Corner Mount

Corner Doorbell Mount Angled 30º for SMALLER Video Doorbells | Universal Selected

Fixed Mount - Available with Angle Adapters Or No Angle Straight Out.

$32.50 USD

~~$35.00 USD~~ $32.50 USD

Sale Sold out

Shipping calculated at checkout.

Quantity

Doorbell Corner Mount (30° S-Shaped) | For Small Doorbells Like Eufy

Perfect for Eufy & Other Small Doorbells in Corners!

This mount features a fixed **30-degree angle** and an "S-shaped" design to optimally position smaller doorbells in a corner. Its **narrow 3/4-inch base** fits tight spaces, ideal for storm door frames.

CRITICAL: You MUST Select Your Specific Doorbell Model from the options list for a perfectly matched top adapter bracket.
Designed For Doorbells (approx. <1.6" - 2" wide): Ideal for Eufy, Blink, Logitech, SimpliSafe, Google Nest Hello, Ring Pro/Wired (non-battery), and other similarly sized models when installed flush in a 90° corner. (The S-shape design means the center of the top bracket is offset approx. 0.854" from the true corner vertex).
Wider Doorbells (e.g., Ring Battery Doorbells ~2.5" wide): Can work if the mount is installed slightly **offset from the absolute corner** (e.g., 1/4" to 3/4" away from one corner edge) to allow the doorbell to fit without excessive overhang.
WARNING: If trim is very narrow and near a door swing, any doorbell might be an obstruction. Send pictures of your mounting area for a fit assessment BEFORE ordering if unsure.

Enhance Your Home Security with the 30° S-Shaped Corner Mount

Struggling to find the right spot for your Eufy or other compact video doorbell in a corner or on slim trim by a storm door? This **Fixed 30° S-Shaped Corner Mount** is engineered for these tricky situations! Its narrow 3/4" base fits where others can't, while the unique S-shape provides a 30-degree outward angle and optimal offset from the corner vertex.

This design ensures your camera captures the approach effectively, enhancing visibility and security by positioning the doorbell for a better line of sight. Wires pass through the inside for a clean look.

Mount Specifications

Fixed Angle: Provides a **30-degree horizontal angle** (angled outward from the corner).
Design: "S-Shaped" for optimized corner placement; typically positions doorbell ~1" out from the corner.
Base Wall Footprint Width: 3/4 inches (0.75").
Base Wall Footprint Length: Approx. 2.5 inches.
Base Mounting Hole Spacing: Standard **2 inches** (center-to-center). (Customizable via add-on service).
Effective Offset: The mount's center is offset ~0.854" from the corner vertex. This is ideal for doorbells up to ~2" wide if you want them truly in the corner. Wider doorbells will need the mount positioned slightly away from the corner.

Key Features & Benefits:

30° Fixed Outward Angle: Perfect for directing camera view from corner installations.
"S-Shaped" Offset Design: Optimizes placement for doorbells, especially around storm door frames.
Ultra-Narrow 3/4" Base: Fits in 98% of tight corners and on slim door trim.
Standard 2" Hole Spacing: Often matches existing doorbell button holes (customizable).
Requires Doorbell Model Selection: Ensures you receive the correct pre-drilled top adapter bracket.
Internal Wire Passthrough: For a clean, professional installation of wired doorbells.
Durable PETG Construction: Weather-resistant and much stronger than PLA for outdoor applications.
Includes All Assembly Screws: For connecting the adapter bracket to the mount base.
Future-Proof System: The top adapter bracket is replaceable if you change doorbell models (available here).

Installing Your 30° Fixed Corner Mount

Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed), selected doorbell model & its specific hardware (if any for faceplate).
Turn OFF power at the breaker if hardwiring!
Position & Mount Angled Base: Place the **30° S-Shaped Corner Base** snugly into the corner, ensuring the 30° angle directs the doorbell as desired. Mark and drill pilot holes if needed. Secure the base to **one side** of the corner trim/wall using appropriate screws (#6 size likely, use PH2) and anchors through the 2" spaced holes.
Ensure base is level vertically. Do NOT overtighten wall screws. For wider doorbells (>2"), install base slightly offset from the corner for best fit.
Attach Doorbell Adapter Bracket: Route wires through the **Doorbell Adapter Bracket** (specific to your selected doorbell). Align this bracket onto the angled face of the mounted Corner Base. Attach using the small screws provided (likely #4 screws / PH1 driver).
Tighten screws snugly until bracket is flush. Clear any plastic debris from pilot holes if needed.
Wire Doorbell: Connect wires to your video doorbell per its manufacturer's instructions. Tuck excess wire.
Attach Doorbell to Adapter Bracket:
- Align your doorbell (or its specific backplate, if used with our adapter) with the pre-drilled holes on the custom Doorbell Adapter Bracket.
- Secure the doorbell/plate using the small screws PROVIDED WITH THIS MOUNT (typically #4 / PH1 driver).
- DO NOT USE screws that came with your doorbell for THIS step unless specified for your model's backplate when attaching to our adapter.
- Replace your doorbell's cover/faceplate.
Use correct PH1 driver. Tighten gently to avoid stripping.
Final Check & Power On: Ensure doorbell is secure. Turn power back on (if applicable) and test.

Follow safety rules & your doorbell's guidelines. Use appropriate anchors. Smallest extension (approx. 1" from corner due to S-shape) will be shipped unless custom extension length requested (additional cost applies).

Why Choose the Eufy & Small Doorbell Corner Mount?

Perfect Design for Tight Spaces

This S-Shaped Corner Doorbell Mount is strategically designed to fit snugly in tight areas such as corners by storm doors. With its 30º outward angle, this mount is ideal for tricky spots, ensuring your Eufy or other small doorbell remains accessible and provides an optimal view, even when space is limited.

Durable Construction for Long-Lasting Use

Built to last with robust PETG materials that resist the elements, this mount withstands harsh weather, keeping your doorbell secure and functional year-round. Installation is straightforward and designed for longevity.

Easy Installation and Versatile Fit

Installing this Corner Doorbell Mount is user-friendly. Whether on trim or near a storm door frame, it provides a stable attachment point for many popular smaller doorbell models (when your specific device is selected for the custom top bracket).

Optional Add-ons & Customizations:

Enhance your installation:

Customize Base Hole Spacing
Need different spacing than the standard 2" for the base? Add this service and provide your measurements.
Further Extension from Corner

Need more than the standard ~1" effective extension from the corner? Contact us for custom length options.
Custom Color

Standard Black (except SimpliSafe/Wyze default White). For other colors, add this service.

Visualization & Installation Help

Product Image:

30 Degree S-Shaped Corner Doorbell Mount

Questions? Need Fit Confirmation or Customization?

Please send pictures of your doorbell and mounting area if you're unsure about fit, especially for corner placement and doorbell size! We can confirm if this mount or a custom solution is best.

Email: shop@doorbellmount.com (Send Pictures!)
Text/Call: 1-833-326-6868 (Text Pictures!)

Default Color: Black (except SimpliSafe/Wyze usually White). For other colors, add the Color Change Request item.

Doorbell Not Included. Includes the 30° angled S-shaped corner mount base, doorbell-specific top adapter bracket, and assembly screws.

Material: Printed in durable, outdoor-rated PETG (superior to PLA).

3D Printed Quality: While usually fantastic, minor cosmetic imperfections are inherent to 3D printing and don't affect function. We'll gladly replace if you're unhappy with quality.

Order your 30° S-Shaped Corner Mount today for a perfect fit in tight spaces, especially for Eufy and other small doorbells! Remember to select your doorbell model.