Corner Mount

Corner Doorbell Mount Angled 30º 1in Fixed Trim Narrow/Slim Mount for Larger Doorbells

Fixed Mount - Available with Angle Adapters Or No Angle Straight Out.

$32.50 USD

~~$35.00 USD~~ $32.50 USD

Sale Sold out

Shipping calculated at checkout.

Quantity

Doorbell Corner Mount (30° Fixed Angle) | For Small Doorbells

Designed for Corners & Narrow Trim! Select Your Doorbell.

This mount provides a fixed **30-degree angle** and positions your doorbell approximately **1 inch out from the corner**. Its **narrow 3/4-inch base** is perfect for tight corner installations or slim door trim, especially useful for fitting around storm door frames.

CRITICAL: You MUST Select Your Specific Doorbell Model from the options list. We provide a custom-fitted top adapter bracket.
Ideal for Doorbells < 2 inches wide: Perfect for SimpliSafe, Eufy, Blink, Logitech, Google Nest Hello, Ring Pro/Wired (non-battery), and other compact models when installed flush in a 90° corner. (The mount's design naturally offsets the doorbell center approx. 0.854" from the corner vertex).
For Wider Doorbells (e.g., Ring Battery models ~2.5" wide): This mount can still work! The base will need to be installed slightly **offset from the absolute corner** (e.g., 1/4" to 3/4" away from one corner edge) to allow the wider doorbell to fit without overhanging into the walkway or hitting the door.
FITMENT WARNING: If your trim is extremely narrow and very close to a door swing, any doorbell could be an obstruction. Please send pictures of your mounting area and doorbell for a fit assessment BEFORE ordering if you have any doubts.

Enhance Your Security with the SimpliSafe Doorbell Corner Mount

Struggling to mount your SimpliSafe or other compact video doorbell effectively in a corner or on very slim trim near a storm door? This **Fixed 30° Corner Mount** is engineered for these challenging placements! Its narrow 3/4" base fits where others can't, while the design provides a 30-degree outward angle and positions the doorbell about 1 inch forward from the corner vertex.

This ensures your camera captures the desired approach, improving visibility and security. The wire passthrough allows for a clean installation for wired doorbells like the SimpliSafe.

Mount Specifications

Fixed Angle: Provides a **30-degree horizontal angle** (angled outward from the corner).
Design: "S-Shaped" (or similar corner-fit design) for optimal positioning.
Extension from Corner: Positions doorbell approx. **1 inch forward** from the corner point.
Base Wall Footprint Width: 3/4 inches (0.75").
Base Wall Footprint Length: Approx. 2.5 inches.
Base Mounting Hole Spacing: Standard **2 inches** (center-to-center). (Customizable via add-on service).
Effective Offset: The mount's center is offset ~0.854" from the corner vertex, fitting doorbells up to ~2" wide flush in a 90° corner. Wider doorbells require the mount itself to be slightly offset from the corner.

Key Features & Benefits:

30° Fixed Outward Angle: Ideal for directing camera view from corner installations.
Optimized Corner Placement: Design helps clear storm door frames and fit tight spaces.
Ultra-Narrow 3/4" Base: Fits 98% of tight corners and on slim door trim.
Standard 2" Hole Spacing: Often matches existing doorbell button holes (customizable).
Requires Doorbell Model Selection: Ensures you receive the correct pre-drilled top adapter bracket.
Internal Wire Passthrough: For a clean, professional look with wired doorbells.
Durable PETG Construction: Weather-resistant and significantly stronger than PLA for outdoor use.
Includes All Assembly Screws: For connecting the adapter bracket to the mount base.
Future-Proof System: Top adapter bracket is replaceable if you change doorbell models (available here).

