Brick Extension
Brick Extension Mount - Standard Offset Brick Mount (Select Doorbell Model and Extension Distance Needed)
Brick Extension Mount - Standard Offset Brick Mount (Select Doorbell Model and Extension Distance Needed)
Available Multiple Angle Pieces and Extension Lengths.
Couldn't load pickup availability
Standard Offset Brick Extension Mount for Video Doorbells (Select Your Model)
Compatibility: Select Your Doorbell Model Below!
- This mount is compatible with many popular video doorbell brands like Ring, Eufy, Nest, Wyze, Reolink, Blink, Lorex, Google Nest, and more!
- CRITICAL: You MUST select your specific doorbell model from the options provided on this page. We will send the correct adapter plate pre-drilled for your chosen model.
- Intended Use: For mounting on trim/surfaces recessed behind brickwork to bring the doorbell forward AND provide a standard sideways offset.
- Is your model not listed or are you unsure? Please contact us (email/text) with a picture of your doorbell before ordering! (Contact info below)
Need help identifying a Ring model? Check our Ring Model Guide blog post.
Solve Recessed Doorbell Problems with Our Most Popular Extension!
Is your video doorbell installed on trim that's sunk behind your beautiful brick or stone? Does this make it hard to see, reach, or get a good camera angle? Our Standard Offset Brick Extension Mount is the perfect solution for countless homeowners facing this common problem!
This mount installs securely on your existing trim, extends your doorbell forward to clear the obstruction, and provides our standard sideways offset – all without needing to drill into your masonry. It's designed to work with a wide variety of doorbell models (just select yours from the options!).
How it Works: Standard 5/8" Offset Extension
This mount features our widely compatible STANDARD OFFSET. The center of the doorbell mounting plate is offset approximately 5/8 inches horizontally towards the brick/siding side, relative to the center of the extension base.
This typically leaves about 5/8 inches of the base visible on the side closest to the door frame (depending slightly on the doorbell width). It effectively moves most doorbells partially over the adjacent brick or siding, providing good clearance and an improved viewing angle for many situations.
This mount positions the doorbell over or in front of the brick face, not flush with it.
Standard Offset (This Product) vs Full Offset:
Base Dimensions & Mounting: The standard mounting base is 9/16 inches wide, fitting most narrow trim areas (requires >= 9/16" surface). Standard mounting hole spacing on the base is 2.5 inches (center-to-center). Ensure adequate flat mounting surface on trim for mounting. Use appropriate screws for your trim material (not included).
Angled Trim? If your mounting trim surface is angled and not perpendicular to the wall, add our Angle Shims (5°, 10°, 15° Options) to your order for a perfect vertical installation.
CRITICAL: Measure & Select Your Extension Length!
Choosing the correct extension length ensures the mount clears your brickwork, allowing the offset bracket to properly position your doorbell over the brick face. Please measure carefully:
- Measure the exact distance straight out from the surface where the mount base will attach (usually your recessed trim) to the outermost face of your brick.
- Order THIS measurement as your required Extension Length. (Do NOT subtract doorbell thickness for this Offset mount type).
This length ensures the extension arm reaches the brick face, allowing the standard offset bracket to position your doorbell correctly.
Select the required extension length from the dropdown menu when ordering. We offer various lengths (e.g., starting from 1/4 inch) to suit your needs.
Need help measuring? Text or email us a picture of your setup! (Contact info below)
Key Features & Benefits:
- Universal Compatibility (Select Model): Fits many popular doorbell models – just select yours from the list!
- Standard Offset Design (5/8"): Provides effective sideways offset for most common installation scenarios.
- "Over Brick" Placement: Extends doorbell forward past brick and positions it partially over the brick face.
- Avoid Drilling Brick: Mounts easily to your existing trim behind brickwork (Std. 2.5" hole spacing).
- Custom Extension Lengths: Order the precise depth needed based on your trim-to-brick-face measurement.
- Narrow Base (9/16" Std): Fits most standard trim widths (requires >= 9/16" surface).
- Clean Installation: Internal channel allows routing wires if needed.
- Durable PETG Construction: Strong, weather-resistant plastic for outdoor use.
- Expandable: Fully compatible with our range of add-on accessories (see below).
Why Choose the Standard Offset Extension?
This mount is our most popular brick extension solution for several reasons:
- Solves the #1 Problem: Effectively brings doorbells forward from deeply recessed trim to sit nicely positioned relative to the brick face.
- Improves View & Access: By moving the doorbell forward and slightly over the brick, it significantly improves the camera's viewing angle and makes the button easier to reach.
- Reduces Door Interference: The standard offset is often sufficient to move the doorbell out of the path of a swinging door or storm door.
- Easy Installation Concept: Mounts to your existing trim spot, avoiding the difficulty and potential damage of drilling into brick or mortar.
- Versatile: Works with a huge range of doorbell models when you select the correct option.
Optional Add-ons & Accessories:
Customize your installation further with these compatible add-ons:
-
Angle Shims (5°, 10°, 15°)Corrects for angled trim to ensure your extension points straight out. Select the angle needed.
-
Horizontal Angle Adapter or Swivel Add-onNeed to angle your doorbell horizontally at the end of the extension? Add a fixed angle adapter or a fully adjustable swivel piece.
-
Bottom Filler Spacer PlateFills the gap between the bottom of the extension base and angled trim or uneven surfaces for a cleaner look. Can be combined with angle shims.
-
Body Shim Filler PlateFills gaps between the side of the extension body and uneven brickwork for a more integrated appearance.
-
Add Bottom Mouse Hole Wire EntryNeed wires to enter from the bottom/side of the extension base instead of straight through the back? Add this modification.
Questions About Compatibility, Measuring, Model Selection, or Installation?
Unsure which doorbell model to select? Need help measuring the extension length or choosing add-ons? Send us a picture of your doorbell and mounting area!
- Email: shop@doorbellmount.com
- Text/Call: 1-833-326-6868
Standard Color: Black. Need a different color? Please purchase the separate Color Change Request listing along with this mount.
About 3D Printed Quality: This mount is produced using 3D printing (PETG), resulting in a strong, functional part ideal for outdoor use. Minor cosmetic variations or layer lines may be visible but do not affect durability or function. Your satisfaction is guaranteed – please reach out with any quality concerns before leaving a review!
Order your Standard Offset Brick Extension Mount today! Remember to select your doorbell model and carefully measure (Trim to Brick Face!) for the required extension length.
