SimpliSafe Series 2 Camera Vinyl Siding Mount | No-Drill & Adjustable
Compatibility Check: SimpliSafe Series 2 Outdoor Camera & Siding Type
- Camera Model: Fits the **SimpliSafe Outdoor Camera (Series 2)** ONLY. (Mount provides a standard 1/4"-20 threaded post for attaching the camera's magnetic or screw-on base - please verify your camera uses this standard connection).
- Siding Type: Works on most standard horizontal and Dutch lap vinyl siding panels where the exposed flat face (the "lap") measures between 3 inches and 5 inches tall. (~95% fit rate for standard US siding).
- WILL NOT FIT: Other Cameras, Indoor cameras, or other brands.
Unsure if this is right for your camera and siding? Send us a picture of both!
Mount Your SimpliSafe Series 2 Camera Anywhere on Vinyl Siding - No Drilling Needed!
Get a secure, damage-free installation for your SimpliSafe Outdoor Camera (Series 2) on any suitable vinyl siding panel! This innovative bracket uses adjustable clips that slide securely under your siding seams, providing a stable platform using a standard camera mount thread. Perfect for renters or anyone wanting to avoid drilling holes in their siding!
Secure Screwless Installation Method
This mount cleverly avoids damaging your siding:
- The top clip rotates and slides under the upper siding panel's bottom edge.
- The bottom bracket slides up to grip the lower lip of the target siding panel.
- Adjusts vertically to fit siding laps between 3 inches and 5 inches wide.
- Set screws are included to lock the adjustable pieces firmly once fitted to your siding width.
- Included outdoor tape can be applied to the hooks for added security.
- Provides a standard **1/4"-20 threaded post** (confirm compatibility) for attaching your SimpliSafe Series 2 Camera base.
Installation is quick and easy, protecting your valuable siding!
Our Siding Fit Guarantee!
We're confident this mount will fit standard horizontal vinyl siding with 3" to 5" lap exposure. If you encounter issues fitting it on siding within this range, please contact us! Send pictures showing the siding profile and the issue, and we'll collaborate with you to send **free replacement parts** if necessary until it fits. Your satisfaction is guaranteed!
Key Features & Benefits:
- No Drilling into Siding: Preserves your vinyl siding's integrity.
- Designed for SimpliSafe Series 2 Outdoor Cam: Provides standard 1/4"-20 threaded post for camera base attachment (verify camera base).
- Adjustable Siding Fit: Works on most standard/Dutch lap vinyl siding with 3" to 5" lap exposure.
- Stable & Secure Hold: Locking mechanism and optional tape ensure a firm installation.
- Install Anywhere: Position your SimpliSafe camera for optimal coverage on any suitable siding panel.
- Durable PETG Construction: Made from strong, UV-resistant PETG plastic suitable for outdoor use.
- Renter Friendly: Easy, damage-free installation and removal.
Clipping Vinyl Siding Mount Installation Guide
- Prepare: Unpack mount. Pull the bottom hook down slightly more than the width of one vinyl siding plank.
- Apply Tape (Optional but Recommended): Remove protective covering from tape on bottom & top hooks. (Extra tape may be included). Ensure top clip is loose.
- Insert Top Hook: At a horizontal siding joint, insert the top hook into the seam at a ~45° upward angle. Rotate mount down flat against siding; hook should engage siding lip. (Apply slight upward pressure while rotating if needed).
-
Position & Secure Top Clip: Once top hook is engaged and mount is flat, push top clip IN towards siding. Insert & tighten the small **#4 x 1/4in screw (provided)** into top clip to lock it.
Confirm position before tightening this screw.
- Secure Bottom Hook: Slide bottom hook firmly UPWARDS against the bottom lip of the same siding panel until snug.
-
Optional Side Screws: Insert small side screws (provided) into bottom hook assembly pilot holes if desired for extra locking security.
Tighten gently; these prevent sliding.
-
Mount Your SimpliSafe Camera: Attach the magnetic or screw-on base of your **SimpliSafe Outdoor Camera (Series 2)** onto the **1/4"-20 threaded post** provided on the front of this siding mount. Tighten securely according to SimpliSafe instructions. Attach camera to its base.
Ensure camera base is fully tightened onto the threaded post.
Ensure the mount is stable before attaching camera. Periodically check tightness. Follow all SimpliSafe guidelines for camera setup.
Enhance Your SimpliSafe Camera Experience
Optimal Positioning for Security
This SimpliSafe Gen 2 Camera vinyl siding mount allows flexible installation to maximize surveillance coverage. The adjustable design helps achieve the best angle for clear footage of your property.
Easy, Damage-Free Installation
Designed specifically for vinyl siding, this mount avoids drilling or complex hardware. Follow the simple clipping steps to have your camera securely mounted quickly and without damaging your home's exterior.
Durable Outdoor Construction
Crafted from high-quality PETG, this mount withstands outdoor conditions, ensuring your SimpliSafe camera remains securely attached and functional, providing reliable monitoring year-round.
Optional Add-ons:
-
Custom Color
Standard color is Black or White (often matched to SimpliSafe). Contact us or use this listing to request other colors like Brown, Grey, etc.
Installation Video Example
Watch videos demonstrating the general clipping mechanism:
(Videos show general installation process for vinyl siding mounts. Camera attachment method may vary slightly.)
Questions About Compatibility or Siding Fit?
Unsure if this mount is right for your SimpliSafe Gen 2 Camera or your specific vinyl siding? Send us pictures!
- Email: shop@doorbellmount.com (Send Pictures!)
- Text/Call: 1-833-326-6868 (Text Pictures!)
Standard Color: White (to match SimpliSafe). Black also available - specify if preferred or use Color Change request for other colors.
SimpliSafe Camera NOT Included: This listing is for the vinyl siding mount ONLY (clips and camera mounting plate/post).
Siding Fit Guarantee: Applies to standard horizontal vinyl siding panels with 3" to 5" exposure.
3D Printed Quality: Produced using durable PETG. Minor cosmetic variations are normal for 3D printing and do not affect performance. We stand by our quality.
Order your No-Drill Vinyl Siding Mount for the SimpliSafe Outdoor Camera Gen 2 today for easy, secure, damage-free installation!
