Full Offset Brick Extension for Ring Battery Doorbell Pro (2nd Gen, 2026) | Retinal 4K | Custom Depth | Storm Door Clearance

$64.00
$49.00
Full Offset Brick Extension for Ring Battery Doorbell Pro (2nd Gen, 2026) — 4K Wireless Flagship ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee Heavy-Duty Maximum Projection Brick Mount for the 4K...
Availability: Many In Stock
Product Type: Brick Mount

Full Offset Brick Extension for Ring Battery Doorbell Pro (2nd Gen, 2026) — 4K Wireless Flagship

✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee

Heavy-Duty Maximum Projection Brick Mount for the 4K Wireless Battery Pro 2nd Gen

The Battery Pro 2nd Gen is the first wireless 4K Ring doorbell with radar motion detection and a flagship sensor that needs an unobstructed view. This Full Offset Brick Extension projects the doorbell maximally out from the wall to clear wide storm doors, deep brick edges, or side-mount obstructions. The bottom remains open so the quick-release battery slides out for charging. Custom-cut depth from 1/4" to 8" in 1/8" increments.

Engineered for the Ring Battery Pro 2nd Gen (Amazon ASIN B0FPPWKMGK) with Retinal 4K, head-to-toe view, radar motion detection, and removable quick-release battery. 3D-printed in the USA from UV-stable PETG, freeze-tolerant. Free shipping over $100. Replacement Guarantee included.

Compatibility — Custom-Cut for the Ring Battery Doorbell Pro 2nd Gen (Retinal 4K)

  • This Full Offset extension is custom-cut for the Ring Battery Doorbell Pro (2nd Gen, 2026) — Amazon ASIN B0FPPWKMGK. Ring’s flagship wireless doorbell with Retinal 4K, head-to-toe view, radar motion detection, and a removable quick-release battery.
  • Does NOT fit: the Battery 2nd Gen, the Battery Plus 2nd Gen, the older Battery Pro 1st gen, the Ring Wired line, or the Ring Stick Up Cam. Each Ring model has its own dedicated Full Offset extension on our store.
  • Not sure which Ring you have? Send a photo of the back of your doorbell to shop@doorbellmount.com — we’ll confirm fit before you order.
Don’t have the doorbell yet? Buy the Ring Battery Doorbell Pro 2nd Gen on Amazon →

Full Offset vs. Standard Offset vs. Brick Face

This is the Full Offset variant — the deepest projection brick mount we make.

Pick the right offset for your install: Use Standard Offset Brick Mount ($38) for small bumps forward to clear a normal storm door. Use this Full Offset ($50-$140) when you need maximum projection — wide storm doors, brick edges, side-trim obstructions. Use Brick Face Extension ($30-$110) if your doorbell would be recessed BEHIND the brick face.

Full Offset Brick Extension Dimensions & Material

  • Front Face Width: Sized to fit your specific doorbell model
  • Base Width: 9/16 inch (slim profile, fits within standard wood trim)
  • Projection Depth: Custom-cut from 1/4 inch up to 8 inches in 1/8 inch increments
  • Pricing: Scales with depth from $50 (1/4") up to $140 (8")
  • Base Mounting: 2 holes, anchor in WOOD TRIM with #6 screws
  • Material: UV-stable PETG, 3D-printed in the USA, freeze-tolerant

Key Features & Benefits

  • Custom-Cut Depth: 52 sizes from 1/4" to 8" in 1/8" increments.
  • Maximum Storm-Door Clearance: Full Offset projects further than Standard Offset.
  • Quick-Release Battery Stays Accessible: Bottom slides out for charging without unmounting.
  • Heavy-Duty Build: Sized for the flagship 4K Battery Pro body and weight.
  • Trim-Mount Rear: Back anchors into wood trim with 2 #6 screws.
  • Radar Motion Compatible: Passive PETG part won’t interfere with radar sensor.
  • Complete Hardware Kit: 2× #6 base screws, 4× #4 small screws, doorbell-mount screws.
  • UV-Stable PETG: Freeze-tolerant - real-world installs at 4+ years.
  • Made in the USA: 3D-printed to-order.
  • Replacement Guarantee: Free depth swap if measurement is off.

