Ecobee Doorbell Full Offset Brick Extension Mount | Max Clearance
Compatibility: Ecobee Smart Doorbell Camera (Wired) ONLY!
- Fits ONLY: The **Ecobee Smart Doorbell Camera (Wired)**.
- Confirm your model matches the picture below:
-
(Example Image - Click for Amazon Link. As an Amazon Associate, I earn from qualifying purchases.) - WILL NOT FIT: Any other Ecobee products or doorbells from other brands.
- Surface Width: Requires mounting surface (trim/molding) to be AT LEAST 9/16 inches wide for the base.
Please double-check your Ecobee model before ordering!
Enhanced Security & Maximum Clearance for Ecobee Doorbell
Is your Ecobee Smart Doorbell Camera mounted on trim recessed behind brick? Need maximum clearance from a tight door swing or storm door? This **Full Offset Brick Extension Mount** is engineered for these challenging installations!
It extends your Ecobee doorbell forward past the brick (select required length) and uses our unique **Full Offset** design to shift the doorbell entirely sideways over the brick face, maximizing space. Installs easily on narrow trim (>= 9/16" wide) without drilling into masonry.
How it Works: Full Offset (Maximum Sideways Shift)
This mount utilizes our unique FULL OFFSET geometry. Your Ecobee Doorbell attaches so its door-facing edge aligns flush with the side edge of the narrow 9/16" mount base. This provides the maximum possible horizontal shift over adjacent brick compared to our Standard Offset mounts.
This is the best choice when maximum clearance from a door swing or storm door is critical. The offset is reversible for left or right side mounting.
This mount positions the doorbell over or in front of the brick face.
Full Offset (This Product) vs Standard Offset:
Need standard (less) offset? Click here for the Standard Offset version for the Ecobee Doorbell.Base Dimensions & Mounting: The extension base is 9/16 inches wide (requires >= 9/16" surface). Standard mounting hole spacing is 2.5 inches (center-to-center). Ensure solid mounting on trim. Wall-mounting screws not included.
Angled Trim? If your trim is angled, add our Angle Shims (sold separately) for a perpendicular installation.
CRITICAL: Measure & Select Your Extension Length!
Choose the correct length to clear your brickwork or storm door. Measure carefully:
- Measure the exact distance straight out from the surface where the mount base will attach (your trim) to the outermost face of your brick or obstacle.
- Order THIS measurement as your required Extension Length. (Do NOT subtract doorbell thickness for offset mounts).
Select the required extension length from the dropdown menu when ordering. (Starts at 1/4 inch).
Need help measuring? Text/email a picture! (Contact info below)
Measure like this from Trim to Brick Face for Extension Length.
Key Features & Benefits:
- Maximum Sideways Offset: Full Offset design provides ultimate door swing clearance.
- Tailored for Ecobee Smart Doorbell Camera: Ensures compatibility with the wired model.
- "Over Brick" Placement: Extends doorbell forward past brick and positions it fully over the brick face.
- Avoid Drilling Brick: Mounts to existing trim (>=9/16" wide, Std. 2.5" hole spacing).
- Selectable Extension Length: Order the precise depth based on Trim-to-Brick/Obstacle measurement.
- Narrow Base (9/16" Std): Designed for tight trim installations.
- Wire Passthrough: Internal channel neatly accommodates Ecobee wiring.
- Reversible Offset: Base can be flipped for left or right offset.
- Durable PETG Construction: Strong, weather-resistant plastic.
- Add-on Compatible: Works with angle shims, fillers etc. (see below).
- Future-Proof Bracket: Top adapter bracket potentially replaceable for future upgrades (check compatibility).
How to Install Your Full Offset Extension for Ecobee
This mount uses two main printed pieces: the Extension Base (with Full Offset) and the Doorbell Adapter Bracket.
-
Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed), your Ecobee doorbell backplate/wedge & hardware.
Turn OFF power at the breaker!
