Narrow Trim Fixed Mounts
Slim 3/4" or 9/16" wide base for door frames and storm-door areas where standard mounts won't fit. Default ~3/8" forward extension with optional add-ons for more depth.
Fixed Trim Slim/Narrow Mount for Ring Battery Doorbell Pro (2nd Gen) (2nd Gen, 2026) | Retinal 4K | Narrow Trim Fit
Narrow Fixed Trim Doorbell Mount for the Ring Battery Doorbell Pro (2nd Gen) — Low-Profile Fit for Tight Trim ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3...
$29.50
Fixed Trim Slim/Narrow Mount for Ring Battery Doorbell Plus (2nd Gen) (2nd Gen, 2026) | Retinal 2K | Narrow Trim Fit
Slim Fixed Trim Mount for the Ring Battery Doorbell Plus (2nd Gen) — Fits Narrow & Uneven Door Trim ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3...
$29.50
Fixed Trim Slim/Narrow Mount for Ring Wired Doorbell Pro PoE (2026) | Retinal 4K + PoE | Narrow Trim Fit
Fixed Trim Mount (Slim/Narrow) for the Ring Wired Doorbell Pro PoE — Made for Uneven Trim & Tight Spaces ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3...
$29.50
Fixed Trim Slim/Narrow Mount for Ring Wired Doorbell (2nd Gen) (2nd Gen, 2026) | Retinal 2K | Narrow Trim Fit
Fixed Trim Slim/Narrow Doorbell Mount for the Ring Wired Doorbell (2nd Gen) — For Uneven Trim & Tight Door Frames ✔ Made in USA✔ Free Shipping Over $100✔ Ships in...
$29.50
Customization Add-On: Change Base Length for Fixed or Corner Mount
Narrow Doorbell Fixed Mount Customization Add-On Need a perfect fit for your Fixed Trim or Corner Mount on non-standard trim? Customize the base width with this essential add-on! Our standard...
$0.00
Customization Add-On: Change Base Length for Fixed or Corner Mounts
Narrow Doorbell Fixed Mount Customization Add-On Need a perfect fit for your Fixed Trim or Corner Mount on non-standard trim? Customize the base width with this essential add-on! Our standard...
$5.00
Fixed Doorbell Mounts | Non-Adjustable Brackets for Every Install
Fixed (Non-Adjustable) Mounts for Video Doorbells
Fixed Doorbell Mounts are 3D-printed brackets that hold your video doorbell at a permanent, locked position — no swivel, no pivot, no moving parts. They're the right choice when your install is straightforward, your viewing angle is already correct, or you want a clean, low-profile look without the added bulk of an adjustable swivel.
This umbrella collection covers every fixed-style mount we make: narrow trim mounts for slim door frames, fixed corner mounts at preset angles (15°, 30°, 45°, 60°), wedge mounts for fixed horizontal or vertical angle correction, heavy duty mounts for deeper extensions, and fixed extension pieces + angle adapter add-ons.
On every Fixed Mount product page, select your specific doorbell model. The mount ships with a custom-fit top adapter bracket sized to your doorbell.
Why DoorbellMount.com Fixed Mounts
- Fits 20+ brands: Ring, Google Nest, Eufy, Blink, Wyze, Lorex, SimpliSafe, Reolink, Arlo, Xfinity, Ubiquiti, TP-Link Tapo, Aqara, AOSU, Chamberlain myQ, Ecobee, Roku, Logitech, and more.
- Multiple style families: Narrow trim, corner, wedge, heavy duty, and extension add-ons — covered in this collection and the sub-collections below.
- Hidden screw design: Wall mounting screws are concealed behind the doorbell bracket for a clean finish.
- Outdoor PETG, USA-made: 3D-printed to order from weather-resistant filament.
- Customizable: Add a fixed extension piece for more depth, an angle adapter for horizontal aiming, or custom hole spacing to match existing screw holes.
- Wire pass-through: Clean cable management for hardwired doorbells.
Pick the Right Fixed Mount Style
| Style | Best For | Profile | Shop |
|---|---|---|---|
| Narrow Trim | Slim door frames, storm-door areas, tight spots | Low-profile, ~3/8" forward of wall | Shop Narrow Trim |
| Fixed Corner | Mounting directly into a 90° corner; preset 15°, 30°, 45°, or 60° outward angle | Narrow base, ~1" from corner | Shop Corner Mounts |
| Wedge | Fixed horizontal or vertical angle correction on flat trim or siding | Compact wedge profile | Shop Wedge Mounts |
| Add-ons | Extension pieces, angle adapters, gang box bases, hole-spacing customization | Combine with any fixed base | Shop Fixed Mount Add-ons |
| Need to pivot? | If you need adjustability after install, see Adjustable Swivel Mounts | Pivots horizontally + vertically | Shop Adjustable Swivel |
Explore Our Fixed Mount Sub-Collections
Click "Shop This Style" to view the products. Select your specific doorbell model on each product page for a custom-fit adapter bracket.
Fixed Corner Mounts
Preset 15°, 30°, 45°, or 60° outward angle for corner installs. Narrow 3/4" base. Choose your angle and doorbell model on the product page.