Customization & Add-On Options

Installing Your Full Offset Brick Extension on the Ring Battery Doorbell Pro 2nd Gen

  1. Prepare: Pop the battery out of the existing doorbell and set it aside. No wiring to disconnect.
    Battery Pro 2nd Gen uses a removable quick-release battery and supports radar motion detection. Battery slides out the bottom for charging.
  2. Wire Routing (Optional): Battery installs - skip wiring. If using a trickle-charge cable, lead it through the rear of the extension.
  3. Mount the Extension Base: Position the back of the extension over the wood trim. The base anchors with 2 provided #6 wood screws using a #2 Phillips screwdriver.
    For the Battery Pro flagship: pre-drill 1/8 inch pilot holes for projections over 4 inches. Heavier doorbell - drive the optional brick face anchor screw too.
  4. Attach the Mounting Bracket: Fasten the Battery Pro 2nd Gen adapter bracket using the 4 small #4 center screws. USE #1 Phillips PRECISION screwdriver.
  5. Mount the Doorbell: Slot the Battery Pro 2nd Gen body onto the front face. Verify the quick-release battery slot stays clear.
  6. Secure and Finalize: Mount the doorbell using PROVIDED screws. Reinstall cover. Apply silicone caulk if needed (skip bottom for drainage). Open Ring app → Live View. Verify framing and redraw motion zones (4K radar setup).

Tools recap: #2 Phillips, #1 Phillips PRECISION, drill (recommended for Pro), level, clear silicone caulk.

FAQ — Ring Battery Doorbell Pro 2nd Gen Full Offset Brick Extension

Will this Full Offset fit the Ring Battery Doorbell Pro 2nd Gen?
Yes. The front-face mounting plate is shaped for the Ring Battery Doorbell Pro 2nd Gen (Amazon ASIN B0FPPWKMGK).
How much projection does Full Offset give compared to Standard Offset?
Full Offset projects roughly 1-1/8 inches further out than Standard Offset. Standard Offset $38-$120. Full Offset $50-$140.
Will the quick-release battery still come out for charging?
Yes. The bottom of the extension stays open so the Battery Pro 2nd Gen quick-release slot is fully accessible.
Does the extension interfere with radar motion detection?
No. The PETG extension is a passive part with no electronics and is invisible to radar. The Pro 2nd Gen radar motion sensor performs identically.
What if I order the wrong depth?
Send us a picture before installing. Under our Replacement Guarantee, we will ship the correct depth at NO additional cost.
Is the brick extension weatherproof?
Yes - UV-stable PETG, freeze-tolerant. Real-world installs are 4+ years and counting.
Do I lose any Ring features using this extension?
No. All Ring Battery Doorbell Pro 2nd Gen features - Retinal 4K, head-to-toe view, radar motion, Live View - work exactly as on the stock plate.
What depths are available?
From 1/4 inch to 8 inches in 1/8 inch increments. Default 3 inch. Pricing $50-$140.

✔ Replacement Guarantee — The Right Depth, Guaranteed

Send a picture of your install area BEFORE you order. We’ll confirm the exact depth that fits. If you order and the depth is wrong, we’ll send the correct one at NO ADDITIONAL COST.

Covers fitment/depth issues only.

Need to Buy the Doorbell, Tools, or Caulk?

Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you.

Questions? Need Help Picking the Right Depth?

Standard Color: Ships in Black. For brick-matching prints (red, tan, gray), use the Color Change Request.

Install Note: Base mounts into wood trim with #6 screws.

3D-Printed Parts: Minor cosmetic variations or layer lines may be present.

Order your Full Offset Brick Extension for the Ring Battery Doorbell Pro 2nd Gen today — maximum storm-door clearance, free shipping over $100, Replacement Guarantee included.