0-35° Swivel Mount for Eufy Video Doorbell S330 Wired (2022) | 2K HDR Dual Cam | Aim in Any Direction

$40.00
0-35° Swivel Mount for the Eufy Video Doorbell S330 (Wired Edition) Built for the Eufy S330 Wired — the 2K HDR dual-camera doorbell that ties into your existing chime wiring (16-24V, 30VA). This bracket pockets the S330's chunky body so...
Availability: Many In Stock
Product Type: Adjustable Mount 0-35°

0-35° Swivel Mount for the Eufy Video Doorbell S330 (Wired Edition)

Built for the Eufy S330 Wired — the 2K HDR dual-camera doorbell that ties into your existing chime wiring (16-24V, 30VA). This bracket pockets the S330's chunky body so it sits flush against your siding or trim, and the integrated 0-35° ball joint lets you swing both lenses up, down, left, or right until the framing is perfect. Printed in heavy-duty PETG with set-screw locking — doesn't sag, doesn't drift, doesn't fade in the sun. Ships ready to drill.

Fits ALL Eufy Video Doorbell Models

This swivel mount is fully compatible with the Eufy Video Doorbell S330 Wired — and with every other Eufy video doorbell on the market. Eufy designed their lineup with a consistent mounting footprint, so this same bracket also fits the E340 (2K dual cam), the C31 (2K wired or battery), the C30 (2K battery, 165° view), the S220 (2K battery), the C210 (1080p budget battery), and the original Eufy 2K Wired, 2K Battery, and Dual cam (HomeBase) models. Upgrade or change between Eufy doorbells anytime — no new mount needed.

Don't have it yet? Get the Eufy Video Doorbell S330 Wired on Amazon →

Will NOT fit other brands — Ring, Nest, Wyze, Blink, Arlo, and all non-Eufy doorbells use different body geometries. If you switch to a different brand of doorbell in the future, you don't need to buy a new mount — just order the matching adapter bracket (~$10) from our Replacement Bracket listing. The swivel base stays installed on your wall.

Not sure which Eufy you have? Doesn't matter — this mount fits all of them. Text us a photo if you have any questions.

Get the S330's Dual Cameras on Target

The S330 Wired is one of the only no-subscription dual-camera doorbells you can hardwire to existing chime wiring — but it's a thick body and Eufy's stock backplate gives you exactly zero adjustability. If your front door isn't perfectly square to the visitor approach (and most aren't), the head-on lens points at empty space and the package lens points at brick.

This 0-35° swivel mount fixes that. Tilt and swing the S330 in two axes until the visitor frame is centered and the package zone covers your doorstep, then lock with the set screws. One ball joint, two screws to lock, no app calibration needed.

Two-Axis Aiming, 0-35° Range

One smooth ball joint. Aim left, right, up, or down — all the way to 35° in any direction. Lock the angle with set screws. Done.

0-35 degree swivel doorbell mount adjustability diagram for Eufy doorbells
Ball-joint pivot — 35° each direction.

Internal Wire Routing — Hidden & Protected

Low-voltage wires enter from the wall, pass through the hidden internal channel inside the ball-joint mount, route through the front adapter, and connect directly to the doorbell terminals. No exposed wiring, no weather risk.

Internal wire routing diagram — wires pass cleanly through the swivel mount and connect to the doorbell terminals, keeping wiring hidden and protected from the elements

Mount Dimensions

  • Base Width: 1.8 inches
  • Base Height: 3.1 inches
  • Hole Spacing: 2-5/8 inches center-to-center
  • Wall Extension at 0°: ~1.5 inches (low-profile)
  • Narrow 3/4" baseplate option available for thin trim — see Customization below.

What You Get

  • Custom Bracket for S330 Wired: Pre-shaped pocket — flush against your wall.
  • Wire Pass-Through Joint: Routes the 16-24V transformer leads cleanly through the swivel.
  • Dual-Axis 0-35° Swivel: Aim with precision; lock with set screws.
  • Both Lenses Free: Mount design avoids both the front and downward cameras.
  • Outdoor-Rated PETG: Sun, rain, freeze cycles — no problem.
  • Siding Compatible: Lapped siding up to 1.8".
  • Universal Base: Upgrade your doorbell later, swap only the ~$10 adapter.
  • Complete Kit: Adjustable base, custom S330 bracket, all required mounting screws.

Customization & Add-Ons

Installing on the Eufy S330 Wired

  1. Power Off: Cut power to the doorbell circuit at the breaker.
    The S330 Wired requires a 16-24V AC, 30VA transformer. If your old doorbell ran on 8-12V (typical for mechanical chimes), you'll need to upgrade the transformer first — Eufy's S330 will not chime correctly otherwise.
  2. Mount the Base: Pull the doorbell wires through, screw the base to the wall with #6 screws / PH2 driver. Anchors if not hitting a stud.
  3. Attach the Swivel: Route the wires through the swivel center, attach to base with four #4 / PH1 screws.
  4. Wire the Doorbell: Connect the two transformer leads to the screw terminals on the back of the S330. Polarity doesn't matter for AC.
  5. Lock In the S330: Use the screws PROVIDED WITH THIS MOUNT (PH1 driver) to attach the doorbell — these are sized for our bracket geometry, not Eufy's stock plate.
  6. Aim & Lock: Open the eufy Security app, go to Live View, tilt the swivel until both lenses frame correctly, then snug down all set screws.
  7. Restore Power: Flip the breaker, test the chime, confirm Live View, set up Delivery Guard zones in the app.

Note: the S330 Wired does not work with HomeBase 2 or 3. Recordings save locally on the doorbell itself — keep that in mind when picking firmware update windows.

Questions About Fitment?

Standard Color: Ships in Black. Other colors via Color Change Request.

Need to Buy Your Eufy Doorbell?

Quick links via our Amazon Associates account — current Eufy lineup:

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you. Pricing is controlled by Amazon and may change.

Angle Note: The 35° maximum is approximate; actual range varies slightly by surface and orientation.

3D-Printed Parts: Minor visible layer lines are normal and do not affect strength. Each mount is printed-to-order in our USA shop.

Get the angle right on your Eufy doorbell — order today and we'll print it within 24-48 hours.