Wedge Mounts
Fixed horizontal (15°, 30°, 45°, 60°, 75°) or vertical (5°, 10°, 15°) angle wedges. Perfect when you know exactly the angle you need and want a clean, simple mount.
Add-ons: Extensions, Angles, Hole Spacing
Extension pieces for more depth, angle adapters for horizontal aiming, custom hole spacing to match existing screw locations, and gang box bases for wired doorbells.
What Is a Fixed Doorbell Mount?
A fixed doorbell mount is a non-adjustable bracket that holds your video doorbell at a single, permanent position. Unlike adjustable swivel mounts, fixed mounts have no pivot or moving parts — the angle and depth are baked into the bracket. This gives them a smaller profile, fewer points of failure, and a cleaner look. Fixed mounts are the right choice when your installation is straightforward and the viewing angle is already correct, or when you want the simplest possible bracket.
When Should I Choose a Fixed Mount over Adjustable?
Choose fixed when your doorbell will face the same direction every day, when you want the cleanest visual look (especially for narrow trim), when you know exactly the angle you need (in which case a wedge solves it), or when the install is into a corner with a predictable outward angle. Choose Adjustable Swivel Mounts when you need to re-aim the camera later, when the install is on a side wall, or when you're not sure of the final angle yet.
How Do I Install a Fixed Doorbell Mount?
The mount attaches to your wall or door trim using the screws from your old doorbell. The custom-fit top adapter bracket clips or screws onto the front of the mount. Wired doorbells route through the wire pass-through. Standard hole spacing is 2 inches center-to-center; if your old holes don't match, add the Custom Hole Spacing service so the mount matches your existing holes — no new drilling needed.
Frequently Asked Questions
What is a fixed doorbell mount?
A fixed doorbell mount is a non-adjustable 3D-printed bracket that holds your video doorbell at a single permanent position. There's no swivel, pivot, or moving parts. The angle and depth are determined by the mount you choose. Fixed mounts are simpler, more compact, and lower-profile than adjustable mounts.
When should I choose fixed over an adjustable swivel?
Choose fixed when your install is straightforward and the viewing angle is already correct, when you want the cleanest low-profile look (especially on narrow trim), when you know the exact fixed angle you need (use a wedge), or when you're installing into a corner with a known outward angle. Choose Adjustable Swivel when you may want to re-aim the camera later or are installing on a side wall.
What's the difference between Narrow Trim, Fixed Corner, and Wedge?
Narrow Trim is a slim-base (3/4" or 9/16") mount for tight door frames — straight-out only. Fixed Corner mounts install directly into a 90° corner and project outward at a preset angle (15°, 30°, 45°, 60°). Wedge mounts attach to a flat surface and add a fixed horizontal or vertical angle to your doorbell — pick one when you don't need corner-specific geometry but you do need a fixed angle.
Which doorbells are compatible?
Fixed mounts are available for Ring (all generations including 2025/2026 Wired, Wired Plus, Wired Pro, Wired Pro PoE, Battery, Battery Plus, Battery Pro), Google Nest (Wired and Battery), Eufy (E340, S330, C30, C31, S220), Blink (1st and 2nd Gen), Wyze (v1, v2, Pro), Lorex, SimpliSafe, Reolink, Arlo, Xfinity, Ubiquiti UniFi, TP-Link Tapo, Aqara, Ecobee, AOSU, Chamberlain myQ, Roku, Logitech Circle View, and more.
How do I install a fixed doorbell mount?
The mount attaches to your trim or wall with the screws from your old doorbell — standard 2-inch hole spacing. The custom-fit top adapter bracket attaches to the front of the mount. For wired doorbells, route the wire through the wire pass-through. Only a Phillips screwdriver is required.
Can I add an extension or angle to a fixed mount?
Yes. See our Fixed Mount Add-ons for extension pieces (more forward depth), horizontal angle adapters, vertical angle adapters, gang box bases for wired doorbells, and custom hole-spacing services.
What if my mounting holes don't match the 2-inch standard?
Add the Custom Hole Spacing service from the add-ons collection. Provide your exact center-to-center measurement and the mount ships with holes that match — no new drilling required.
What color does it ship in?
Black by default. Some brands like Wyze and SimpliSafe default to White. Other colors are available via the Color Change Request add-on at checkout.
The Right Fixed Mount for Every Install
Whether you need slim trim coverage, corner-specific geometry, a fixed angle wedge, or extension add-ons, our Fixed Doorbell Mounts plus the custom-fit adapter system have you covered. Pick the sub-collection that matches your install, then select your doorbell model.
Questions About Fixed Mounts or Customization?
Unsure which fixed style fits your space, or need help identifying your doorbell model?
- Email: shop@doorbellmount.com (send photos of your mounting area & doorbell)
- Text or Call: 1-833-326-6868 (text photos!)
Standard Color: Most Fixed Mounts ship in Black (White default for Wyze/SimpliSafe). Other colors via the Color Change Request add-on.
Doorbell Not Included: All listings are for the mounting accessories only. The video doorbell device must be purchased separately.
Model Selection Is Crucial: Select your specific doorbell model on the product page to receive the correct custom-fit top adapter bracket.
3D Printed Quality: Made from durable PETG using 3D printing. Minor cosmetic variations or layer lines may be visible but do not affect durability or function.
