without drilling a single hole in the brick.

The extension front carries our Eufy adapter bracket, confirmed to fit the S4. Select Eufy Video Doorbell S4 (2026), then your depth.

USA-made from UV-stable PETG and printed to your exact depth. Free shipping over $100. Doorbell details: eufy Video Doorbell S4 at eufy.com.

Measure before you order. The S4 body is about 1-1/2 inches deep (1.52"), so a brick face extension is usually about 1-1/2 inches shorter than your trim-to-brick-face measurement. The guide below walks you through it.

eufy Doorbell This Brick Face Extension Is Offered For

Choose Eufy Video Doorbell S4 (2026) in the Doorbell Model dropdown, then the depth you measured.

  • eufy Video Doorbell S4 (2026) — eufy's 3K panoramic doorbell: 9 MP (3072 × 3072) sensor with a true 180° × 180° head-to-toe view, OmniTrack AI tracking and auto-framing, radar plus dual PIR detection, color night vision and 24/7 recording. Wired-only (16-24V AC, 10-40 VA) with a built-in backup battery for outages. 4 GB local storage, expandable to 1 TB by SD card, no subscription required. Chime 2 included; works with Alexa, Google and Apple HomeKit (HomeKit needs a HomeBase 3). Wi-Fi 6, 2.4/5 GHz. Body about 6.57 × 2.0 × 1.52 inches (167 × 50.8 × 38.6 mm), 0.63 lb. Buy on Amazon → · Specs at eufy.com →

Good to know: The S4 mounts on our Eufy adapter bracket, the same bracket family that fits the E340, S330, C31, C30 and S220. Each of those models has its own listing in our Eufy doorbell mounts collection, so choose by the model you actually own and we print the right fit.

Not sure which eufy you have? Add a photo through the photo upload option on this listing and we confirm before anything ships.

Still shopping for the doorbell? Get the eufy Video Doorbell S4 (3K, with Chime 2) on Amazon →

CRITICAL: How to Measure for the Brick Face Extension

Brick extensions are custom-cut to your exact depth. Two ways to measure:

Method A — You HAVE your doorbell: Hold the doorbell against the brick face and measure from the wood trim to the BACK of the doorbell. Order that depth.

Method B — You DON'T have your doorbell yet: Measure from the wood trim straight out to the FRONT face of the brick, then subtract about 1-1/2 inches — the S4 body is 1.52 inches deep. Round to the nearest 1/8 inch.

How to measure from the trim to the brick for an eufy Video Doorbell S4 brick extension

Want a second opinion? Add a photo and your measurement through the photo upload option on this listing and we'll confirm before shipping. Wrong size? We swap it free.

Brick Face Extension — sits FLUSH with the brick. Choose this when your doorbell would otherwise be recessed BEHIND the brick face. For storm-door clearance use the Standard Offset; for maximum side clearance use the Full Offset.

Full walkthrough: How to Mount a Doorbell on Brick or Concrete. Wiring the S4: How to Install a Wired Doorbell.

Brick Face Extension Dimensions & Material

  • Front Face: Eufy adapter bracket, fits the Video Doorbell S4
  • Base Width: 9/16 inch (slim profile, fits standard wood trim)
  • Depth: 45 sizes from 1-1/2 inches to 8 inches in 1/8-inch increments
  • Pricing: Scales with depth from $39 up to $98
  • Material: UV-stable PETG, 3D-printed in the USA, freeze-tolerant
  • Hardware: 2× #6 base screws (wall mount) + the Eufy adapter bracket

Key Features & Benefits

  • Flush With the Brick: Brings a recessed S4 out to the brick face.
  • 45 Custom Depths: 1-1/2 inches to 8 inches in 1/8-inch steps.
  • Eufy Bracket Included: Confirmed fit for the Video Doorbell S4.
  • Wire Pass-Through: The S4's doorbell wires route through the rear cavity.
  • UV-Stable PETG: Outdoor rated, freeze-tolerant, made in the USA.

Brick Extension Add-Ons

Installing Your Brick Face Extension on an eufy Video Doorbell S4

  1. Order the right version: Choose Eufy Video Doorbell S4 (2026) and your extension depth in the dropdowns.
  2. Remove the old doorbell: Power down at the breaker and disconnect both wires.
  3. Route the wires: Thread the doorbell wires through the back of the extension so they exit at the front face.
  4. Mount the extension base: Position the extension on the trim, check it with a level, and fasten with the included #6 wood screws (#2 Phillips). Pilot holes help in hardwood.
  5. Attach the bracket: Attach the Eufy bracket to the extension front using the small center screws. Use a #1 Phillips PRECISION driver.
  6. Wire and mount the doorbell: Connect the wires to the S4 terminals, then seat the doorbell on the bracket with the screws PROVIDED WITH THIS MOUNT.
  7. Finish up: Restore power and verify the camera view in the eufy app — with a 180° × 180° lens, a half-inch of extra depth can noticeably change how much brick shows at the edge.

Tools: #2 Phillips screwdriver, #1 Phillips PRECISION screwdriver, drill (optional pilot holes), level, and a multimeter to confirm 16-24V AC at the wires.

FAQ — Brick Face Extension for the eufy Video Doorbell S4

How do I measure for a brick face extension?
With the doorbell in hand, measure from the trim to the back of the doorbell held at the brick face. Without it, measure trim to brick face and subtract about 1-1/2 inches for the S4 body.
What if my depth is off?
The Replacement Guarantee sends the correct depth at no extra cost — just contact us before installing.
Will this also fit my E340 or S330?
The S4 rides on the same Eufy adapter bracket family as the E340, S330, C31, C30 and S220, but each model has its own listing in our Eufy collection. Order from the listing for the doorbell you own so the bracket and photos match your install.
The S4 is wired-only. Does this mount handle the wiring?
Yes. Every one of our mounts has a wire channel through the body, so the two low-voltage doorbell wires run from the wall, through the mount, to the S4's terminals. The S4 needs 16-24V AC at 10-40 VA; its small internal battery is only a backup for power outages, so hardwiring is required.
Can I send photos so you confirm the depth?
Yes. Use the photo upload option on this listing and include your measurement; we review it before shipping.
Does it come in a brick color?
Yes — it defaults to Black, and you can choose a brick-matching color in the color options on this page.
Is it built for outdoors?
Yes — UV-stable PETG designed for year-round weather.

✔ Replacement Guarantee — We Review Your Photos Before It Ships

Upload photos of your eufy S4, trim and brick, along with your measurement, using the photo upload option on this listing. We check them before shipping so your extension arrives at the right depth with the right bracket — fit guaranteed.

  • Before it ships: Send photos of the trim, brick and doorbell through the photo upload option on this listing.
  • Problems after install? Contact 1-833-326-6868, or email shop@doorbellmount.com.

Doorbell & Install Tool Links

eufy doorbell:

Install tools & supplies:

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you. These small commissions help fund development of new mounts and brackets.

Questions About Measuring to the Brick Face?

Upload photos with the photo upload option on this listing, or reach us directly:

Color: Default color is Black. Use the color options on this page for brick colors and others.

eufy and Anker are trademarks of Anker Innovations Limited. DoorbellMount.com is an independent manufacturer and is not affiliated with or endorsed by Anker or eufy. The doorbell is not included.

Order your Brick Face Extension for the eufy Video Doorbell S4 today — flush with the brick, custom depth, Eufy bracket included, photo-reviewed before shipping at DoorbellMount.com.