75° Gang Box Doorbell Wedge Mount for Single Gang Electrical Boxes

$61.50
$54.95
75° Gang Box Doorbell Mount – Our Steepest Single Gang Box Wedge for Side-Wall Doorbells Select Your Doorbell First Designed to sit over a single gang electrical box (roughly 4" x 2.75"). Use the Doorbell Model menu to choose your...
Availability: Many In Stock
Product Type: Wedge

75° Gang Box Doorbell Mount – Our Steepest Single Gang Box Wedge for Side-Wall Doorbells

Select Your Doorbell First

  • Designed to sit over a single gang electrical box (roughly 4" x 2.75").
  • Use the Doorbell Model menu to choose your camera; we print the matching top plate for it.
  • You can upload photos of your installation area right on this listing. Each one is checked before we ship, and the fit is guaranteed.

Built for Boxes on the Wrong Wall

Some homes have the doorbell box on a wall that runs nearly perpendicular to the front door. A flat doorbell there films the side of the porch, not the person ringing it. The 75° wedge rotates the camera almost all the way around to face the doorstep while the base hides the old electrical box.

This is the most aggressive angle in our gang box line. For smaller corrections, the 30°, 45° and 60° versions use the same base and adapter system.

Features

  • 75° fixed angle: solid one-piece wedge, nothing to slip or re-tighten.
  • Hides the gang box: the footprint covers the full opening of a standard single gang box.
  • Adapter for your exact doorbell: chosen from the dropdown so mounting holes line up.
  • Wire pass-through: bottom notches route house wiring cleanly to the doorbell.
  • PETG construction: holds up to sun, rain and temperature swings; 3D printed in the USA.

In the Box

  • 75° gang box wedge base with the adapter plate for the model you choose
  • Pair of #6-32 screws for the electrical box
  • #6 x 1/2" screws for securing the doorbell

Tools

  • Phillips screwdriver
  • Non-contact voltage tester for wired installs

How to Install

  1. Kill the power.
    Switch OFF the breaker that feeds the doorbell transformer before you start.
  2. Take off the existing button or intercom plate and set the screws aside.
  3. Pull the wires through the center of the wedge base, with the bottom notches facing down.
  4. Screw the base onto the box using the supplied #6-32 screws.
  5. Land the wires on the doorbell terminals.
  6. Mount the doorbell to the top plate with the #6 x 1/2" screws.
  7. Turn the breaker back on and confirm the camera view covers your doorstep.

FAQ

How do I know I need 75° instead of 60°?

If the wall with the box is close to a right angle to your door, 75° usually centers the visitor. If the wall is angled more gently, 60° may be enough.

My doorbell is not in the dropdown. What now?

Choose Other (Not Listed) and upload a photo of your doorbell. We confirm the adapter fit before the order ships.

Will it cover a box that sticks out from the wall?

It is made for boxes that sit flush or nearly flush. Send a photo if your box protrudes and we will confirm before shipping.

Are other colors available?

Yes. Black ships by default; use the color selector on this listing to choose another color.

Compatibility Notes

For single gang electrical boxes only — not double gang or round boxes. Doorbell not included, and this mount is not a substitute for your doorbell's original mounting bracket.

Questions? Send Us a Photo

Printed to order in PETG. Small surface marks from the printing process are normal; reach out to us first if you have any concern about your mount.