0-35° Adjustable Swivel Mount for Eufy Video Doorbell S220 (2022) | 2K Battery | Set-Screw Lock & Swivel

$40.00
0-35° Swivel Mount Custom-Fit to the Eufy Video Doorbell S220 A 3D-printed swivel mount made for the Eufy Video Doorbell S220 — the battery-powered 2K doorbell that famously runs about 180 days between charges thanks to its on-device AI. This...
Availability: Many In Stock
Product Type: Adjustable Mount 0-35°

0-35° Swivel Mount Custom-Fit to the Eufy Video Doorbell S220

A 3D-printed swivel mount made for the Eufy Video Doorbell S220 — the battery-powered 2K doorbell that famously runs about 180 days between charges thanks to its on-device AI. This bracket cradles the S220's shell exactly, and the integrated 0-35° dual-axis ball joint lets you fine-tune the lens angle so you don't have to compromise on doorbell placement. Heavy-walled PETG print, set-screw locked, ready for siding, brick face plates, vinyl, or wood trim. Designed and made-to-order in the USA.

Fits ALL Eufy Video Doorbell Models

This swivel mount is fully compatible with the Eufy Video Doorbell S220 — and with every other Eufy video doorbell on the market. Eufy designed their lineup with a consistent mounting footprint, so this same bracket also fits the E340 (2K dual cam), the S330 (wired and battery dual cam), the C31 (2K wired or battery), the C30 (2K battery, 165° view), the C210 (1080p budget battery), and the original Eufy 2K Wired, 2K Battery, and Dual cam (HomeBase) models. Upgrade or change between Eufy doorbells anytime — no new mount needed.

Don't have it yet? Get the Eufy Video Doorbell S220 on Amazon →

Will NOT fit other brands — Ring, Nest, Wyze, Blink, Arlo, and all non-Eufy doorbells use different body geometries. If you switch to a different brand of doorbell in the future, you don't need to buy a new mount — just order the matching adapter bracket (~$10) from our Replacement Bracket listing. The swivel base stays installed on your wall.

Not sure which Eufy you have? Doesn't matter — this mount fits all of them. Text us a photo if you have any questions.

Why a Swivel Pays Off for the S220's Long Battery Life

The S220's appeal is the 180-day battery — you charge it twice a year and forget about it. But that battery life depends heavily on motion detection efficiency: if the camera is aimed at a busy street or a windy bush, you'll wake the camera dozens of times a day, the battery drains faster, and the AI generates noisy false-positive alerts.

A precise swivel angle gets the lens looking only at your porch — not the street, not the next-door driveway. Eufy's stock backplate doesn't tilt; this 0-35° dual-axis mount does, and the result is fewer false motion events, longer battery life between charges, and cleaner notifications. Lock the angle once with the set screws and forget it.

Two-Axis Aiming, 0-35° Range

One smooth ball joint. Aim left, right, up, or down — all the way to 35° in any direction. Lock the angle with set screws. Done.

0-35 degree swivel doorbell mount adjustability diagram for Eufy doorbells
Ball-joint pivot — 35° each direction.

Internal Wire Routing — Hidden & Protected

Low-voltage wires enter from the wall, pass through the hidden internal channel inside the ball-joint mount, route through the front adapter, and connect directly to the doorbell terminals. No exposed wiring, no weather risk.

Internal wire routing diagram — wires pass cleanly through the swivel mount and connect to the doorbell terminals, keeping wiring hidden and protected from the elements

Mount Dimensions

  • Base Width: 1.8 inches
  • Base Height: 3.1 inches
  • Hole Spacing: 2-5/8 inches center-to-center
  • Wall Extension at 0°: ~1.5 inches (low-profile)
  • Narrow 3/4" baseplate option available for thin trim — see Customization below.

What You Get

  • Custom Bracket for S220: Snug pocket — flush against your wall.
  • Dual-Axis 0-35° Swivel: Tilt and pan the lens away from streets and bushes for cleaner AI detection.
  • Battery-Friendly: No transformer wires to route. 15-minute install.
  • Set-Screw Lock: Stainless screws hold the angle through wind and freeze cycles.
  • Outdoor-Rated PETG: Print holds up to UV, rain, and -20°F+ temps.
  • Siding Compatible: Flat or lapped siding up to 1.8" wide.
  • Universal Base: Future-proof — upgrade your doorbell with a ~$10 adapter swap.
  • Complete Kit: Base, custom S220 bracket, all required mounting screws.

Customization & Add-Ons

Installing on the Eufy Video Doorbell S220

  1. Charge First: Top off the S220's battery before install (5V USB-C, full charge from empty takes ~6 hours).
    The S220 is battery-only. There is no chime wiring step. If you have an existing mechanical chime, leave it disconnected.
  2. Mount the Base: Position the base vertically or horizontally on the siding/trim. Drill pilot holes, screw in with #6 screws / PH2 driver. Anchors if not into a stud.
  3. Attach the Swivel: Four #4 / PH1 center screws hold the swivel to the base.
  4. Pair in the App: Add the S220 to the eufy Security app while it's still in your hand — easier than reaching up to the wall to scan a QR code later.
  5. Snap In the Doorbell: Use the screws PROVIDED WITH THIS MOUNT (PH1) — not Eufy's stock plate screws.
  6. Aim & Lock: Live View → tilt swivel → cover the porch zone, exclude the street/yard → tighten set screws.
  7. Tune AI Zones: In the eufy app, set Activity Zones to mask anything outside your porch. Combined with the swivel angle, this is what extends battery life past 6 months.

Battery tip: if your S220 is draining faster than 180 days, you're almost certainly capturing too much non-porch motion. Re-aim with the swivel and tighten the Activity Zones — those two together typically double battery life.

Questions About Fitment?

Standard Color: Ships in Black. Other colors via Color Change Request.

Need to Buy Your Eufy Doorbell?

Quick links via our Amazon Associates account — current Eufy lineup:

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you. Pricing is controlled by Amazon and may change.

Angle Note: The 35° maximum is approximate; actual range varies slightly by surface and orientation.

3D-Printed Parts: Minor visible layer lines are normal and do not affect strength. Each mount is printed-to-order in our USA shop.

Get the angle right on your Eufy doorbell — order today and we'll print it within 24-48 hours.