-
Mount Extension Base: Position the Extension Base (correct length/offset) on trim over wires (ensure Full Offset provides max clearance needed). Attach securely using appropriate screws (#6 size likely, use PH2) and anchors into the 2.5" spaced holes.
Ensure base is level. Don't overtighten.
-
Attach Doorbell Adapter Bracket: Route wires through the Doorbell Adapter Bracket (top piece for Ecobee). Align onto Extension Base. Attach using the four small center screws provided (likely #4 screws / PH1 driver).
Use correct PH1 bit. Tighten until flush. Check for/clear debris if needed. Do NOT over-torque.
-
Attach Ecobee Backplate/Wedge: Secure the **backplate or wedge that came WITH your Ecobee Doorbell** onto the Doorbell Adapter Bracket using the small screws PROVIDED WITH THIS MOUNT (typically #4 / PH1). Ensure correct orientation per Ecobee instructions.
Do NOT use Ecobee's long wall screws here. Use correct PH1 driver.
- Wire & Mount Ecobee Doorbell: Connect wires to the Ecobee backplate/wedge following Ecobee instructions. Attach the Ecobee Doorbell unit onto its backplate.
- Final Check & Power On: Ensure doorbell is secure. Turn power back on and test.
Follow safety rules & Ecobee guidelines. Use correct anchors/screws. Correct screwdriver size prevents stripping.
Why Choose the Ecobee Doorbell Brick Extension?
Perfect Fit for Brick Surfaces
This Full Offset Ecobee Doorbell Brick Extension is specifically designed for homes with brick surfaces near trim. The 9/16-inch wide base allows secure mounting, while the full offset ensures your Ecobee Doorbell sits perfectly beyond the brick's edge for optimal visibility and functionality.
Easy Installation Process
Installing the Ecobee Doorbell Brick Extension is straightforward onto existing trim. It's designed for DIY enthusiasts, allowing quick setup without needing professional help to enhance your home security.
Versatile Lengths & Durable Design
Select the perfect extension length for your specific needs, ensuring your doorbell is positioned correctly past obstructions. Made from durable, weather-resistant PETG, this mount is built to last and withstand the elements, providing reliable performance year-round.
Optional Add-ons & Accessories:
Further customize your installation:
-
Angle Shims (5°, 10°, 15°)Corrects for angled trim *under the Extension Base*.
-
Horizontal Angle Adapter or Swivel Add-onAdd horizontal angle adjustment to the end of the extension.
-
Bottom Filler Spacer PlateFills the gap below the extension base on angled/uneven trim.
-
Body Shim Filler PlateFills gaps between the extension body and uneven brick.
-
Add Side Wire EntryAdds side entry holes ("mouse holes") to the *Extension Base* (add service to cart).
-
Wire Extension Kit
Need longer wires? Purchase our extension wire kit with your choice of connectors.
-
Custom Color
Standard color is Black. For White, Brown, Grey, etc., add this service.
Product Examples
(See listing photos for details or contact us for more examples!)
Need Help? Confirm Compatibility & Measurements!
Ensure you have the Ecobee Smart Doorbell Camera (Wired). Need help measuring extension length or choosing Full vs Standard Offset?
- Email: shop@doorbellmount.com (Send Pictures!)
- Text/Call: 1-833-326-6868 (Text Pictures!)
Standard Color: Black. For other colors, add the Color Change Request item.
Doorbell Not Included. Includes the 2-piece extension mount (Extension Base + Doorbell Adapter Bracket) and necessary assembly screws.
PETG Material: Printed in durable, outdoor-rated PETG.
3D Printed Quality: Minor cosmetic variations inherent to 3D printing may exist but do not affect function. Contact us with quality concerns before reviewing.
Order the Full Offset Brick Extension for maximum clearance with your Ecobee Smart Doorbell Camera! Remember to measure carefully (Trim to Brick Face!) and select your required extension length.