Installing Your 30° Fixed Corner Mount

Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed), selected doorbell model & its specific hardware (if any for faceplate).
Turn OFF power at the breaker if hardwiring!
Position & Mount Angled Base: Place the **30° Corner Base** snugly into the corner, ensuring the 30° angle directs the doorbell as desired. Mark and drill pilot holes if needed. Secure the base to **one side** of the corner trim/wall using appropriate screws (#6 size likely, use PH2) and anchors through the 2" spaced holes.
Ensure base is level vertically. Do NOT overtighten wall screws. For wider doorbells (>2"), install base slightly offset from the corner as discussed in compatibility.
Attach Doorbell Adapter Bracket: Route wires through the **Doorbell Adapter Bracket** (specific to your selected doorbell). Align this bracket onto the angled face of the mounted Corner Base. Attach using the small screws provided (likely #4 screws / PH1 driver).
Tighten screws snugly until bracket is flush. Clear any plastic debris from pilot holes if necessary.
Wire Doorbell: Connect wires to your video doorbell per its manufacturer's instructions. Tuck excess wire.
Attach Doorbell to Adapter Bracket:
- Align your doorbell (or its specific backplate, if used with our adapter) with the pre-drilled holes on the custom Doorbell Adapter Bracket.
- Secure the doorbell/plate using the small screws PROVIDED WITH THIS MOUNT (typically #4 / PH1 driver).
- DO NOT USE screws that came with your doorbell for THIS step unless specifically for attaching its own plate to our adapter.
- Replace your doorbell's cover/faceplate if applicable.
Use correct PH1 driver for provided screws. Tighten gently to avoid stripping.
Final Check & Power On: Ensure doorbell is securely mounted. Turn power back on (if applicable) and test.

Follow safety rules & your doorbell's specific guidelines. Use appropriate wall anchors. Smallest extension (approx. 1" effective extension from corner) will be shipped unless custom extension length requested (additional cost applies).

Enhance Your Security with the SimpliSafe Doorbell Mount

Optimal Angling for Better Coverage

The SimpliSafe Doorbell Mount features an angled 30-degree design that allows for improved surveillance of your entryway. This helps to eliminate blind spots and ensures you can see anyone approaching your door. It fits seamlessly with most standard smaller doorbell cameras (like SimpliSafe), making it the perfect choice for those wanting effective home security solutions.

Durable and Weather-Resistant Material

This doorbell mount is constructed from high-quality PETG designed to withstand various weather conditions. Because it’s designed for exterior use, it is both sturdy and resistant to fading or corrosion. This ensures that your SimpliSafe (or similar) Doorbell Mount will continue to function well without deterioration over time.

Easy Installation with a Sleek Look

One of the standout features is how easy it is to install. The narrow and slim design allows for flexible mounting options in corners. It also comes with necessary hardware for assembly, so you can have your doorbell set up in no time. This effortless installation doesn't sacrifice aesthetics; the mount blends seamlessly with your home’s exterior.

Optional Add-ons & Customizations:

Enhance your installation:

Customize Base Hole Spacing
Need different spacing than the standard 2" for the base? Add this service and provide your measurements.
Further Extension from Corner
Need more than the standard ~1" effective extension from the corner? Contact us for custom length options (additional cost applies).
Custom Color
Standard Black (SimpliSafe/Wyze default White). For other colors, add this service (charges vary $2-$5).

Visualization & Installation Help

Product Image:

30 Degree S-Shaped Corner Doorbell Mount

Questions? Need Fit Confirmation or Customization?

Please send pictures of your doorbell and mounting area if you're unsure about fit, especially for corner placement and doorbell size! We can confirm if this mount or a custom solution is best.

Email: shop@doorbellmount.com (Send Pictures!)
Text/Call: 1-833-326-6868 (Text Pictures!)

Default Color: Black (Note: SimpliSafe and Wyze specific mounts often default to White - if this is a generic mount for those, Black is standard unless Color Change is added).

Doorbell Not Included. Includes the 30° angled corner mount base, doorbell-specific top adapter bracket, and assembly screws.

Material: Printed in durable, outdoor-rated PETG (superior to PLA).

3D Printed Quality: While usually fantastic, minor cosmetic imperfections are inherent to 3D printing and don't affect function. We'll gladly replace if you're unhappy with quality.

Order your 30° Fixed Corner Mount today for a perfect fit in tight spaces, especially for SimpliSafe and other smaller doorbells! Remember to select your doorbell model.