0-35° Adjustable Mount for the Tapo D230S1 (Battery Video Doorbell + Hub)
Made for the Tapo D230S1 Smart Battery Video Doorbell Kit — the 2K 5MP wireless model that ships with a removable 6700mAh battery and a separate sub-G chime/hub. The bracket is shaped specifically for the D230S1's older body (different from the D210/D225/D235 family) so it sits flush and the rear battery door stays accessible. 0-35° dual-axis ball joint aims the 4:3 head-to-toe frame in two directions. Outdoor PETG, made-to-order in the USA.
Custom-Fit for the Tapo D230S1 (with Hub Kit)
This bracket is shaped specifically for the Tapo D230S1 Smart Battery Video Doorbell — Amazon ASIN B0CB1Z5Q1L (sub-G chime/hub included). TP-Link's previous-gen battery doorbell with 2K 5MP resolution, 4:3 head-to-toe aspect ratio, removable rechargeable 6700mAh battery (~6 months per charge), full-color night vision spotlight, IP64 rating, free AI person detection, two-way audio, microSD or Tapo Care cloud storage. The kit includes a separate sub-G hub that doubles as a chime — sub-G connection means longer range and lower latency than Wi-Fi-only doorbells.
Does NOT fit: the Tapo D210/D225/D235 (newer body shape, integrated battery, USB-C charging) or the Tapo D130 (wired-only). Each Tapo model family has its own dedicated mount listing. Also does not fit Ring, Nest, Wyze, Eufy, Aqara, or any non-Tapo brand.
Confused which Tapo you have? The D230S1 ships in a kit box with TWO devices — the doorbell AND a separate puck-shaped sub-G hub that doubles as the chime. If yours has only an integrated battery (no removable pack) and uses USB-C charging, that's a D210/D225 — different mount. If yours is wired-only with no battery option at all, that's a D130 — different mount.
Sub-G Hub + Removable Battery — A Different Beast
The D230S1 was Tapo's first serious battery doorbell, and it still has things the newer ones don't: a removable battery pack (so you can swap a charged spare in 10 seconds instead of pulling the whole doorbell off the wall), and a sub-G radio link to its bundled hub instead of pure Wi-Fi to the cloud.
That sub-G connection means the D230S1 talks to its hub through walls and across long yards in a way Wi-Fi-only doorbells can't match — the hub then bridges to your home network. The 4:3 aspect ratio with 160° diagonal view captures faces and packages in one frame. This 0-35° dual-axis swivel mount aims that frame at the actual porch instead of the siding next to it.
Two-Axis Aiming, 0-35° Range
One smooth ball joint. Aim left, right, up, or down — all the way to 35° in any direction. Lock the angle with set screws. Done.
Internal Wire Routing — Hidden & Protected
Low-voltage wires enter from the wall, pass through the hidden internal channel inside the ball-joint mount, route through the front adapter, and connect directly to the doorbell terminals. No exposed wiring, no weather risk.
Mount Dimensions
- Base Width: 1.8 inches
- Base Height: 3.1 inches
- Hole Spacing: 2-5/8 inches center-to-center
- Wall Extension at 0°: ~1.5 inches (low-profile)
- Narrow 3/4" baseplate option available for thin trim — see Customization below.
What You Get
- Custom Bracket for Tapo D230S1: Pre-shaped pocket fits the D230S1's older body geometry — flush mount, no rattle, no obstruction.
- Dual-Axis 0-35° Swivel: Aim the 4:3 head-to-toe 2K frame precisely; lock with set screws.
- Removable-Battery Friendly: Designed so the rear battery door stays reachable for 10-second swaps without unmounting the entire doorbell.
- Outdoor-Rated PETG: Matches the D230S1's IP64 rating.
- Hub Sits Indoors: Bracket only mounts the doorbell — the included sub-G hub plugs in indoors near your door (it's also the chime).
- Siding Compatible: Flat surfaces and lapped siding up to 1.8" wide.
- Universal Base: Future-proof — switch doorbells later for a ~$10 adapter swap.
Installing on the Tapo D230S1
- Set Up the Hub Indoors First: Plug the sub-G chime/hub indoors near the front door (within ~30ft of where the D230S1 will mount), pair to your 2.4GHz Wi-Fi via the Tapo app. The hub IS the chime AND the sub-G bridge.
- Charge the Battery: Pull the removable battery, charge to full via USB-C (~7 hours). Reinstall in the doorbell.
- Mount the Base: Position vertical or horizontal on your siding/trim, secure with #6 screws (PH2 driver). Anchors as needed.
- Attach the Swivel: Screw onto the base with four #4 / PH1 center screws. (No wires required — the D230S1 is battery-only by design.)
- Pair the Doorbell: Add the D230S1 to the Tapo app via the hub (sub-G discovery). Place a test press to confirm the hub chimes.
- Snap In + Aim & Lock: Use the screws PROVIDED WITH THIS MOUNT (PH1 driver). Live View → adjust until the 4:3 frame covers porch top-to-bottom → tighten set screws.
Cold-weather tip: removable battery is a real advantage in winter — you can pull and charge indoors instead of bringing the whole camera inside. Keep a spare battery on a USB-C charger for true zero-downtime operation.
Questions About Fitment?
- Email: shop@doorbellmount.com
- Text/Call: 1-833-326-6868
Standard Color: Ships in Black or White (Tapo doorbells ship in white). Other colors via Color Change Request.
Need to Buy Your Tapo Doorbell?
Quick affiliate links to the Tapo doorbell lineup on Amazon:
- Tapo D130 — 2K Wired Smart Doorbell, 180° Head-to-Toe View
- Tapo D210 — 2K Battery Doorbell w/ Chime, 160° View, 6-Month Battery
- Tapo D225 — 2K+ Wired or Battery, 180° View, 8-Month Battery
- Tapo D230S1 — 2K Battery + Hub Kit, Removable 6700mAh Battery
- Browse all Tapo doorbells on Amazon →
Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you. Pricing is controlled by Amazon and may change.
Angle Note: The 35° maximum is approximate; actual range varies slightly by surface and orientation.
3D-Printed Parts: Minor visible layer lines are normal and do not affect strength. Each mount is printed-to-order in our USA shop.
Get your Tapo D230S1 aimed at the right spot — order the dedicated mount today.
