Adjustable Corner Doorbell Mount | 0-90° Horizontal Angle | Narrow 9/16in Wide |Universal Selection

$55.00
$45.00
Adjustable Corner Doorbell Mount (0-90° Horizontal Angle) | Narrow Base Narrow Base Fits Tight Spaces! Select Your Doorbell Model. This mount features our **Ultra-Narrow 9/16-inch Base**, perfect for installing in corners or on slim trim (requires >= 3/4" space for...
Availability: Many In Stock
Product Type: Adjustable Corner Mount

Adjustable Corner Doorbell Mount (0-90° Horizontal Angle) | Narrow Base

Narrow Base Fits Tight Spaces! Select Your Doorbell Model.

This mount features our **Ultra-Narrow 9/16-inch Base**, perfect for installing in corners or on slim trim (requires >= 3/4" space for mounting).

  • CRITICAL: You MUST Select Your Specific Doorbell Model from the options list to receive the correct custom-fitted top adapter bracket.
  • Compatible with most popular video doorbell brands (Ring, Nest, Eufy, Wyze, Blink, etc.).
  • Model Not Listed or Unsure? Contact us with a picture! (Details below).

Need help identifying a Ring model? Check our Ring Model Guide.

Get the Perfect Sideways Angle, Even in Corners!

Need to aim your video doorbell horizontally anywhere from straight ahead to a full 90 degrees sideways? This Adjustable Horizontal Corner Mount offers an exceptional 0-90 degree adjustment range, perfect for corner installations or situations needing precise **horizontal** aiming.

Its ultra-narrow profile (only 9/16" wide!) allows it to fit in very tight spaces where standard mounts won't, including corners or trim requiring at least 3/4" width.

Wide Range Horizontal Swivel (0-90°)

This mount is specifically designed for **Horizontal (Left/Right) angle adjustment**. The swivel provides a smooth, lockable range of motion from 0° (straight forward) to approximately 90° (perpendicular to the mounting surface).

Reversible Design: The base can typically be flipped during installation to allow swiveling towards the left or the right.

Note: This mount primarily adjusts side-to-side. For vertical tilt, consider our dual-axis swivel mounts.

Mount Specifications

  • Base Width: 9/16 inches (Fits mounting surfaces >= 3/4" wide).
  • Base Length: Approx. 2.8 inches.
  • Base Hole Spacing: Typically **2-3/16 inches** center-to-center. Verify this spacing or contact us if you need a different pattern! (Custom spacing available).
  • Horizontal Swivel Range: 0° to ~90°.

Mounting Kit Highlights:

  • Extreme Horizontal Adjustment (0-90°): Aim your doorbell from straight forward to fully sideways (left or right).
  • Corner Installation Optimized: Designed to mount securely and function effectively in corner locations.
  • Ultra-Narrow 9/16" Profile: Installs in very tight spaces (needs >= 3/4" width).
  • Customized Doorbell Fit: Select your doorbell model for a tailored top adapter plate.
  • Secure Angle Locking: Set screw firmly holds the desired horizontal angle.
  • Reversible L/R Angling: Base can be flipped for opposite direction swivel.
  • Clean Wire Routing: Features an internal channel for doorbell wires.
  • Durable PETG Construction: Strong, weather-resistant PETG plastic – better than PLA outdoors.
  • Extension Compatible: Can potentially be used with fixed extension pieces (sold separately, contact for compatibility).
  • Mounting Hardware Included: Comes with base, swivel bracket, adapter plate, and assembly screws.
  • Future-Proof Potential: Base system may support replacement adapter brackets (check options).

Mounting Your Horizontal Corner Bracket

  1. Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed), doorbell & its specific hardware.
    Turn OFF power at the breaker if hardwiring!
  2. Mount Narrow Base: Position the Narrow (9/16" Wide) Base on your >=3/4" trim/wall over wires (orient for L/R swivel). Attach securely using appropriate screws (#6 size likely, use PH2) and anchors into the base's holes (check 2-3/16" spacing or your custom need).
    Ensure base is level/plumb & secure. Don't overtighten.
  3. Set Initial Horizontal Angle: Adjust the swivel bracket **horizontally** within the 0-90° range. Lightly tighten the **set screw** (likely #4 / PH1 driver).
  4. Wire Doorbell: Connect wires per manufacturer's instructions. Tuck excess wire.
  5. Attach Doorbell to Custom Bracket:
    • Align your selected doorbell model (or its plate if used) with the pre-drilled holes on the custom swivel mount adapter bracket.
    • Secure doorbell/plate using screws PROVIDED WITH THIS MOUNT (likely #4 / PH1).
    • DO NOT USE doorbell manufacturer's wall screws. Follow final doorbell steps (e.g., faceplate).
    Use correct drivers & provided screws. Tighten snugly.
  6. Finalize & Secure Angle: Make final **horizontal** angle adjustments. Fully tighten the **set screw** gently but firmly.
    Do not overtighten set screw!
    Restore power (if applicable) and test.

Follow safety protocols & doorbell guidelines. Use appropriate anchors. Use correct Philips bits to avoid stripping.

Versatile Installation Angles

Achieve virtually any horizontal angle between 0 and 90 degrees. This outstanding flexibility ensures optimal motion detection and clear video, regardless of wall structure or approach path – perfect for challenging corner perspectives.

Easy Installation Process

Installing this corner mount is straightforward. Secure the narrow base to your wall or trim (verify or customize hole spacing!), adjust the doorbell horizontally, and tighten the locking screw. Setup is quick and efficient.

Durable and Weather-Resistant Design

Made from high-quality, UV-stable PETG plastic, this mount is built to endure outdoor conditions. Unlike mounts made from PLA, PETG ensures long-lasting performance, protecting your doorbell investment.

Optional Add-ons & Customizations:

Tailor your installation further:

  • Customize Hole Spacing Add-on
    Custom Base Hole Spacing

    Need to match existing non-standard wall holes (different from 2-3/16")? Add this service to your order and provide measurements.

  • Extension Pieces

    Need to bring the entire mount further from the wall? Contact us about compatible fixed extension pieces.

  • Color Change Request Add-on
    Custom Color

    Want your mount in White, Brown, Grey, or another color? Add this service to your order.

  • Angled Shims Add-on
    Angle Shims (5°, 10°, 15°)

    May correct for angled trim *under the Base* (Contact us to confirm compatibility with 9/16" base).

    • Installation Video & Examples

    General installation concept video:

    Watch Installation Guide

    (Video demonstrates general assembly principles.)

    Questions? Need Help with Fit or Model?

    Unsure about hole spacing or if this mount works for your doorbell model? Need a different configuration?

    Standard Color: Black. For other colors, add the Color Change Request item.

    Angle Note: Provides horizontal adjustment from 0° to approx. 90°.

    Model Selection Required: You must select your doorbell model for the correct top adapter bracket.

    3D Printed Quality: Made from durable PETG. Minor cosmetic variations are normal for 3D printing and don't affect strength. Contact us with quality concerns.

    Doorbell Not Included. Kit includes narrow base, horizontal swivel top bracket+adapter, and assembly hardware.

    Order your Adjustable Horizontal Corner Mount for the ultimate aiming flexibility in tight spaces! Don't forget to select your doorbell model.