60° Gang Box Doorbell Mount – Covers a Single Gang Electrical Box and Turns Your Camera 60 Degrees
Pick Your Doorbell Model Before Checkout
- The base is sized to cover a standard US single gang electrical box (about 4" x 2.75").
- Choose your exact doorbell in the Doorbell Model dropdown — each model gets its own adapter plate on top of the 60° wedge.
- Not sure it will fit? Upload a photo of your gang box and doorbell on this listing. We review every photo before your mount ships, and the fit is guaranteed.
When a 60° Turn Is the Right Choice
Old wired buttons and intercoms often sit on an electrical box mounted on a wall that runs alongside the entry, so a flat-mounted camera ends up staring at the porch railing or the house next door. This mount closes off the electrical box and swings the doorbell 60 degrees toward the approach, so visitors and packages land in the middle of the frame.
Sixty degrees is a steep correction. If your camera only needs a nudge, the 30° or 45° gang box versions are a better match; if it sits almost square to the door, look at the 75° version.
Features
- Full box coverage: the base hides the opening of a single gang box for a finished look.
- Fixed 60° wedge: one solid piece with no hinge or joint to loosen over time.
- Model-matched top plate: the adapter is printed for the doorbell you select, so the camera seats flush.
- Room for wiring: notches in the bottom let house wires pass through to the doorbell terminals.
- Outdoor-rated PETG: weather-resistant and 3D printed in the USA.
What's Included
- 60° gang box base with the adapter plate for your selected model
- Two #6-32 screws for attaching the base to the electrical box
- #6 x 1/2" screws for attaching the doorbell to the adapter plate
Tools You'll Need
- Phillips screwdriver
- Voltage tester (wired doorbells)
Installation
-
Shut off power.Turn OFF the doorbell circuit at the breaker before touching any wires.
- Remove the old button or intercom and confirm the gang box screw holes are in good shape.
- Feed the house wires through the opening in the base, keeping the bottom notches pointed toward the ground.
- Fasten the base to the electrical box with the two #6-32 screws.
- Connect the wires to your doorbell's terminals.
- Attach the doorbell to the adapter plate with the #6 x 1/2" screws.
- Restore power and check the live view in your doorbell app.
FAQ
Do I need to buy any screws?
No. The package includes the screws for the electrical box and the screws that hold the doorbell to the plate.
Will it fit a double gang box?
No. This base is sized for a single gang box only. Send us a photo if your box is a different size.
Does it work with battery doorbells?
Yes. Battery models mount the same way; you simply skip the wiring steps.
Is 60° too much for my entry?
Stand where the doorbell will go and point your phone camera at the spot where visitors stand. If you have to turn it more than about 45 degrees, 60° is a good choice.
What color is it?
Black is standard. Pick another color in the color selector on this page before adding to cart.
Compatibility Notes
Fits standard single gang electrical boxes only. The doorbell itself is not included, and this mount does not replace the original bracket that came with your doorbell.
Questions? Send Us a Photo
- Email: shop@doorbellmount.com
- Text: 1-833-326-6868
Every mount is 3D printed to order in PETG. Minor layer lines are normal and do not affect strength or fit — contact us before leaving a review if anything is not right.
