Narrow Trim Doorbell Mounts have an intentionally slim base — typically 3/4" or 9/16" wide — designed for the tightest installation areas: slim door frames, storm-door trim, narrow pilasters, and any spot where a standard mount is too wide to fit.
Every narrow trim mount in this collection is a fixed (non-adjustable) bracket that holds your doorbell straight out from the wall with a slight default forward extension. Add an optional extension piece if you need more depth, or pair with a wedge if you need a fixed angle.
Select your specific doorbell model on the product page. Each mount ships with a custom-fit top adapter bracket sized to your doorbell — Ring, Nest, Eufy, Wyze, Blink, Lorex, SimpliSafe, Reolink, Arlo, Xfinity, Ubiquiti, TP-Link Tapo, Aqara, Ecobee, AOSU, Chamberlain myQ, Roku, Logitech Circle View, and more.
| If your install is... | Use this |
|---|---|
| Slim door frame or storm-door trim — straight-out only | Narrow Trim (you are here) |
| Narrow corner with a needed outward angle (15°, 30°, 45°) | Fixed Corner Mounts |
| Flat surface where you know the exact fixed angle you need | Wedge Mounts |
| Need to re-aim the camera after install | Adjustable Swivel Mounts |
| Behind brick, stone, or deep siding | Brick Extensions |
Each product page lets you pick your specific doorbell model. Standard hole spacing is 2 inches — if your existing holes don't match, add the Custom Hole Spacing service from the Fixed Mount add-ons.
Slim 3/4" wide base for tight door frames and uneven trim. Slight default forward extension. Custom-fit top adapter for your specific doorbell model. Combine with extension add-ons if you need more depth.
The universal version — pick your doorbell model on the product page (200+ models supported) and the mount ships with the right top adapter. Same 3/4" narrow base, same slight forward extension.
Need more forward depth than the default extension? Pair your narrow mount with an extension piece from the Fixed Mount add-ons collection. Custom lengths available.
A narrow trim doorbell mount is a fixed (non-adjustable) 3D-printed bracket with an intentionally slim base — typically 3/4" or 9/16" wide — designed to fit on narrow door frames, storm-door trim, pilasters, and tight install spots where a standard-width mount is too wide. The mount holds the doorbell straight out from the wall with a slight default extension.
Most narrow trim mounts use a 3/4-inch wide base, with 2-inch screw-hole spacing. A few specialty mounts go even narrower (9/16"). If your trim is narrower than 9/16", contact us — we can sometimes do a custom-thin design.
Use a narrow trim mount when your existing door trim is too slim for a standard-width mount, or when your doorbell needs to sit on a narrow pilaster next to a storm door. If you also need a fixed angle, see our Wedge Mounts or Fixed Corner Mounts. If you need adjustability after install, see Adjustable Swivel Mounts — some have narrow-base options too.
Ring (all generations including 2025/2026 Wired, Wired Plus, Wired Pro, Wired Pro PoE, Battery, Battery Plus, Battery Pro), Google Nest (Wired and Battery), Eufy, Blink (1st and 2nd Gen), Wyze (v1, v2, Pro), Lorex, SimpliSafe, Reolink, Arlo, Xfinity, Ubiquiti UniFi, TP-Link Tapo, Aqara, Ecobee, AOSU, Chamberlain myQ, Roku, Logitech Circle View, and more. Pick your model on the product page.
Add the Custom Hole Spacing service from the Fixed Mount add-ons. Provide your exact center-to-center hole spacing and the mount ships with matching holes — no new drilling needed.
Yes. Pair your narrow trim mount with an extension piece (more forward depth) or an angle adapter (horizontal aiming). Both are in the Fixed Mount Add-ons collection.
The narrow base attaches to your door trim using the existing screw holes from your old doorbell (2-inch spacing standard). The custom-fit top adapter bracket attaches to the front of the mount. For wired doorbells, route the wire through the wire pass-through. Only a Phillips screwdriver is required.
Black by default. Wyze and SimpliSafe brands default to White. Other colors via the Color Change Request add-on at checkout.
If your door trim is too slim for a standard mount, our Narrow Trim Doorbell Mounts give you a clean, secure install that fits where other mounts won't. Pick your doorbell model, add an extension or angle add-on if needed, and we'll 3D-print it to your spec.
Unsure which narrow mount fits your trim width or doorbell model? Send photos of your install area — we'll confirm fit.
Standard Color: Black by default (White for Wyze/SimpliSafe). Other colors via the Color Change Request add-on.
Doorbell Not Included: All listings are for the mounting accessories only. The video doorbell device must be purchased separately.
Model Selection Is Crucial: Select your specific doorbell model on the product page to receive the correct custom-fit adapter bracket.
Check Dimensions: Ensure your trim width is >= 9/16" or >= 3/4" for the chosen narrow base mount.
3D Printed Quality: Made from durable PETG using 3D printing. Minor cosmetic variations or layer lines may be visible but do not affect durability or function.
